行为优化提升软件配置管理

软件配置管理包括对代码、文档、数据等的管理,其优劣受限于项目成员的实际操作。开发人员对于工作区如何使用;成员之间的代码是不是可以及时更新与同步;怎样使用分支,如何进行变更合并,才能减少物理空间浪费和事件延迟。这些问题在实际的项目开发中往往被忽视,亦或团队并没有对成员行为作细节的规范,因而许多软件项目出现了工期推迟或代码质量不高等问题。为此提出了一系列管理措施,通过优化软件配置管理规范项目各成员的行为,以保证高效的软件配置管理的实施。     

黄河干流白银市水川段水面线计算方法对比分析

为克服能量方程逐段试算方法在河道水面线计算上存在的不足与局限,本文以黄河干流白银市水川段为例,采用二维水动力数值计算模型,对4种洪水频率工况下黄河干流白银市段的水面线高程进行计算,并将二维数值计算结果与能量方程计算结果进行复核和评价。经计算可知两种计算方法在计算结果上存在偏差,能量方程在河道水面线计算上是一种近似成果,而二维数值计算能够更加真实反映河道的实际情况,因此在水面线计算时推荐二维数值计算方法。     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

矿用区域温度监测系统研制

针对现有的火灾探测器仅能对已发生的火灾进行探测,而在火灾发生前、环境温度较低时,却无法发出报警信号的问题,设计了一种可应用于非煤矿山的基于测温电缆的区域温度监测系统。该系统采用线状温度传感器连续监测探测区域的最高温度,在火灾未发生时即可发出预警信号,从而避免事故发生或引起火灾。试验结果验证了该系统的可行性。     

Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

Transport properties of critical dilute solutions

On the basis of the isomorphism of critical phenomena, the behavior of transport properties of binary mixtures in the vicinity of the vapor-liquid critical line is considered. In particular, the renormalization of the singularity of the thermal conductivity in dilute critical solutions has been analyzed in detail. It is shown that the behavior of the thermal conductivity is determined by the critical background, i.e., the fluctuation-induced regular part, which diverges at the critical point of a solvent.     

浅析高速线材轧制的稳定性

在高速线材轧制过程中，轧件易发出偏斜和扭转，如果能够实现自动找正，则可保证顺利轧制。通过分析高速线材生产中的椭圆——圆孔型系统的受力条件，证明椭圆——双心圆孔型系统有更好的稳定性和找正作用，为高速线材孔型设计提供了稳定性依据。     

GIL机械故障诊断与预警技术研究

为了有效诊断气体绝缘金属封闭输电线路(GIL)的机械故障,搭建了110 kV GIL试验平台并设计了3种典型机械故障,通过互补集合经验模态分解(CEEMD)模糊熵值与鲸鱼优化极限学习机(WOA-ELM)模型联合方法对GIL机械故障模式进行识别与诊断。首先,利用CEEMD方法对振动信号进行分解,引入正负白噪声组对信号进行处理,得到含有故障信息的模态分量(IMF)。其次,利用模糊熵计算模态分量特征值,得到能表征故障特征的模糊熵值。最后,结合WOA-ELM模型对特征向量集进行模式识别,根据聚类结果与自适应阈值对GIL设备机械故障进行诊断和预警。结果表明,利用CEEMD与模糊熵对GIL振动信号特征进行分析,可以有效避免模态混叠和冗余噪声分量的干扰,得到能够表征故障特征的特征值;利用WOA-ELM模型可以有效实现GIL设备机械故障诊断与预警。     

5G无线通信基站共享电力杆塔的应用研究

将5G无线通信基站安装在电力线杆塔上,可以通过电力线路杆塔共享促进5G网络建设,实现电力企业和通信公司的互利共赢。重点讨论了5G基站的新架构,分析了把基站应用到电力杆塔上应考虑的供电、接地、安装等问题,并给出了相应的解决方案。     

短开路耦合谐振器加载的宽带带通滤波电路

提出了一种基于短开路耦合器加载的宽带带通滤波电路. 该滤波电路通过在输入和输出端口之间,并连加载短路耦合微带谐振器和开路耦合微带谐振器实现5个传输极点和3个传输零点的带通选择特性. 对所提出的短开路耦合谐振器进行了奇偶模理论分析,揭示了其传输零极点形成的物理机理. 最后,对所提出的滤波电路进行了加工测试. 测试结果表明,所提出的宽带滤波电路能够在2.0～4.2 GHz频率范围内实现 3 dB 带通传输,工作相对带宽为73%,仿真和实测结果吻合较好.