某地铁站中央空调空调水系统节能技术改造方案

本文针对某地铁站中央空调水系统工程分析了目前系统中水泵的能耗起因，并提出了改造水泵降低能耗的具体方法，与改造前系统水泵能耗相比降低了56％。     

基于ADμC834芯片热泵热水机组控制器的研制

热泵热水机组是一种新型热水和供暖产品,它可以从空气、水等环境中吸取能量,热效率高,被公为是传统锅炉、电热水器及燃油(气)热水机组的更新换代环保型产品。详细阐述了以ADμC834芯片为核心的热泵热水机组控制器软硬件系统设计。论述了多路温度数据与压力数据采集、液晶显示等模块的硬件组成及各个模块的工作原理。控制器的软件系统采用前后台架构,用QuickStart平台开发完成。其人机界面系统由按键阵列和TG2401286V2型液晶显示屏组成。     

加工矿用液压支柱工艺设备的改进

通过对加工矿用液压支柱工艺设备润滑系统的综合分析,提出了用潜水电泵替代原机床配套的螺杆油泵构想。改造后,年节约资金5.9万元。     

地面驱动螺杆泵恒液面控制方法

恒液面控制有利于提高泵效,降低抽油杆柱和泵等设备的失效率。为此结合地面控制装置,研究了一种控制方法和软件。该软件根据控制装置实时测量的转速、扭矩等参数并结合地层开采能力、杆泵型号等参数,分析计算出液面高度和控制范围,并计算出转速改变量,由控制装置实行闭环控制。经大庆油田5口井试验表明,液面高度误差均在50 m内,实现了螺杆泵恒液面控制目的。     

Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

NUMERICAL STUDY ON QUASI- STEADY FLOW OF NONNEWTONIAN FLUID IN SUCK-ROD PUMP

This paper presents a numerical method for simulation of the flow and thecalculated results of the quasi-steady axisymmetrical flow field and pressure distribution on valveball with power-law model for Non-Newtonian fluid in suck-rod pump.We believe the methodcan provide a foundation for further research and improvement of the design of suck-rod pump.     

气泡－水相界面上传质过程的自相似分析解

应用自相似方法求解气泡－水相界上的传质问题，并获得了计算相界面上传质量的表达式。     

用参数泵分步结晶制取精萘的新工艺及放大

采用参数泵分步结晶工艺，开发了直立弹状流气泡管结晶器，由工业萘提纯制取精萘。实验室研究和放大试验的研究表明，产品纯度大于９９％，收率大于９２．５％。弹状气泡强化了传热和传质过程，流体的均布是放大过程的关键。     

大泵站超驼峰水位运行压缩空气断流系统的设计方法

阐述了压缩空气断流的原理，提出了压缩空气断流装置的一般构成和设计方法，首次应用气体喷射器作为压缩空气减压增量变换器，不但及时地增加了补气量，防止断流后流道压力的下降，而且大大减小了储气罐容积，使该项技术得以满足工程实际的要求，为同类泵站的技术改造     

机油泵转子的研究

本文研究了有关机油泵转子的齿形曲线、测绘及型腔设计等几个问题