Theoretical analysis of heat transfer in laminar pulsating flow

Pulsation effect on heat transfer in laminar incompressible flow, which led to contradictory results in previous studies, is theoretically investigated in this work starting from basic principles in an attempt to eliminate existing confusion at various levels. First, the analytical solution of the fully developed thermal and hydraulic profiles under constant wall heat flux is obtained. It eliminates the confusion resulting from a previously published erroneous solution. The physical implications of the solution are discussed. Also, a new time average heat transfer coefficient for pulsating flow is carefully defined such as to produce results that are both useful from the engineering point of view, and compliant with the energy balance. This rationally derived average is compared with intuitive averages used in the literature. New results are numerically obtained for the thermally developing region with a fully developed velocity profile. Different types of thermal boundary conditions are considered, including the effect of wall thermal inertia. The effects of Reynold and Prandtl numbers, as well as pulsation amplitude and frequency on heat transfer are investigated. The mechanism by which pulsation affects the developing region, by creating damped oscillations along the tube length of the time average Nusselt number, is explained.     

适用于微机的核蒸汽发生器热工水力分析程序—SGTH—2

本程序用于计算核蒸汽发生器的热工水力分布参数以及一次侧流动压降、二次侧自然循环和稳态特性,将本程序的计算结果与法国对同型号蒸汽发生器的实测数据以及用 ATHOS 程序的相应计算结果进行比较,表明主要热工水力参数能令人满意地吻合。     

激光熔覆Ni基SiC合金涂层组织与性能的研究

利用5kWCO2连续波激光器在16Mn钢基材表面对含20%(体积比)SiC陶瓷粉末的镍基自熔性合金粉末进行激光熔覆得到Ni基SiC合金涂层(NiSiC)。研究了合金涂层的组织形貌及相结构,并用单纯的镍基合金涂层(Ni60)进行了显微硬度及滑动磨损性能的对比试验。结果表明,NiSiC合金涂层由γ枝晶及其间的共晶组织组成,主要组成相为γ-Ni,γ-(Ni,Fe)固溶体和(Cr,Fe)7C3,Cr23C6及(Cr,Si)3Ni3Si等化合物。添加SiC的镍基合金涂层NiSiC比单纯的镍基合金涂层Ni60具有较高的硬度和耐磨性。     

栲胶法变换气脱硫工艺

介绍了栲胶法脱硫的原理，工艺流程及规整填料在脱硫塔中的应用。     

2Mbit/s高速信令链路在移动通信七号信令网中的应用

通过对2Mbit/s高速信令链路原理、特点的介绍，阐明了该技术在现阶段使用的实际意义，并给出了2Mbit/s高速信令链路在移动通信七号信令网中的应用。     

水溶性丙烯酸涂料的环氧树脂改性

本实验论述了水溶性丙烯酸钢铁底漆涂料制备、性能以及用环氧树脂对其进行改性。原水溶性丙烯酸钢铁底漆涂料在进行耐盐雾测定试验时仅为 72h ,未通过国家规定标准。本实验的目的在于 ,以丙烯酸树脂为主要成膜物质 ,加入其他的辅助成膜物质 ,如环氧树脂来改善其抗盐雾、抗腐蚀、耐候等性能。结果表明 ,一定温度下在水溶性丙烯酸钢铁底漆涂料中加入 1/ 7的环氧树脂后 ,经测定其耐盐雾性可达 10 6h ,达到了国家的规定标准     

高雷诺数下双圆柱绕流的数值模拟

本文使用表面涡法研究高雷诺数下不同排列方式双圆柱绕流的流动状态，计算了双圆柱在并列、串列及级列的情况下的各种流动结构，涡街的变化及作用在圆柱上的受力情况。本文结果清楚地描述了双圆柱绕流复杂的流动状况，计算结果与实验显示的流动状况十分相似，斯特罗哈数和阻力系数与实验结果符合得很好。     

PVD涂层工艺在M3滚刀上的应用

对M3滚刀进行了物理气相沉积 (PVD)工艺试验。经高温耐磨试验和切削试验证明 ,M3滚刀经TiN涂层后 ,其耐磨性和使用寿命显著提高。     

共轭梯度法在三维复杂流动数值分析中的应用

将多块网格技术运用于三维T型管复杂流场的网格生成，利用不完全乔列斯基预处理共轭梯度，双共轭梯度方法求解N－S方程的离散方程。计算表明上述方法有良好的收敛特性，适合于诸如T型管等复杂流动的分析。     

人力资源投资评价应解决的两个重要问题

阐述了企业人力资源投资财务评价应解决的两个重要问题：评价对象的分类和项目的财务现金流量的内容。