计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。     

Electrochemical impedance spectroscopy of a free-standing oxide film

The corrosion of low carbon steel in natural sea-water is characterized by the formation and growth of compact and thick layers composed of oxides, insoluble salts and organic materials. These layers are the result of corrosion processes induced by local environmental conditions, water oxygen supply; ionic species; bacteria and organic matter. The exchange of various species (ions, molecules, gas) between sea-water and the rust layers or the metal depends both on the kinetics of the Faradaic reactions of the entities with either the oxides or the metal, as well as on their transport properties through the different strata of the rust layers. In this work, an impedance study was carried out using the 4-electrodes cell arrangement with corrosion products picked up on steel sheet piling immersed for 25 years and analyzed as free standing membranes. This new approach is a good way to reach the specific transport and transfer properties of the oxide without being blurred by the metal influence. The physical model developed in this work was based on a transmission line, and accurately described the experimental diagrams. The electronic resistivity of the oxide layer, its porosity, the mean pore size and the reaction kinetics parameters could be determined from the fittings.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

高职教育网上成绩考核系统的总体设计

本文对网上成绩考核系统进行了总体设计.其中,设计了校园网的网络结构模型、网上成绩考核系统的模块结构及其数据库和数据表.     

一种光时分制交换时隙分配计算算法

介绍了一种专为时分复用系统设计的时院分配计算算法。这种算法中主要用到的技术是从一个话务矩阵的各行选出一个区别代表的系统方法。对于任何话务矩阵，这种算法的分配效率都能达到１００％，所产生的模式矩阵个数最多为ｎ２－２ｎ＋２个（对于ｎ×ｎ矩阵）。     

二维地震过障碍观测系统模式及其参数设计

在二维地震勘探中,为了避免因地表障碍物使地震反射剖面出现间断现象,需要改变观测系统设计,跨越障碍物(江河、城镇等),以保证反射同相轴能连续追踪对比。在以往地震勘探中,有时因过障碍观测系统设计不合理,不但增加勘探费用,而且影响采集质量。因此只有科学合理地设计过障碍观测系统模式和参数,才能保证地震测线顺利通过障碍物,得到较好的障碍物下方的地震资料并降低勘探成本。为此本文在调查和研究大量野外实际的过障碍观测系统的基础上,总结归纳成三大类过障碍观测系统模式,并分析其特点和应用范围。采用图解法,推导出主要模式的跨越宽度、最小炮检距及最大炮检距等参数公式。采用这套过障碍观测模式不仅可以得到和障碍区两侧等质量的地震资料,而且可以有效地降低勘探成本。     

大庆油田助剂厂3500kt／a常减压减压塔的管道设计

简述了大庆油田助剂厂3500kt/a常减压减压塔的管道布置设计特点,体现出塔类设备的管道设计原则,并结合管道设计的经济性、安全性展开论述。     

Applications of the 4×4 determinant method and the POLYGON ENGINE

In the first half of the paper, various types of processing pertaining to a polygon, using the 4×4 determinant theories are explained along with a new containment test algorithm of a point in a polygon. In the latter half of the paper, a general-purpose geometric processor, the POLYGON ENGINE, is presented which can deal with various types of interference problems, such as Boolean operations in solid modelling, hidden line and surface eliminations, ray tracing and so on. It is, a successor of the TRIANGLE PROCESSOR and is also based upon the 4×4 determinant theories [4–6]. While the TRIANGLE PROCESSOR processes a triangulated polygon on a triangle-by-triangle basis, the POLYGON ENGINE can treat a polygon without triangulation. The latter is expected to be more functional, more efficient and easier to use.     

电荷耦合图像传感器在细线直径测控系统中的应用

文中给出了一个以氟化氪固体激光器做光源，以电荷耦合图像传感器为光屏，应用夫朗禾费衍射原理，实现对细丝直径在线检测自动控制。该方案对相关企业质量控制的自动化是有意义的。