Aspects of moisture kinetics of coal bottom ash in concrete

The moisture kinetics aspects of composite granular material samples composed of natural sand and bottom ash (BA) from thermoelectric power stations and the use of this material in the production of durable concretes, in relation to water transport, are here discussed. The evaluations of the phenomenon of water absorption by capillarity and the loss of water through air drying until hygroscopic equilibrium, were carried out in accordance with classic procedures found in the literature and also newly developed procedures. The results showed that due to the high porosity of BA, the water absorption by capillarity along with the absorption velocity were higher in the compositions with greater BA content. The values for moisture equilibrium from air drying, absorption from capillarity and sorptivity obtained in the hygroscopic equilibrium tests, carried out on the same samples after absorption, were also higher in the samples with BA. These samples also requited a longer drying time.     

天然气管道事故严重度评价体系研究

为解决由于天然气管道管材的老化、腐蚀以及外力破坏引发事故的评价问题,以目标层、准则层和指标层3层结构体系,构建了天然气管道事故严重度评价体系,该体系从管道类型、事故类型、事故发生地点和事故已有损失4个方面来评价事故的严重程度,采用百分制权重加和法得到事故严重度指标值G,依据G值大小将事故分为3个等级,评估结果可以为管理层提供参考,为制定天然气管道事故抢修抢险方案起到导向作用.     

数控超声磨削陶瓷叶片型面刀位轨迹计算

介绍了陶瓷超声磨削加工现状,建立了平行直纹面数学模型.分析了用圆柱磨轮四轴数控超声磨削平行直纹面时原理误差,并提出减小误差的措施,计算出磨轮空间轨迹,并进行陶瓷叶片型面超声磨削加工工艺试验.试验结果表明,超声磨削加工陶瓷叶片型面是可行的,所完成的刀位计算可有效减小原理误差.     

Characterization of NOM and THM formation potential in eutrophic reservoir water

Resin adsorption technique with XAD-8 and XAD-4 was used to characterize the raw water from Erlong reservoir in Jilin province of China. The NOM chemical composition sequences of four organic fractions in the raw water,from high to low,are fulvic acid (FA) fraction,hydrophilic non-acid (HPINA) fraction,hydrophilic acid (HPIA) fraction,and humic acid (HA) fraction. Experimental results show that FA is the main precursor of THMFP among the four organic fractions. However,HA or hydrophobic acid exhibits the highest chlorination activity in forming THMs. It is also found that the value of FI/DOC or SUVA and the specific THMFP have better positive correlation. It is implied that certain source water has unique nature of NOM and DBPs.     

筏板基础在自贡地区高层建筑设计中的应用研究

文章结合工程设计经验对自贡地区的高层建筑在选用天然筏板基础的设计过程中,对高层建筑基础设计中涉及到的重要的地基沉降计算、结构设计和地下水等有关问题的处理进行了具体分析,对在一般高层建筑中采用天然筏板基础的实用性和可行性从设计和施工两个方面进行了相关的工程探讨。     

基于邻域风险最小化概率密度估计的自适应盲分离算法*

为实现由不同统计特性和概率分布平滑特性信号得到混合信号的盲分离,对基于支持向量机的邻域风险最小化概率密度估计算法进行研究,提出一种邻域函数的构造方法,将其与自然梯度批处理算法相结合,形成一种新的自适应盲分离算法;利用广义高斯模型分析了分离算法的精确度。通过仿真实验,验证了该算法能分离统计特性不同的混合信号,相比于基于经验风险最小化的方法,该方法在收敛速度和精度方面的性能有很大提高。     

再生丁基橡胶与非极性不饱和橡胶共混物的性能研究

对再生丁基橡胶(RIIR)与非极性不饱和橡胶共混物的性能进行了研究。结果表明,RIIR易以填料的形式加入到非极性不饱和橡胶中使用,当RIIR以填料的形式加入到NR、BR及SBR中时,不仅使它们的耐热氧老化性及耐屈挠龟裂性得到明显改善,而且使NR及BR的撕裂强度及扯断伸长率提高;RIIR作为生胶与BR及NR共混,可改善BR的耐热氧老化性,提高NR的撕裂强度;SBR与RIIR共混,均使拉伸强度及撕裂强度降低;非极性不饱和二烯类橡胶与RIIR共混后,均使耐磨性降低。     

引入源端信息的机器译文自动评价方法研究

机器译文自动评价是机器翻译中的一个重要任务。针对目前译文自动评价中完全忽略源语言句子信息,仅利用人工参考译文度量翻译质量的不足,该文提出了引入源语言句子信息的机器译文自动评价方法: 从机器译文与其源语言句子组成的二元组中提取描述翻译质量的质量向量,并将其与基于语境词向量的译文自动评价方法利用深度神经网络进行融合。在WMT-19译文自动评价任务数据集上的实验结果表明,该文所提出的方法能有效增强机器译文自动评价与人工评价的相关性。深入的实验分析进一步揭示了源语言句子信息在译文自动评价中发挥着重要作用。     

Effects of parameters on rotational fine blanking of helical gear简

The application of fine blanking to the manufacturing of helical gears directly from a strip has been restricted due to the traditional linear cutting stroke of the punch and die. In this work, rotational fine blanking which combined the linear and rotational motion of punch and counterpunch was applied for the forming of helical gears. A three-dimensional （3D） rigid-plastic finite element model was developed on the DEFORM-3D platform. By finite element simulation and analysis, the influences of key parameters on the punch load and cut surface were investigated. It is shown that： 1） with increasing the counterforce or helical angle, the punch load and the depth of die roll increase; 2） with increasing blank holder force, the punch load increases while the depth of die roll decreases; 3） V-ring indenter facilitates an improvement in the quality. The results of this research reveal the deformation mechanism of rotational fine blanking of helical gears, and provide valuable guidelines for further experimental studies.     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.