构造性神经网络在测井岩性识别中的应用

测井岩性识别是石油勘探中十分重要的基础工作,准确的岩性识别结果可以为勘探和开发提供可靠的依据。人工神经网络方法可对复杂的高维数据进行非线性映射,在模式识别领域得到越来越广泛的应用。针对传统的BP神经网络算法存在收敛速度慢、隐层数以及隐层节点数难以确定等缺点,研究了一种构造性神经网络学习算法---级联算法（Cascade Correlation Algorithm,简称CC算法）及其在石油工程中的应用。采用该算法对甘肃镇原-泾川地区进行岩性识别研究,通过与BP神经网络的识别结果进行比较,体现出构造性神经网络的优越性。     

水电工程坝基岩体研究现状与发展的思考

以国内部分重点水电工程为例，对我国水电工程建设中坝基岩体质量分类、主要岩石力学参数的选取、大坝建基面的确定及弱风化岩体利用情况进行总结与分析；指出简化的坝基岩体多因子分类、岩体力学参数的提取与岩体质量分类相配套、按等值线提取岩体物理力学参数并动态确定大坝建基面的方法，应是水电工程坝基工程岩体研究的发展趋势。     

Accumulation of amplified target DNAs using thiol/biotin labeling, S1 nuclease, and ferrocene-streptavidin-magnetic system and a direct detection of specific DNA signals with screen printed gold electrode

Combinations of PCR-based amplification platform using 5′ thiolated and biotinylated specific primers, S1 nuclease-PCR products treatment, ferrocene-streptavidin (Fc-Stv)-magnetic binding for DNA accumulation, and screen printed gold electrode for the DNA allocation, were applied to Hoechst 33258-induced DNA aggregation and signals induction system for direct signals detection and DNA quantification in food samples. Thiolated and biotinylated at each 5′ terminus enabled DNA purification through S1 nuclease treatment for primers and non-specific DNA elimination and enabled DNA trapping with a ferrocene-streptavidin-magnetic system. This facilitated the accumulation of target DNAs at higher concentration, resulting in enhanced signals. After allocation of DNA on the surface of gold electrode via thiol binding, intensity of DNA signals through these treatments could be measured directly after being induced by Hoechst 33258. Wider amplitude changes in anodic current peaks between negative and positive samples (increasing from 3.70 to 10.10 μA) compared with those applied with no treatment combinations (decreasing from 3.92 to 1.23 μA) were observed. This enhancement of the signals allowed a greater efficiency of DNA quantification. When this combination was used for GMOs content estimation in reference samples, results revealed an improved accuracy from 66% to 96%. The combined biosensor system, although more costly than the standard Hoechst 33258/carbon electrode system, provided an alternative choice for DNA quantification, offering labor-free immobilization of probe onto electrode surface, easy test administration, and efficient semi-quantitative test without expensive instruments.     

基于Luv色度坐标图像分割方法的孔洞参数计算

针对成像测井解释中孔洞参数定量计算的准点，提出用基于Luv色度坐标进行图像分割的方法来定量计算孔洞的面积、面孔率等相关参数。采用该方法得到的孔洞结果目标区域完整，可以方便地计算出孔洞面积和面孔率等参数。     

液氮制冷低气压试验箱的仿真设计

在采用液氮制冷的低气压试验箱的设计中,用常规工程设计方法计算的降温过程冷负荷过大,从而导致真空系统设计容量过大。本文采用分布参数模型对试验箱低气压条件下降温过程的冷负荷进行了精确仿真模拟,以此作为真空系统容量设计的基础,减小了设计规模,取得了良好的效果。     

离心式井下增压装置的系统设计

针对目前国内外超高压射流钻井技术采用柱塞式增压器普遍存在寿命短、工作可靠性差的问题,提出离心式井下增压装置的结构设计方案。这种增压装置由动力单元(涡轮动力机)、固液分离单元、增压单元(离心泵)和流道短节单元组成,通过钻井液驱动涡轮动力机旋转,并带动固液分离装置和离心泵高速旋转,使部分钻井液增压,达到提高射流压力和速度的目的。现场试验证明,这种离心式井下增压装置可使钻井液在井底的压力达到30MPa。     

Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

电子认证与授权管理标准体系研究

以国际上在标识、鉴别与授权标准方面已有的工作为基础，提出了我国电子认证与授权管理标准体系框架。     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

局部散射源参数估计的非线性算子方法

本文利用单次快摄数据的两个非线性算子估计局部散射源中心波达方向和角扩展,与多维参数搜索和其他低复杂性的局部散射源参数估计算法不同,非线性算子方法给出了单次快摄的局部散射源参数估计的闭式解,无需进行多维搜索和子空间分解。