天然药物在现代医疗保健中的地位和作用

世界天然药物市场主要集中在美国、欧洲和亚洲三大区域,全球植物药市场的年销售额已达270亿美元。在过去的10年间,以植物制剂为主体的天然药物开始走俏西方。面对“回归自然”的世界潮流,采用现代科学技术,实现中药现代化和国际化,将为人类现代医疗保健做出重大贡献。     

Free convection heat transfer over a horizontal plate at low prandtl number

Boundary layer equations for free convection heat transfer along a semi-infinite horizontal plate are derived by giving more importance to the energy equation. The equations are obtained for low Prandtl number and two separate polynomials are used to approximate the temperature and velocity profiles in these regions. The rate of heat transfer is compared with the available analytical and numerical results based on conventional boundary layer equations.     

Analysis of epoxidized natural rubber. A comparative study of d.s.c., n.m.r., elemental analysis and direct titration methods

A comparative analysis of epoxidized natural rubber samples by ¹H and ¹³C n.m.r., titrimetric, elemental and d.s.c. techniques has been made. Whereas the titrimetric method is only applicable at low epoxy contents (< 15 mol%) both n.m.r. methods give reasonable precision over the compositional range of 20–75 mol%. Elemental analysis appears less reliable. D.s.c. analysis through measurement of T_g provides the highest precision of measurement but requires independent calibration by one or more of the primary methods. The epoxy content may also be related to the polymer density.     

国内外天然气化工产品发展方案探讨

阐述了国内外天然气化工产品的生产现状和发展趋势，从传统天然气化工产品中规划出乙酸乙烯、聚氯乙烯、甲醇等3个产品链方案，并分别对其产品方案及规模、产品市场、投资估算、主要技术经济指标等进行了分析，提出了当前我国发展天然气化工存在的问题和建议。     

商业化的锂离子电池石墨负极材料的研究进展

综述了锂离子电池石墨负极材料的研究进展,对MCMB、天然石墨与人造石墨、炭纤维为代表的石墨负极材料目前的研究和应用现状进行了详细的论述,并对石墨类炭负极的发展作了展望。     

Direct partial oxidation of methane over ZSM-5 catalyst: effects of additives

Previously, it was reported that the direct partial oxidation (DPO) of CH₄ with O₂ over HZSM-5 catalysts produces C₅₊ hydrocarbon liquids when the feed contains a propane or propene additive. This work studies additive effects on C₅₊ production in this system by processing a CH₄/C₃H₈ feed with subsequent removal of the C₃ additive and by processing natural gas feed. Results show C₅₊ production is maintained at constant yields for HZSM-5 catalysts having different zeolitic Al contents after removal of the C₃ additive. Mechanistic implications are discussed. Natural gas DPO consistently produced C₅₊ liquids due to the presence of C₂₊ components in the feed. While C₅₊ yields from natural gas DPO are higher than those observed for CH₄/C₃ feeds, increasing feed O₂ concentration, and thus conversion, deleteriously affected C₅₊ selectivity.     

Studies on crystal morphology and crystallization kinetics of polypropylene filled with CaCO3 of different size and size distribution

Changes in the crystal morphology, crystallinity, and the melting temperature of thermoplastics resulted in significant changes in the mechanical behavior of composites containing them. For this reason, the research of crystal morphology and crystallization kinetics in thermoplastic composites became an important requirement. The thermoplastic filled with the filler of different size gradation was a new method for improving processability of thermoplastic composites. We have previously reported that the melt viscosity of polypropylene (PP) composites, which were filled with 30 wt % CaCO₃ of effective size gradation, could be evidently declined. In this study, two sizes of CaCO₃, 325 meshes and 1500 meshes, were blended by different proportions and filled into PP matrix with 30 wt %. Crystal morphology and isothermal crystallization kinetics of a series of composites were characterized by differential scanning calorimeter (DSC) and polarizing microscope. The results showed that composites filled with CaCO₃ of effective size gradation leaded to a well‐crystalline order and a large crystal size, while their isothermal crystallization kinetics and crystallization rate constant (k) were declined, and their Avrami exponents (n) and crystallization half‐life (t_1/2) were increased compared with the composites filled with single size CaCO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2437–2444, 2006     

Ionic elastomer blends of zinc salts of maleated natural rubber and carboxylated nitrile rubber: Effect of grafted maleic anhydride

Zinc neutralized maleated natural rubbers (Zn‐MNR) were prepared by solution grafting and neutralization with zinc acetate in one‐step. It was later used for blending with carboxylated nitrile rubber (XNBR) in the composition of 50/50 parts by weight. The effect of grafted anhydride content (1.2, 1.6, 2.0, and 2.5% wt of NR) on the tensile properties of ionic rubber blends (Zn‐MNR/XNBR) was investigated. The tensile strength of the ionic blends was found to be greater than those of pure rubbers. The modulus, tensile, and tear strength of the blends dramatically increased with increasing levels of grafted anhydride. The ionic rubber blends also possessed superior physical properties compared to those of the corresponding nonionic rubber blends (MNR/XNBR). Dynamic mechanical thermal analysis and scanning electron microscopic studies were performed to verify the process of mixing. Fourier transform infrared spectroscopic studies were carried out to characterize the nature of specific intermolecular interactions between Zn‐MNR and XNBR chain segments. The results indicated that the ion‐ion (Zn⁺ ‐COO^?) interactions between Zn‐MNR and XNBR are formed at the interface, which provides the mean of compatibilization in the ionic rubber blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Mechanical properties and blend compatibility of natural rubber –chlorosulfonated polyethylene blends

Natural rubber (NR) was blended with chlorosulfonated polyethylene (CSM) with various formulation and blend ratios (NR/CSM: 80/20 –20/80, wt/wt). Rubber blends were prepared by using a two‐roll mill and vulcanized in a compression mold to obtain the 2 mm‐thick sheets. Tensile properties, tear resistance, thermal aging resistance, ozone resistance, and oil resistance were determined according to ASTM. Compatible NR/CSM blends are derived from certain blends containing 20–30% CSM without adding any compatibilizing agent. Tensile and tear strength of NR‐rich blends for certain formulations show positive deviation from the rule of mixture. Thermal aging resistance depends on formulation and blend ratio, while ozone and oil resistance of the blends increase with CSM content. Homogenizing agents used were Stuktol®60NS and Epoxyprene®25. Stuktol®60NS tends to decrease the mechanical properties of the blends and shows no significant effect on blend morphology. Addition of 5–10 phr of epoxidized natural rubber (ENR, Epoxyprene® 25) increases tensile strength, thermal aging resistance, and ozone resistance of the blends. It is found that ENR acts as a compatibilizer of the NR/CSM blends by decreasing both CSM particle size diameter and α transition temperature of CSM. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 127–140, 2006     

Natural fiber composites of high‐temperature thermoplastic polymers: Effects of coupling agents

Our earlier paper (Jana, S.C.; Prieto, A. J Appl Polym Sci 2002, 86, 2159) on the development of natural fiber composites of high‐performance thermoplastic polymers described a new methodology for the manufacturing of composite materials of a high‐temperature thermoplastic polymer, poly(phenylene ether) (PPE) and wood flour, a cellulosic natural filler. A thermosetting epoxy, used as a reactive solvent, reduced the processing temperature of PPE/epoxy blends to well below the decomposition temperature of natural fillers. In addition, the epoxy component, upon polymerization, formed coating layers around the filler particles to provide resistance against moisture diffusion and attacks by acids and alkali. This article describes the results of an investigation on two outstanding issues: (1) the influence of cellulosic wood particles and coupling agents on the speed of epoxy curing and reaction‐induced phase separation and (2) the effects of coupling agents on the morphology of crosslinked epoxy at the surfaces of natural fillers and mechanical properties of the composites. It was found that wood particles expedited epoxy curing in the composites; the extent of epoxy curing, however, was reduced in the presence of coupling agents. Also, the coupling agents promoted complete coverage of wood flour particles by polymerized epoxy, although the mechanical properties deteriorated over systems without coupling agents. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2168–2173, 2002