粉尘薄膜爆轰

与普通爆轰不同，粉尘薄膜爆轰波前氧化剂与燃料处于分离状态．由于激波作用下壁面燃料的注入才于壁面附近形成燃烧的粉尘云，燃烧释放的热使激波自持形成粉尘薄膜爆轰。本文在长2、8m，横截面20mm×20mm的方型水平激波管中对此类爆轰进行了实验研究．并根据作者建立的模型对其二维结构进行了数值模拟。     

热分层流动计算中若干差分格式的比较

本文应用常规的守恒方程及湍流模型，对二维池内热分层流动建立了数学模型，并在Ｐａｔａｎｋａｒ的压力校正法基础上对该数学模型进行了数值计算，计算中的差分格式为乘方格式、一阶迎风、二阶迎风和ＱＵＩＣＫ。通过与实验的比较分析，建议计算应采用ＱＵＩＣＫ格式，并在进行风格独立性试验的基础上使用加密网络。     

电磁胀形磁场力的有限元分析

研究电磁胀形过程中工件受到的磁压力沿长度方向和厚度方向的分布是工件变形分析的基础。采用有限元方法对电磁胀形过程中作用工件上的磁场力进行了数值模拟。在磁场特性理论分析的基础上确立了模型的边界条件，得到了磁场力沿工件长度和厚度方向的分布规律。模拟结果与测量值基本吻和。     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

Automatic generation of IDEF0 models

This paper looks into a new area for knowledge-based system application, that of manufacturing modelling. Manual generation of IDEF0 models of manufacturing systems is time-consuming and inconsistent. However, the process can be automated to improve timeliness and consistency. In this paper, a knowledge-based manufacturing modelling system for the automatic generation of IDEF0 models is proposed. The system will not only greatly reduce the IDEF0 modelling time but will also eliminate the inconsistency problem of conventional IDEF0 modelling systems. The paper explains the knowledge-based approach and identifies the kinds of domain knowledge that are required for the construction of the knowledge-based manufacturing modelling system.     

Best L1 Piecewise Monotonic Data Modelling

Let us consider n data measurements of a univariate process that have been altered by random errors. We assume that an underlying model function has a substantially smaller number of turning points than the observed ones. We propose algorithms that make least the sum of the moduli of the errors by requiring k monotonic sections, alternately increasing and decreasing, in the sequence of the smoothed values. The main difficulty in this calculation is that the optimal positions of the joins of the monotonic sections have to be found automatically among so many combinations that it is impossible to test each one separately. Moreover, the calculation seems to be very intractable to general optimization techniques because O(n^k) local minima can occur. It is shown that dynamic programming can be used for separating the data into optimal disjoint sections of adjacent data, where each section requires a single L₁ monotonic calculation. This procedure is highly efficient, requiring at most O(kn²) computer operations and O(n) best L₁ monotonic calculations to subranges of data for a global minimum.     

Issues in nonlinear stochastic grey box identification

Grey box identification refers to the practice of identifying dynamical systems in model structures exploiting partial prior information. This contribution reviews a method for stochastic grey box identification and surveys experiences and lessons of applying it to a number of industrial processes. Issues to be addressed include advantages and costs of introducing stochastics into the model, the question of what contribution must be expected from the model designer as opposed to what can be formalized in computer algorithms, and an outlook on future plans to resolve present shortcomings.     

测井声波波形与声源的特性有关

根据推导出的圆管状压电换能器在各种激励电压信号作用下的声源函数和谱函数以及声波测井正演问题研究出的石油井孔中任意一点上的声波公式,用计算机技术模拟出了相应的测井记录声波全波列,并将它们输入到声波全波列测井处理程序中进行处理。正演模拟结果和处理结果表明,测井记录的声波全波列不但与所测地层的性质有关,而且与声源的特性有关,声源特性对测井记录的声波全波列的质量有一定的影响。     

灰铸铁石墨形态的研究

文本研究了化学成份与冷却速度及孕育处理对灰铸铁石、墨形态的影响．并对形成的地B、C、D、E、F等六种衣铸铁石墨形态的形成条件作了讨论．