变形观测与高精度测量机器人系统

介绍了中南大学自行研制开发的高精度测量机器人系统的组成，工作原理，以及该系统实现高精度观测所采取的主要措施；仪器室内检定，野外边频同测，高精度气象改正，周日观测等，同时以某电站大坝的变形观测为例，简单介绍该系统可达到的精度及工程应用领域。     

工业炉燃烧系统应用技术探讨

燃烧及其控制技术是各种火焰炉技术核心，强调高水平燃烧系统应对燃烧全过程进行控制，着重对燃烧系统点火、火焰监测、空燃比比例调节、燃烧过程各参数监控、炉温自动控制等各个方面内容进行了讨论介绍，最后用某天然气加热炉燃烧系统原理图及应用效果进行实例说明。     

新丰江大坝监测自动化系统的成功实施与现场维护

本文介绍了新丰江大坝监测自动化系统从失败走向成功的实施过程，强调了良好的工作环境以及精心的现场维护在大坝监测自动化应用中的重要性。     

一种评价机器磨损和润滑油质量的新方法

提出用表征大型机械系统健康状态的相对劣化度作为监控机械磨损状态和油品质量变化的综合判断指标，以便结合反映机器工作状态的其它因素，共同评定机器的健康状态。以柴油机为例，对监测得到的柴油机润滑油的铁谱参数、磨损金属元素含量和油品理化性能等数据进行综合分析和处理，所得相对劣化度的变化趋势，较准确地反映了柴油机的工作状况。该方法不仅简单实用，而且便于将油液监测技术与其他监测技术（如振动诊断技术）结合起来，用一统一指标描述机器的健康状况，达到监测和预报的目的，为开发基于多种监测技术的智能诊断系统打下基础。     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

Vibration Monitoring and Diagnosis of Pipe-line Pumps on Offshore Platforms

ＶｉｂｒａｔｉｏｎＭｏｎｉｔｏｒｉｎｇａｎｄＤｉａｇｎｏｓｉｓｏｆＰｉｐｅｌｉｎｅＰｕｍｐｓｏｎＯｆｓｈｏｒｅＰｌａｔｆｏｒｍｓＺｈｅｎｇＷｅｎＴｅｃｈｎｏｌｏｇｉｃａｌＦａｃｕｌｔｙｏｆＭａｉｎｔｅｎａｎｃｅＥｎｇｉｎｅｒｉｎｇＧｕａｎｇｚｈｏｕ...     

Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals

A vibration-acoustic method for diagnostics and monitoring of production processes such as cutting metals makes it possible compared with other methods to reduce the requirement for measuring equipment and it provides a computer representation of the results observed. The set of equipment suggested has low cost and it exhibits considerable flexibility compared with existing equipment. __________ Translated from Izmeritel’naya Tekhnika, No. 7, pp. 30–34, July, 2006.     

Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.     

区域内旱情监测站点的布设研究

本文对北京通州辖区范围内组织的大规模的土壤墒情调查数据进行总结。基于地理统计、空间分析以及统计学知识，分析了北京通州旱情分布形势。运用数值分类学的知识对测量数据进行了聚类分析，同时用DB(DaviesBouldin)指标准则研究了区域内合理布设旱情监测站的数量及位置，为建立旱情监测站点提供了理论依据。     

On-demand Virtual Neonatal Intensive Care units supporting rural, remote and urban healthcare with Bush Babies Broadband

Premature and ill term babies born in regional Australia must be moved to another hospital with Neonatal Intensive Care Unit (NICU) facilities. Transferred pre-term and critically ill term babies have higher mortality rates and much higher rates of long term disability than similar babies born in hospitals with NICU facilities. This paper details the Bush Babies Broadband project that aims to significantly improve the quality of treatment for babies born in rural, remote as well as urban areas by providing the first on-demand virtual NICU architecture in Australia. Real-time data collected from medical monitors and ventilators attached to the baby, audiovisual streams and static physiological data such as X-ray images are transmitted to the consulting Neonatologist to gain a better picture of the patient's condition than is currently available. The key contribution of this significant research is the infrastructure providing a mechanism for Neonatologists to receive information directly from a regional hospital, thereby preventing, in some cases, the immediate need to move the baby. A key benefit of this framework is that it is available to link regional hospitals with the supporting NICU Neonatologist ‘on demand’ eliminating the need to establish permanent point to point connections. This paper further describes the application of that architecture to a specific pilot connecting the Bathurst regional hospital with Neonatologists within the NICU at Nepean Hospital, Penrith Australia.