大型离心复合球墨铸铁轧辊的生产

简述了我公司为舞阳铜厂试制４２００ｍｍ厚板轧机离心复合球墨铸铁轧辊的性能要求、内外层双重金属铸造工艺参数的选择及整个铸造生产工艺过程。     

Benzylation of thiophene using zinc and iron chloride modified montmorillinite clay

Montmorillinite clays, modified with either Zn(II) or Fe(III) chlorides have been used to catalyze the Friedel-Crafts alkylation of thiophene. High yields (ca. 80%) of 2- and 3-benzylthiophene mixtures were obtained using either catalyst in chlorobenzene or nitrobenzene solvent at 80°C. The ratio of 2–3-products was found to be controlled by their relative stability. Reactions were most rapid in nitrobenzene solution (<5 min) and resulted in formation of the 2-isomer as the only mono-substituted product. This is believed to be the first example in which an alkylation of thiophene has been limited to one regio-isomer.     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

Colour extension properties of individual pigments and effects on shades of foundations in cake form

The mechanism of colour change during the pigment dispersion process and during powder application to the skin surface was studied by examining the colour extension properties of Yellow. Red , and Black iron oxides in white powder bases. A new measure for the evaluation of the degree of colour extension was devised. This measure corresponded well with human visual sensation, and was found to be useful for comparing the rates of colour extension of pigments. The rate of colour extension of pigments was found to vary in the order: Yellow acicular Red granular Red Black. This result explains colour darkening and the change towards reddish tones during the pigment dispersion process, because Yellow extends fully in the early stage of the process but Red , especially in granular form, and Black continue to extend even in the later stage. Acicular Red iron oxide is more favourably employed than the granular form to attain sufficient colour extension of foundations with lower energy expenditure, and to decrease the discrepancy between the cake colour and the colour of applied powder.
Le développement des oxydes de fer et effet sur les nuances des fonds de teint compacts     

高炉煤气干法除尘技术发展现状及宝钢应用前景

在对高炉煤气干法除尘技术应用现状进行综合分析的基础上结合宝钢实际，提出宝钢应用此技术的相关建议。     

A review of the sponge iron process for the storage and transmission of remotely generated marine energy

The UK's vast marine energy resource is mostly located in remote areas west and north of Scotland, and transmission of this energy to the mainland will be required. This may be achieved by using this ‘stranded’ power to generate hydrogen electrolytically, which may in turn be stored or transported using sponge iron technology. This paper reviews the technology and research needed to bring such a process on stream. We propose utilising techniques that have been developed for the oxygen carriers used in chemical looping, and also those used in early processes for hydrogen generation in the chemical industry. We briefly outline the design requirements for an energy efficient sponge iron plant. It is shown that the iron sponge system presents better energy efficiencies than alternative forms of bulk storage such as liquid hydrogen, magnesium hydride slurry, some at least of the metal hydrides, or methylcyclohexane–toluene–hydrogen, provided that requirements can be met for particle durability and reactivity.     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

Equilibrium Studies of the System'(Fe,Co)O'–(Fe,Co)3O4 by Solid-State emf Measurements in the Temperature Range 970 to 1370 K

The equilibrium reaction 3'(Fe, Co)O'( ss ) +1/2O₂ ( g ) ⇄ (Fe, Co)₃O₄( ss ) was studied in the temperature range 970 to 1370 K for seven different total compositions of molar ratios 0.5 < Fe/(Fe + Co) ≤ 1.0. The equilibrium pressures of oxygen were determined by using galvanic cells incorporating calcia stabilized zirconia as solid electrolyte and the Fe/Co ratios in the solid-solution phases by wavelength dispersive spectrometry microprobe analyses. The activities of 'FeO' in the cobaltowüstite phase were then derived from the experimental results obtained.     

应用光度分析法测定铁和渣中的微量镓

用光度分析法测定镓，为适应多种试样的测定，补做了个别条件试验。用该方法测定了铁、渣、浸钒渣等六种不同类型试样中镓的含量，分析其精度精度符合要求。     

Lubricating behavior of iron rhenate and its relation to matching pairs

The iron rhenate was compounded by chemical method, which may be generated during wear process of Fe-Re alloys at elevated temperature. The friction coefficient of iron rhenate has been determined by a pin-on-disc device. The results show that iron rhenate plays role of lubricating at RT-600 °C. The lubricating behavior is related to the matching pairs. The hardness of the materials of matching pairs, compatibility of iron rhenate with materials of matching pairs and surface roughness of disc affect the lubricating behavior of iron rhenate mostly. The principle of matching pairs is proposed. Project supported by the National Natural Science Foundation of China Synopsis of the first author Xiong Dangsheng. associated professor, born in 1960. Current research fields include high-temperature self-lubricating alloys and tribological properties of material.