某抽水蓄能电站地下厂房动力特性研究

抽水蓄能电站具有高水头、大容量、快转速的特点导致振动问题特别突出,强烈的振动会导致机组以及厂房薄弱结构部位发生破坏,影响电站的安全稳定运行。结合某在建抽水蓄能电站,分析了可能与厂房结构发生共振的振源,研究了边界条件、材料特性对结构自振特性的影响,结合粘弹性人工边界条件,分析了在机组动荷载作用下厂房各部位的动力响应规律。     

Mechanical procedure for proof construction via closed terms in typed λ calculus

In this paper is presented an algorithm for constructing natural deduction proofs in the propositional intuitionistic and classical logics according to the analogy relating intuitionistic propositional formulas and natural deduction proofs, respectively, to types and terms of simple type theory. Proofs are constructed as closed terms in the simple typed calculus. The soundness and completeness of this method are proved.     

3DGIS环境下雨雪天气实时仿真

3D GIS最重要的特征之一就是虚拟现实表现,其本质是可视化技术与GIS数据库的整合,以满足各种应用如生态农业、灾害预测等方面的需求。以GIS数据库的环境数据和气象数据为基础,通过对雨雪的效果模拟,将GIS气象数据以实时的可视化形式逼真地表现出来。实验方法采用粒子系统,对单个点元赋予利用Photoshop制作的大面积纹理,这样采用的粒子数减少到普通粒子系统的十分之一,渲染速度为普通粒子系统的十倍以上,以较小的系统资源消耗达到了更加实时逼真的效果,对雪的动态堆积和雨水地面效果采用GPU加速3维渲染,原型系统同时能接受用户对实验环境如粒子纹理、雨雪量的设置。提出根据气象数据进行天气模拟的自适应策略,从而更加适应实际应用需要。     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

西南山区交通工程弃渣的工程特性评价及其分类

山区交通工程弃渣力学参数的准确测定,一直是弃渣场边坡稳定性评价面临的基础科学问题。在山区交通工程弃渣场运行特点和弃渣固体废弃物特征认知的基础上,探讨弃渣取样和试验代表性问题的物理根源,依托实际工程累计数据尝试提出简单实用的弃渣工程特性评价和分类方法。结果表明:①常规交通工程弃渣的密度、颗粒分析和强度试验,由于弃渣的粒径范围差异大、颗粒空间分布不均、弃渣来源复杂等固体废弃物特征造成取样和试验代表性难题; 用多阶段坡角测量和颗粒分析试验代替传统的弃渣边坡试验,解决了试验和取样代表性难题。②利用弃渣粗细比可将弃渣分为细粒弃渣、混合型弃渣和粗粒弃渣。③根据弃渣粗细比、天然休止角和整形坡率,将西南山区交通工程弃渣分为细粒弃渣、混合型弃渣和粗粒弃渣等3类。细粒弃渣,弃渣粗细比小于0.3,天然休止角小于31.5°,整形坡率为1.00:2.00; 混合型弃渣,弃渣粗细比为0.3～1.0,天然休止角为31.5°～39.5°,整形坡率为1.00:2.00～1.00:1.50; 粗粒弃渣,弃渣粗细比大于1.0,天然休止角大于39.5°,整形坡率为1.00:1.50。④用多阶段坡角测量、颗粒分析试验和无黏性土边坡稳定性系数计算公式代替传统的弃渣边坡试验和稳定性系数计算方法,方法简单,结果保守,可以作为弃渣边坡稳定性评价和安全控制技术的有益补充。     

关于输气管线内衬聚乙烯管可防止其腐蚀的商榷

本文参照德国一实例，即利用多种类型PE衬层，在一定温差及有气体扩散阻挡层和无气体扩散阻挡层的条件下，详细地叙述了高压酸性气体对其进行长期渗透作用的试验。结果显示：水蒸气和腐蚀性气体（如H2S）的渗透作用是不能忽视的，甚至当PE层为5mm时亦有一定渗透性；此外，在衬层底部尚产生了化学腐蚀作用，从而促使人们必须考虑须正确选择PE下边的防腐底层。     

天然气井下节流嘴前后压力温度分布的数值计算

针对天然气井安装井下节流装置以后很难测得节流嘴上游压力的情况,从空气动力学的原理出发,提出根据井口采集的数据,从节流嘴下游向上游计算其喉部和上游的压力温度综合值的数值计算方法。采用临界状态判别的新方法,即依据节流嘴出口处的马赫数的值,对节流嘴附近的流态进行判别,再分别计算节流嘴出口处,节流嘴喉部以及节流嘴上游的各参数。对宝1井进行了实例计算,计算结果表明:节流后压力温度骤降,经过激波面后压力温度急剧升高的变化情况。     

The Role of Chronic Inflammation in Various Diseases and Anti-inflammatory Therapies Containing Natural Products

Chronic inflammation represents a long-term reaction of the body's immune system to noxious stimuli. Such a sustained inflammatory response sometimes results in lasting damage to healthy tissues and organs. In fact, chronic inflammation is implicated in the development and progression of various diseases, including cardiovascular diseases, respiratory diseases, metabolic diseases, neurodegenerative diseases, and even cancers. Targeting nonresolving inflammation thus provides new opportunities for treating relevant diseases. In this review, we will go over several chronic inflammation-associated diseases first with emphasis on the role of inflammation in their pathogenesis. Then, we will summarize a number of natural products that exhibit therapeutic effects against those diseases by acting on different markers in the inflammatory response. We envision that natural products will remain a rich resource for the discovery of new drugs treating diseases associated with chronic inflammation.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Exploring the methods on improving CH4 delivery performance to surpass the Advanced Research Project Ageney-Energy target

CH_4 storage associated with adsorbed natural gas(ANG) technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E) targeted deliverable capacity of 315 cm~3·cm~(-3)(STP), hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target. Moreover, recent theoretical research reveals that the target is beyond the possibility that real materials can be designed. To get rid of the awkward situation, we make attempts on investigating the CH_4 delivery performance under other operation conditions. Methods of raising the discharge temperature(to infinite high) or elevating the storage pressure(to 25 MPa) have been proved to show limited effectiveness. In this work, it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy. By taking 280 Co RE(computation-ready, experimental) COFs(covalent organic frameworks) as ANG materials, when reduce the storage temperature to 190.6 K, the highest deliverable capacity can reach 392 cm~3·cm~(-3)(STP), and16.1% Co RE COFs can surpass the target. The target is also achievable when storage at 220 K. Structure performance relationships study shows strong correlation between deliverable capacity and void fraction. Hence, 120 hypothetical COFs are generated to ascertain the optimum void fraction. In addition,the performance of 2 D-COFs can be greatly enhanced by increasing the interlayer spacings, e.g. CH_4 deliverable capacity(storage at 190.6 K) of ATFG-COF can be improved from 239 to 411 cm~3·cm~(-3)(STP) when interlayer spacing is enlarged to 1.65 nm.