热带钢连轧机工作辊温度场和热凸度预报模型

采用一种具有较高精度的样条有限条法对轧制过程中工作辊的温度场和热凸度进行计算和预报。结果证明，该模型理论计算值与现场实测值吻合较好，可以较准确地计算和预报热带钢连轧机工作辊的热凸度。     

高纯超细氧化铝的制备

介绍一种利用氧化铝生产过程的中间物料———铝酸钠溶液 ,生产高纯超细氧化铝的方法 ,即利用钡盐净化铝酸钠溶液 ,得到A/S >10 0 0 0的精制溶液 ,再进行种分分解 ,得到超细Al(OH) 3 ,经过酸洗 ,最终得到纯度达 99 99% ,粒度 90 %小于 2 μm高纯超细氧化铝。     

利用非线性自适应技术检测微弱的瞬时信号

本文根据局部流形理论,提出了一类非线性自适应预测滤波模型。仿真结果显示,本文提出的自适应预测滤波模型具有很强的非线性近似能力,可以检测淹没在超混沌或杂波环境中的瞬时信号。     

Accuracy of teacher judgments in predicting oral reading fluency.

The relationship between teachers' judgments versus actual performance on curriculum-based measures in reading was examined. A total of 30 regular education teachers were asked to predict the oral reading fluency score of students along with a rating scale of reading subskills. Correlations between teacher judgment measures and student performance found that teachers were accurate reporters of student performance levels in reading. However, some questions were raised whether teachers were accurate at predicting the actual level of student oral reading fluency when effect sizes were used to compare teacher judgment and actual student performance. Recommendations for continued research in understanding the parameters of the accuracy of teacher judgment are made. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Structural integrity in electronics

With continuing miniaturisation, increased performance demands and the requirement to remove lead from solder alloys, the challenges to structural integrity and reliability of electronic equipment are substantial and increasing. This paper outlines typical features in electronic equipment of which the structural integrity community may be generally unaware. Potential failure modes in service are described, and the problems of scale and material characteristics are considered. Progress in the application of fracture mechanics to the life prediction of interconnections is reviewed. The limited evidence available suggests that the crack growth resistance of silver‐containing lead‐free solders is superior to that of the traditional Sn‐37Pb under cycle‐controlled conditions but there is no difference when time‐dependent conditions prevail. In several respects, it is contended that the electronics sector is faced with challenges at least equivalent to those encountered in gas turbines and nuclear power generation.     

Bayesian and Dempster-Shafer fusion

The Kalman Filter is traditionally viewed as a prediction-correction filtering algorithm. In this work we show that it can be viewed as a Bayesian fusion algorithm and derive it using Bayesian arguments. We begin with an outline of Bayes theory, using it to discuss well-known quantities such as priors, likelihood and posteriors, and we provide the basic Bayesian fusion equation. We derive the Kalman Filter from this equation using a novel method to evaluate the Chapman-Kolmogorov prediction integral. We then use the theory to fuse data from multiple sensors. Vying with this approach is the Dempster-Shafer theory, which deals with measures of “belief”, and is based on the nonclassical idea of “mass” as opposed to probability. Although these two measures look very similar, there are some differences. We point them out through outlining the ideas of the Dempster-Shafer theory and presenting the basic Dempster-Shafer fusion equation. Finally we compare the two methods, and discuss the relative merits and demerits using an illustrative example.     

铜在高纯净钢中析出过程的观察

利用透射电子显微镜观察了铜在高纯净钢中的析出过程，发现早期析出阶段有类B2结构的亚稳相出现，分析了铜在高纯净钢中的析出贯序，研究结果对分析铜在高纯净钢中的时效强化机理具有重要意义。     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.     

Ԥ���������ز����ʵķ���

本文根据物质平衡原理,对于定容和水驱凝析气藏提出了预测采收率的方法,并提出了凝析气藏的总采收率与干气和凝析油采收率的关系式。