激光热源形成过程的定量描述

研究了热传导方程的通解，进而提出激光热源形成的微观机理和热源形成过程的三个理论计算式。对激光热效应的应用具有指导意义。     

一种辐射源距离的估算方法

提出利用测量设备与辐射源相对运动速度及测量设备所接收到的辐射功率的估算测量设备到辐射源距离的一种方法。对计算精度进行了分析，通过算例对理论分析进行了检验。     

鄂尔多斯盆地含油气系统

鄂尔多斯盆地含油气系统研究目前尚无成熟的划分方案和系统成果,本文主要依据油气赋存的层位并参考油气源将其划分为下古生界含气系统、上古生界含气系统及中生界含油气系统。各含油(气)系统平面分布范围主要受生油岩、储集岩分布和油气运移方向的控制;其中,下古生界含气系统、中生界含油气系统主要分布于盆地中部。上古生界含气系统主要分布于盆地北部。     

Waves generated by a source below a free surface in water of finite depth

The free-surface flow due to a submerged source in water of finite depth is considered. The fluid is assumed to be inviscid and incompressible. The problem is solved numerically by using a boundary integral equation formulation due to Hocking and Forbes [6]. The numerical results show that there is a train of waves on the free surface in accordance with the results of Mekias and Vanden-Broeck [5]. For small values of the Froude number, the amplitude of the waves is so small that the free surface is essentially flat in the far field. These waveless profiles agree with the calculations of Hocking and Forbes [6].     

RADIATION FIELD FROM A RECTANGULAR PLAQUE SOURCE FOR RADIATION PROCESSING

Evaluation of the Hubbell integral for an omnidirectional detector response to a rectangular plaque gamma emitting radiation source using a different numerical computation method on a personal computer was made. For a plaque consisting of several strip gamma emitters, exposure rates at different positions above the source were calculated using 'exact' evaluation and an approximate method. Optimization method is used to find source activity of each strip, so as to acquire desirable dose uniformity of the irradiated products. In uses of the Hubbell integral, by introducing appropriate programming, computation time can be saved.     

国外离子束系统（IBS）发展概况

综述了国外离子束刻蚀和沉积系统的研究进展，指出了离子束系统在半导体技术研究，开发和生产中的重要性。     

Ti,N,Mg对M2高速钢凝固组织和硬度的影响

为了改善Ｍ２高速钢共晶碳化物的分布，本文利用小凝固试样变质的方法研究了Ｔｉ，Ｎ和Ｍｇ对Ｍ２高速钢凝固组织和硬度的影响。试验结果表明，加入Ｔｉ或Ｔｉ－Ｎ后，共晶碳化物形态和分布有很大改善，而加入Ｔｉ－Ｎ后对凝固组织有轻微的细化作用，但只添加Ｔｉ不补碳时，钢的淬火硬度和回火硬度均下降；加入适量的Ｍｇ可以使片状的Ｍ２Ｃ型共晶碳化物转为鱼骨状的Ｍ６Ｃ型共晶碳化物，使其分布有所改善，Ｔｉ和Ｍｇ复合加入可以明     

利用独立分量分析法去除地震噪声

 独立分量分析（ICA）作为盲源分离（BSS）的一种新方法,是分解观测数据中独立信息的有力工具。以往的ICA算法一般假设噪声可以忽略不计，而实际的观测数据中又常常包含一些加性噪声。对于加性噪声的影响不能忽略的情况下，改进的ICA算法首先利用非零时间滞后协方差，应用两步特征值分解法(EVD)可成功地去除部分加性噪声的影响；再利用ICA算法就能更好地分离出原信号。本文通过对地震理论模型和实际资料的试验，说明改进的ICA算法能够有效地克服加性噪声对常规ICA算法的影响，能够分离出地震资料中的有效信号，从而实现利用独立分量分析压制地震资料噪声的目的。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry