Detection of water ingress in composite sandwich structures: a magnetic resonance approach

Water ingress inside honeycomb sandwich panels during service has been linked to in-flight failure in some aircraft. There is an ongoing effort to develop nondestructive testing methods to detect the presence of water within the panels. Magnetic resonance (MR) represents an attractive approach in that it is sensitive to moisture. Using a unilateral MR sensor, testing can be applied directly to the surface of the panel. The viability of MR is demonstrated through laboratory imaging of both water within sandwich panels, as well as the adhesive itself. The detection of water using a one-sided handheld MR sensor is presented. It is shown that simple detection, as well as spatial localization of water within sandwich panels is possible.     

TANDEM双丝焊在造船拼板焊接中的应用

介绍了TANDEM双丝焊在造船拼板焊接中的原理、应用、工艺结果表明,TANDEM焊接工艺对组对时预留间隙、母材种类的适应性较强,热输入低,变形小,减少焊后处理成本,焊接效率高、焊接速度快.TANDEM焊接工艺是船厂拼板焊接比较理想的焊接工艺.     

酚醛泡沫及其夹芯板材开发进展

综述了酚醛泡沫及其夹芯板材的国内外进展,包括应用开发和市场现状,参考文献9篇。同时简单介绍了酚醛泡沫的生产工艺及其市场需求和效益。     

Win7控制面板三大功能应用技巧

每个市场客户的需求是不一样的,使用情况也有差异.Win7的推出也是褒贬不一.Win7系统是微软开发的操作系统,在桌面、主题、功能、安全上相对于上一代系统有着很大的改进.以功能的强大及全面、存储空间小、操作系统简单和新增功能的人性化而受到用户的喜爱,且智能性上来说,Win7比XP要好很多.但是通过调查研究地发现,很多的用户对于Win7系统的使用仅仅停留在了表面阶段,对于系统中很多新的、提高便捷性的功能了解不足.因此,笔者通过这篇文章来研究和探讨win7系统的控制面板中三大功能的应用技巧,让win7系统能更好的为用户服务.     

酚醛泡沫夹芯板甲醛释放与检测初步探讨

对酚醛泡沫夹芯板中甲醛的来源、释放的影响因素以及控制方法进行了初步探讨。介绍了国内外关于人造板甲醛释放量的相关规定。根据材料的特点及甲醛释放情况,采用40L干燥器法进行了甲醛检测,并进行了讨论。结果表明:与仲裁检测法———1m3气候箱法相比较,该检测方法的结果偏差很小,当取置信水平为0.95时,检测结果的变异系数均小于10%,重现性好。     

基于图像信息的彩色PDP动态子场编码优化方法

为改善累积发光驱动方法显示静态图像时的灰度级轮廓,提出了一种基于有效灰度级均匀分割采样的动态子场编码(DSC)算法。首先对输入图像中的孤立灰度区间进行灰度采样,然后对剩余灰度级均匀分割,选择各灰度区间概率密度较大的灰度级作为采样灰度级,相邻采样灰度级之差即为子场编码权值,从而使采样灰度级均匀分布在输入图像的有效灰度区间,并使采样灰度级和子场编码权值随图像变化。仿真和实验结果表明,该算法不仅能真实再现大面积的背景,而且使图像细节信息尽可能保留,显著减小了静态图像的轮廓。     

彩钢岩棉夹芯屋面板、墙面板节点性能研究

为了掌握彩钢岩棉夹芯屋面板、墙面板与檩条的螺钉连接节点抗拉破坏机理,采用理论分析、试验验证及有限元模拟相结合的方法研究了不同钢板厚度及芯材厚度时节点破坏情况.分析结果表明:屋面板节点连接破坏是由于钢板局部屈曲引起的,墙面板则是钢板被冲剪破坏造成的,同时,结合对有限元模拟结果的回归,提出了节点承载力设计公式,可为以后节点设计提供参考.增加岩棉刚度及其与侧向钢板的粘结,或增加钢板厚度对提高屋面板节点极限承载力起着重要作用.     

Power management unit chip design for automobile active-matrix organic light-emitting diode display module

A power management unit (PMU) chip supplying dual panel supply voltage, which has a low electro-magnetic interference (EMI) characteristic and is favorable for miniaturization, is designed. A two-phase charge pump circuit using external pumping capacitor increases its pumping current and works out the charge-loss problem by using bulk-potential biasing circuit. A low-power start-up circuit is also proposed to reduce the power consumption of the band-gap reference voltage generator. And the ring oscillator used in the ELVSS power circuit is designed with logic devices by supplying the logic power supply to reduce the layout area. The PMU chip is designed with MagnaChip’s 0.25 μm high-voltage process. The driving currents of ELVDD and ELVSS are more than 50 mA when a SPICE simulation is done.     

造型设计运用于电子通信设备

分析讨论了造型设计的基本概念、美学法则在电子通信设备的具体运用以及电子通信设备具体的造型设计方法,举出了造型设计实例。     

Ultralight X-type lattice sandwich structure (I): Concept,fabrication and experimental characterization

A new type of ultra-lightweight metallic lattice structure (named as the X-type structure) is reported. This periodic structure was formed by two groups of staggered struts in the traditional pyramid structure, and fabricated by folding expanded metal sheet along rows of offset nodes and then brazing the folded structure (as the core) with top and bottom facesheets to form sandwich panels. The out-of-plane compressive and shear properties of the X-type lattice sandwich structure were investigated experimentally and compared to those of the sandwich having a pyramidal truss core. It is found that the formation of the 2-dimensional staggered nodes can effectively make the X-type structure more resistant to inelastic and plastic buckling under both compression and shear loading than the pyramidal lattice truss. Obtained results show that the compressive and shear peak strengths of the X-type lattice structure are about 30% higher than those of the pyramidal lattice truss having the same relative density. Supported by the National Basic Research Program of China (“973” Project) (Grant No. 2006CB601202), the National Natural Science Foundation of China (Grant Nos. 10632060,10825210), the National “111” Project of China (Grant No. B06024) and the National High-Tech Research and Development Program of China (“863” Project) (Grant No. 2006AA03Z519)