New correlation for predicting the viscosity of heavy petroleum fractions

A new, simple and reliable empirical correlation for predicting the viscosities of heavy petroleum fractions is proposed, applicable to fractions with mid-boiling points from 80 to 550°C over a wide range of viscosities (0.4 to 260 mm² s⁻¹) and measurement temperatures (40 to 200°C). This correlation showed better accuracy in the prediction of heavy petroleum fraction viscosities than that of the most accurate and much more complicated predictive methods in the literature, since it gave an overall average absolute deviation of 6.5% when tested on 296 data for medium and heavy petroleum fractions.     

采用加压-真空两段热缩聚法制备中间相沥青炭纤维的原料

以深度裂解石油渣油为原料，采用两段热缩聚法可制得软化点为268℃，可编性良好的中间相沥青。本文详细考察了温度，时间对中间相沥青软化点，可编性，中间相沥青形态及碳化收率的影响，并初步探讨了两段热缩聚反应的机理。研究结果表明反应温度，时间对中间相沥青的结构和性能影响较大，选择适宜石油渣油，采用加压－真空两段热缩聚法，调整反应条件，可制得可纺性良好的中间相沥青。     

煤液化油实沸点蒸馏的模拟实验

采用TD200简易蒸馏装置对石油醚和液体石蜡进行了实沸点蒸馏，得到实沸点蒸馏数据，并绘制了实沸点蒸馏曲线和各馏分质量百分数与温度关系曲线，得出主要馏分所在的沸程分别为石油醚64．5℃～68℃，液体石蜡412℃～420℃；同时计算出了二者的平均沸点为65.73℃和404．36℃．这些曲线及数据不仅对石油醚和液体石蜡的组成和使用性能有参考价值，而且这种分析方法为煤液化油的实沸点蒸馏奠定了基础。     

用于燃油节能环保的有机稀土活性复合物的制备及应用

由有机稀土配体化合物、表面活性剂、助表面活性剂、稳定剂、溶剂等原料制备出有机稀土活性复合物。通过柴油机台架实验发现,该种复合物的加入不仅对柴油机节能、抗磨损及保护发动机起到积极的作用,同时能有效降低尾气中有害物质的排放。     

Reduction of NO2 stored in a commercial lean NO x trap at low temperatures

Isothermal storage of NO₂ and subsequent reduction with different reducing agents (H₂, CO or H₂ + CO) in a lean NO _x trap catalyst was tested by Temperature Programmed Desorption (TPD) and Temperature Programmed Reduction (TPR) experiments at temperatures representative of automotive “cold-start” conditions (<200 °C) using a commercial NO _x trap catalyst. Results from the TPR experiments revealed that no reduction of stored NO₂ to N₂ was observed at 100–180 °C, and at 200 °C 10% reduction only of NO₂ to N₂ was measured. A special affinity of H₂ to form NH₃ was observed during the reduction of stored NO₂. The formation of NH₃ increases with increasing amount of stored NO₂ and decreases with increasing storage temperature. Direct relation exists between the amount of adsorbed and/or stored NO₂ and the formation of H₂O and NH₃.     

CO2 effect on activity and stability of NOx storage reduction catalysts

A catalyst for NO_x storage/reduction was prepared to improve the activity of Ba–Pt/γ-Al₂O₃ by replacing Ba with a mixture of Ba and Mg. The catalyst was prepared by impregnating Pt and then co-impregnating Ba and Mg (Mg:Ba molar ratio = 1) on commercial γ-Al₂O₃. The tests have been carried out in the presence of CO₂ at temperatures between 200 and 400 °C in order to understand the role of both the feed and various alkaline-earth metals. The storage capacity of the two catalysts was different like the mechanism in the reduction process.     

喷雾快冷制备SbSn金属间化合物用于石油脱硫

使用自制管式炉,采用喷雾快冷工艺制备得到SbSn金属间化合物,将其作为功能材料进行石油脱硫实验。考察了材料制备温度、处理时间、石油乳化液配制条件等因素对脱硫效果的影响。结果表明,SbSn金属间化合物材料制备温度为950℃,脱硫的过程以16 h为宜;使用SbSn金属间化合物材料,在常温常压条件下对油包水型石油乳化液有明显的脱硫效果,该石油乳化液较佳的配比为:表面活性剂的质量分数0.25%,水的质量分数40%。在以上适宜的条件下,对石油的脱硫率最大可达到30.4%。     

系统控制单元数据存储更新算法探讨

系统控制单元的有限存储空间被系统运行数据写满时,新产生的数据就需替换旧数据完成更新。通过采用逐条替换法、分块替换法、间歇删除法和抢断删除法,比较替换过程中最少存储数据的数量和实时性的滞后时间,找出一种最优的数据更新方法。试验结果表明,抢断删除替换算法更能快速有效实时完成数据的更新。     

中温相变蓄热材料研究进展

对中温相变蓄热材料(PCM)的定义范畴、应用领域、国内外发展现状进行了评述。中温PCM主要针对90~550℃的热动力环境,在太阳能热发电、有机朗肯循环、移动蓄热技术、分布式能源系统等方面有广阔的应用前景。指出进一步的研究方向是拓展中温PCM的应用场合,规范长期稳定性的表征与测试手段,重视与换热器开发以及应用领域的整合,并提出硝酸盐熔融盐混和物将是今后一段时期内中温PCM研发和培育的重点产品对象。