Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen

A method to obtain mechanical properties using a bonded (double) cantilever beam (or three point bend) specimen loaded in a manner to produce pure shear in the adhesive layer is reviewed. A revised mathematical solution which allows for easier interpretation of optimum beam dimensions to the one originally developed by Moussiaux, Cardon and Brinson for the static case is presented. An extension of this solution for a fixed/fixed viscoelastic beam under steady state oscillations developed by Li, Dickie and Morman is also discussed. Previous results using a vibrating beam to determine the complex viscoelastic properties of a bonded beam are reviewed. These results demonstrate conclusively that dynamic mechanical thermal analysis (DMTA) measurements discriminate differences in surface treatments and various environmental conditions. New measurements are presented that indicate the DMTA procedure can be used to quantify damage simulated by imbedded flaws in beams. The procedure is also shown to assess the effects of both humidity and corrosive environments on lap specimens. It is suggested that this technique may ultimately provide a method to quantify the amount of hidden damage in an adhesive joint subjected to fatigue, moisture or corrosive environments.     

混凝土冻融劣化后动态单轴抗压特性试验研究

为研究混凝土冻融循环后的动态力学性能,利用10 MN动静三轴仪对不同冻融劣化程度的混凝土在不同加载速率下进行单轴压缩试验,同时采集声发射数据分析试验过程中能量释放及损伤演化规律。最后,选用Weibull-Lognormal损伤本构模型,对试验数据进行拟合分析,并分析不同工况混凝土的损伤随应变的发展规律。研究结果表明:①相同冻融劣化程度时,随应变速率增加,峰值应力增大,峰值应变减小;冻融劣化程度会影响峰值应力的率敏感性;②在应变速率相同时,随冻融循环次数增加,峰值应力随之减小,峰值应变随之增大。③混凝土冻融劣化后应力应变关系峰前服从Weibull统计分布,峰后服从Lognormal统计分布。④在相同应变速率下,随着冻融循环次数的增加,混凝土的累计塑性应变整体呈增大趋势。     

中国聚氯乙烯下游应用现状及发展趋势

介绍了当前中国聚氯乙烯行业下游总体运行状况,并从PVC管道、异型材、地板、木塑墙板、软质膜等聚氯乙烯下游产品阐述了下游制品发展现状及特点。     

螺旋齿轮塑件注塑模设计

分析了斜齿轮塑件的工艺特性,给出了实用的注塑模结构,介绍了斜齿轮注塑模各系统的结构设计,论述了模具的工作原理。该模具利用定模推出机构和推管旋转脱模机构解决了螺旋齿轮脱模难的问题。模具结构紧凑,推出可靠,安装维修操作方便,成型塑件质量好,生产效率高。     

汽车用塑料注塑新技术的进展

综述了汽车用塑料的注射成型技术的进展，简单介绍了气体辅助注射成型(GAIM)、水辅助注射成型、熔芯注射成型、反应注射／增强反应注射(RIM／RRIM)成型等技术的特点、生产的汽车部件及最新动向。     

常见塑料溶解性能研究及其混合物的选择性分离

以常见塑料为原料,以有机物为溶剂,研究了塑料在有机溶剂中的溶解性能,提出了选择性分离混合塑料的方案。结果表明,实验所选用的塑料在有机溶剂中的溶解性能和溶解条件不同;可利用塑料与有机溶剂的相容性差别分离混合塑料。     

三种骨灰瓷原料的制备与晶相结构

本实验采用牛、猪、羊三种骨头通过高温煅烧制备骨灰瓷原料。采用XRD和SEM方法表征三种骨灰料的晶相结构和显微结构。实验结果表明 :三种骨灰料经 14 0 0℃煅烧后均存在Ca1 0 (PO4 ) 6(OH) 2 、α -Ca3(PO4 ) 2 种晶相。在 132 0℃煅烧的三种骨灰料中 ,按牛、猪、羊顺序 ,Ca1 0 (PO4 ) 6 (OH) 2 含量分别为 87 2 %、89 1%、71 9% ;β-Ca3(PO4 ) 2 含量最高 ,其可塑性和成瓷性能好 ,从晶相上考虑选择羊骨为较佳的骨灰瓷原料。从白度和透光度上考虑选择牛骨为较佳原料。随着煅烧温度升高 ,三种骨头料的β-Ca3(PO4 ) 2 含量增加 ,羊骨和牛骨中的Ca1 0 (PO4 ) 6 (OH) 2 含量减少 ,而猪骨的Ca1 0(PO4 ) 6 (OH) 2 含量反而增加。因此煅烧温度升高对羊骨和牛骨有利 ,而对猪骨不利     

磁性塑料卷材的研制与应用

磁性塑料卷材由ＣＰＥ树脂、助剂以及磁粉、经塑炼、压延成型的一种柔性薄 强磁性材料。为使大量磁粉（约９０Ｗｔ％－９２Ｗｔ％）能均匀分散在少量树脂（约６Ｗｔ％－７Ｗｔ％）中，必须对磁粉的分散性及其颗粒形状等方面进行研究。     

药物抗氧化作用对DNA发光动力学行为的影响

本文应用ＣｕＳＯ４－Ｐｈｅｎ－Ｖｃ－Ｈ２Ｏ２－ＤＮＡ化学发光体系观察药物对发光动力学行为的影响，研究了九种药物对ＤＮＡ损伤的保护作用，并对其药物结构对抗氧化能力的影响进行了分析。发现药物在该系统中的抗氧化作用有三种类型，提示它们可能在体内不同的反应过程中起不同的作用。在该系统中具有抑制ＤＮＡ损伤发光能力的药物，按其作用强弱依次为阿魏酸、丹参素、芦丁，茶多酚、ＳＯＤ、、丹参酮Ⅱ－Ａ，丹皮酚，五味子乙     

Induction of DNA-double-strand breaks by auger electrons from 99mTc complexes with DNA-binding ligands

The potential of certain Auger electron emitting nuclides for systemic radiotherapeutic applications has recently gained much attention. In particular, the ability of several nuclides, including 111In, 125I, and 123I, to induce DNA double-strand breaks (dsb), a good indicator of cytotoxicity, has been extensively studied. However, this ability has never previously been shown experimentally for 99mTc, which, besides the well-known gamma radiation that is used for diagnostic applications, also emits an average of 1.1 conversion electrons and 4 Auger or Coster-Kronig electrons per decay. Owing to the short range of Auger electrons, the radionuclide needs to be located very close to the DNA for dsb to occur. We synthesized two cationic 99mTcI-tricarbonyl complexes with pendant DNA binders, pyrene and anthraquinone. The X-ray crystal structures of the two complexes could be elucidated. Linear dichroism and UV/Vis spectroscopy revealed that the complex with pyrene intercalates DNA with a stability constant, K, of 1.1 x 10(6) M(-1), while the analogous complex with anthraquinone interacts with DNA in a groove-binding mode and has an affinity value of K=8.9 x 10(4) M(-1). We showed with phiX174 double-stranded DNA that the corresponding 99mTc complexes induce a significant amount of dsb, whereas non-DNA-binding [TcO4]- and nonradioactive Re compounds did not. These results indicate that the Auger electron emitter 99mTc can induce dsb in DNA when decaying in its direct vicinity and this implies potential for systemic radiotherapy with 99mTc complexes.