基于约束关系的变强度组合测试用例集生成算法

针对传统的变强度组合测试方法对系统中各因素之间的约束关系考虑不足,从而可能导致测试用例冗余的问题,论文提出了一种基于one-Test-at-a-time策略的变强度组合测试用例集生成算法,该算法充分考虑了因素间的约束关系,从而在一定程度上减少了测试用例集的规模。最后通过实验验证了算法的可行性和有效性。     

Entity Framework数据访问性能优化的几种方法

Entity Framework一般通过LINQ代码或lambda表达式自动生成SQL语句,开发效率很高,然而使用时如果不注意会引来性能问题。通过对不同方法使用Entity Framework进行比较,提出Entity Framework数据访问性能优化的几种方法,包括更新数据时使用无跟踪查询、通过附加数据修改和删除数据、合理使用ToList()和FirstOrDefault()、合理使用预先加载。经过性能测试,这些方法是有效的。     

基于MEMS声传感器的圆柱壳体振动陀螺振型检测技术

振动陀螺谐振子振型一般采用激光进行非接触式测量,这种方法存在设备成本高、操作复杂、效率低等问题,因此,提出了一种基于MEMS声传感器的圆柱壳体振动陀螺谐振子振型测试方法。该方法利用体积小,指向性高的MEMS声传感器对谐振子振动声场进行高分辨率测量,获得精确的谐振子振动分布情况,建立了谐振子声波测试实验系统,进行了测试实验,并与激光测振仪的测量结果进行比对。实验结果表明,该测试系统具有较高的振型测量精度。这种测试方法成本低,操作简便,测量精度高,可以实现谐振子振型的高精度快速测量,为后续的谐振子修形及陀螺控制提供重要基础。     

Solvent extraction of oil from soybean flour II— pilot plant and two-solvent extractions

The process of grinding soybeans to a fine flour and extracting the flour with hexane was studied on a pilot plant scale. The crude oil from the pilot plant study had 15 ppm phosphorus and was suitable for physical refining after a light acid pretreatment and bleaching. The refined oil showed a Lovibond color of 1.4 yellow and 0.3 red. The pilot plant study also showed that grinding of the soybeans and the separation of solid from miscella were the most difficult steps in solvent extraction with fine flour. A laboratory study on separation of miscella from meal by aqueous ethanol reduced the hold-up volume, but it did not remove all the miscella. A test with betacarotene showed that only the miscella outside the flour particles was displaced. Aqueous ethanol solutions used as a second solvent extracted additional nontriglyceride materials (primarily phospholipids) from the meal. Also, the free fatty acid content of the oil was increased with aqueous ethanol solution wash. The quality of the extracted crude oil was lowered by using a second solvent, but it had the advantage of needing only one centrifugation to separate miscella from meal.     

试验温度和停放时间对胶料加工性能的影响

研究试验温度和停放时间对胶料加工性能的影响。结果表明，试验温度对胶料的门尼粘度、门尼焦烧时间和硫化特性均有一定影响。门尼粘度测定的试验温度选择100℃；门尼焦烧时间测定的试验温度一般选120℃，SBR胶料可提高至130℃左右，以缩短试验时间；硫化特性测定的试验温度一般选185℃。试验前模腔达到规定温度后再保持15min，以使转子与模腔温度一致。胶料停放时间应控制在2h左右。     

改进的APRIORI算法在试卷系统数据挖掘中的应用

本文通过对数据挖掘技术的研究,采用关联规则法对学生答题数据进行分析,并在关联规则使用中采用改进型的Apriori算法进行运算,构建高频集,并对于高分学生和低分学生的试卷进行了加权处理,使得高频集中的试题在知识点和难度上的关联更加突出,便于在自动组卷时更科学地评价试卷.     

软件安全性检测技术综述

该文阐述了网络软件安全检测的重要性,介绍了现有的主要检测方法,包括形式化安全测试、基于模型的安全功能测试、语法测试、基于故障注入的安全测试、基于属性的测试、模糊测试、基于风险的安全性测试、基于故障树的安全性测试以及基于渗透的安全性测试。     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

Available nitrogen in soils and its determination by the ‘Nmin-method’ and by electroultrafiltration (EUF)

Excess nitrogen fertilizer rates are an environmental hazard. To avoid excess rates, the level of available nitrogen in the soil must be known and considered for assessing the nitrogen fertilizer rate. In arable soils nitrate and exchangeable ammonium in the rooting depth of a crop are directly available to plant roots. These two nitrogen forms are recovered with the Nmin method and they are considered in assessing the nitrogen fertilizer rate for arable crops.Besides nitrate and ammonium recovered by the Nmin method from soil samples taken in early spring, a considerable amount of organic soil nitrogen may be mineralized during the growth period and contribute to crop nutrition. The nitrogen mineralization potential can be determined in incubation tests. The absolute quantities of mineralized nitrogen thus obtained, however, are much higher than the mineralization rates under field conditions. It is for this reason that incubation tests have not obtained a major importance for assessing nitrogen fertilizer rates.With the electro-ultrafiltration (EUF) method nitrate, ammonium, and a minor portion of organic soil nitrogen are extracted from a soil suspension. There is experimental evidence that this organic nitrogen (=Norg) is easily mineralizable. Based on field experiments with cereals and maize formulae were established by which the nitrogen fertilizer rate can be calculated. In these formulae nitrate, ammonium and organic nitrogen extracted by EUF are considered.Advantages and drawbacks of the Nmin method and EUF method are discussed.     

New and Improved Tests for Adhesion

Three new methods are discussed for measuring the work G_a, required to detach unit area of an adhering material from a substrate. The first is a simple modification of the Outwater double-torsion test for long rectangular plates, bonded together. This method is suitable for evaluating aluminum-epoxy bonds, for example, or the transverse strength of fibrous composites. The second is a pull-off test for long strips adhering to a rigid surface. It seems suitable for adhesive tapes and laminates. The third is a reconsideration of the “blister” test for films and coatings, in which a circular debond at the interface is made to grow by internal pressure. The relation obtained between pull-off force F for a strip, or blow-off pressure P for a layer, takes the unusual form:

F⁴ (or P⁴) ∞ KG³_a

where K is the tensile stiffness of the detaching layer. This dependence arises from the non-linear (cubic) relation between load or pressure and deflection in these configurations. Nevertheless, the product Fθ, where θ is the angle of detachment of a strip, or Py, where y is the height of a “blister”, give direct measures of the strength of adhesion G_a, independent of the stiffness of the adhering material and of the extent of detachment.