STATIONARY AND NON-STATIONARY STATE SPACE MODELS

Abstract. The concepts of time invariance, stationarity, non-stationarity and immemorial time are considered for state space models (SSMs). Necessary and sufficient conditions for stationarity are given and connected with standard conditions. Expressions are given for the unconditional mean and covariance matrix of the state of a time-immemorial SSM. Application of the results is made to a variety of theoretical and empirical models and the initialization of the Kalman filter in the non-stationary case and for the ARIMA ( p, d, q ) model.     

降低过滤机滤饼水分和细粒煤脱水浅析

根据对选煤厂细粒煤样的实验室优化脱水试验、工业试验及分析结果 ,对真空系统、气水分离器和分配头实施了技术改造 ,细粒煤脱水系统的运行状况得到显著改善 :圆盘真空过滤机滤饼水分降到 2 0 %左右 ,脱饼率在 95 %以上 ,每年的直接经济效益可达 30 0多万元     

Filtration of liquid aerosols with a horizontal fibrous filter

The aim of this study was to determine the filtration efficiency and pressure drop in liquid aerosol capture mechanisms using a fibrous coalescent filter. The experimental set-up was designed to measure filtration efficiency and pressure drop through the filter. To avoid the gravimetric effect, the filter was placed horizontally. A series of experiments highlighted the importance of operating conditions such as filtration velocity and aerosol concentration. The results demonstrated the advantage of working at high velocities to minimise the resistance of the medium and to enhance the mass efficiency of the coalescent filter. In parallel, no effect of aerosol concentrations in the pressure drop increase was noted.     

片式抗电磁干扰滤波器Ni-Zn铁氧体材料与工艺研究

通过添加适量CuO和Bi2O3，将Ni-Zn铁氧体材料的烧结温度降至870—920℃，达到Ni-Zn铁氧体材料与Ag电极共烧匹配的目的。试制了片式抗电磁干扰滤波器，并对其插入损耗特性进行了计算机模拟，表明所研制的抗电磁干扰滤波器不仅适合高密度表面封装技术的要求，也可满足宽频域抗电磁干扰需要。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry     

Nondegradative microextrusion of resorbable polyesters for pharmaceutical and biomedical applications: The cases of poly‐lactic‐acid and poly‐caprolactone

In recent years biodegradable polymers, particularly polyesters such as the poly(lactic acid) (PLA) and polycaprolactone (PCL), have gained high interests for their applicability in the biomedical and pharmaceutical fields where they're used for manufacturing various different resorbable devices, from tissue engineering scaffolds to controlled drug release systems. Despite many positive characteristics, processability of these materials still remains a critical issue as they easily tend to degrade during manufacturing. In this article we aimed to assess microextrusion as a nondegradative process for manufacturing PLA and PCL. The results we experimentally obtained, that are hereby presented, set a new point in the on‐going debate on degradation during processing of resorbable polymers as they allow to affirm that microextrusion leaves unmodified molecular weight distributions without producing any evident reductions in mean molecular weight. Microextrusion thus represents a risk‐free high molecular weight polymer processing solution for obtaining nondegraded products within pharmaceutical and biomedical production lines, such as for scaffolds for tissue engineering applications or drug delivery. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

双隔膜压滤机在高炉煤气洗涤污泥脱水中的应用

针对南钢历年来在高炉煤气洗涤水污泥脱水处理中遇到的压滤机的问题，指出了单隔膜压滤机的缺陷，并在充分词研和实际应用的基础上改用厢式双隔膜高效板框压滤机，取得了较好的效果。     

中间包CaO质陶瓷过滤器滤除夹杂效果的研究

对鞍钢三炼钢厂中间包应用的CaO质陶瓷过滤器进行了实验研究，从装有陶瓷过滤器和未装陶瓷过滤器的挡墙侧水口上方及各自的连铸坯中取样，并用电解法和吸收光度法测定了夹杂物的总含量及分量。实验结果表明，陶瓷过滤器对于滤除钢液中的Al2O3、SiO2夹杂作用显著。     

ZPG系列盘式真空过滤机的研制与应用

详细介绍了ZPG系列盘式真空过滤机的主要特点、基本原理和主要技术参数。对盘式真空过滤机的过滤理论进行了系统的研究 ,以及为提高过滤系数和降低滤饼水分所采取的关键措施。与传统的真空过滤机进行了对比 ,表明ZPG系列盘式真空过滤机的滤饼水分可以降低 1 %～ 3 % ,过滤系数提高 3 0 %～5 0 % ,过滤每吨精矿的能耗可以降低 5 0 %左右 ,使得ZPG系列盘式真空过滤机在国内各大冶金矿山得到全面推广使用 ,创造了巨大的经济效益和社会效益。