潜油电动机滑行时间的自动测量

潜油电动机滑行时间是评定电动机装配质量的重要指标。鉴于手工测量电动机滑行时间存在效率低和误差较大的不足,设计了潜油电动机滑行时间自动测量系统。它通过分压电路和计算机自动测量系统测量潜油电动机定子上感应的电压变化状况,即可得到电动机滑行时间。用手工测量、波形分析和自动测量3种方法测量6种型号电动机的滑行时间,其中5种滑行时间长于3s,判定为合格;1种滑行时间短于3s,判定为不合格。3种方式测量的滑行时间具有较好的一致性,仅波形分析法得出的滑行时间比自动测量的滑行时间稍长,表明自动测量方法的精度和重复性可满足要求。     

Network traffic prediction based on a new time series model

Fast and accurate methods for predicting traffic properties and trend are essential for dynamic network resource management and congestion control. With the aim of performing online and feasible prediction of network traffic, this paper proposes a novel time series model, named adaptive autoregressive (AAR). This model is built upon an adaptive memory‐shortening technique and an adaptive‐order selection method originally developed by this study. Compared to the conventional one‐step ahead prediction using traditional Box–Jenkins time series models (e.g. AR, MA, ARMA, ARIMA and ARFIMA), performance results obtained from actual Internet traffic traces have demonstrated that the proposed AAR model is able to support online prediction of dynamic network traffic with reasonable accuracy and relatively low computation complexity. Copyright © 2005 John Wiley & Sons, Ltd.     

PDC钻头对录井的影响及应对措施

钻井技术水平的不断提高和PDC钻头的广泛使用给现场录井作业带来了新问题。与传统的三牙轮钻头相比,PDC钻头突出的特点是产生的岩屑稀少、细小甚至失真,给地质录井的岩屑采集、鉴定、识别以及油气层级别的判定、解释、评价带来了一系列困难。为此,结合PDC钻头在新疆塔河、松辽盆地、鄂尔多斯等地油田的使用及录井经验,从PDC钻头条件下岩屑特征和岩性特征的分析入手,阐述使用PDC钻头对气测录井、荧光录井的影响,总结了在PDC钻头条件下搞好录井作业的应对措施,并列举了提高录井技术水平的可行途径。     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

乳化酸+硝酸粉末酸压技术在泥灰岩储层中的应用

华北油田泥灰岩储层曾进行多种类型的酸化增产改造工艺,但均未取得理想效果。经过对泥灰岩地层进行大量的油藏地质、室内试验研究以及工程、地质技术人员的反复论证,优选出一种切实可行的酸压改造措施——前置液+高温乳化酸+固体硝酸酸压工艺。经过现场应用,收到了较好的增产效果,为华北油田泥灰岩储层改造措施找到了突破口。     

Gorillas (Gorilla gorilla) and Orangutans (Pongo pygmaeus) Encode Relevant Problem Features in a Tool-Using Task.

Two important elements in problem solving are the abilities to encode relevant task features and to combine multiple actions to achieve the goal. The authors investigated these 2 elements in a task in which gorillas (Gorilla gorilla) and orangutans (Pongo pygmaeus) had to use a tool to retrieve an out-of-reach reward. Subjects were able to select tools of an appropriate length to reach the reward even when the position of the reward and tools were not simultaneously visible. When presented with tools that were too short to retrieve the reward, subjects were more likely to refuse to use them than when tools were the appropriate length. Subjects were proficient at using tools in sequence to retrieve the reward. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fast dynamic casting

We describe a scheme for implementing dynamic casts suitable for systems where the performance and predictability of performance is essential. A dynamic cast from a base class to a derived class in an object‐oriented language can be performed quickly by having the linker assign an integer type ID to each class. A simple integer arithmetic operation verifies whether the cast is legal at run time. The type ID scheme presented uses the modulo function to check that one class derives from another. A 64‐bit type ID is sufficient to handle class hierarchies of large size at least nine levels of derivation deep. We also discuss the pointer adjustments required for a C++ dynamic_cast. All examples will be drawn from the C++ language. Copyright © 2005 John Wiley & Sons, Ltd.     

飞行时间二次离子质谱--强有力的表面、界面和薄膜分析手段

二次离子质谱（Secondary ion mass spectrometry，简称SIMS）是一种对表面灵敏的质谱技术，建立在表面各种类型带正、负电荷原子或分子发射的基础上。用飞行时间（Time of flight，简称TOF）仪器对这些二次离子进行质量分析，能确保并行质量登录、高质量范围、高流通率下的高分辨和精确质量测定这些优异性能。配合细聚焦扫描一次离子束，可在优于1nm的高深度分辨和优于50nm的横向分辨本领下，实现对表面优于单层ppm(百万分之一）量级的极高检测灵敏度。当今TOF－SIMS已发展为一种成熟且完善的表面分析技术。极高的灵敏度，再加上即使对大分子及不易挥发性分子都独具的敏感性，使它成为很多高技术领域不可缺少的分析手段，这些领域包括微电子学、化学和材料科学以至纳米技术和生命科学等。本文简述了TOF－SIMS的原理、仪器及其多方面的应用和展望。     

实用宽带新技术

简要介绍了三种宽带新技术及其应用，包括替代五类线的VDSL，可解决HFC上行噪音漏斗效应的SCDMA技术以及利用电源线传输高速数据的PLC技术。这些新技术由于具有较高的性能价值比和广阔的应用前景，受到了广泛的关注。