Oil thermal annealed nano‐structured indium tin oxide thin films for display applications

Indium tin oxide‐coated thin films (200 nm) are deposited on glass substrates by using R.f. sputtering technique. Here, we investigate the influence of new technique of treatment, which is called as “oil thermal annealing” on the nano‐structured indium tin oxide thin films at fixed temperature (150 °C) which improves adhesion strength, electrical conductivity and optical properties (transmittance) of the films. Oil thermal annealing is used to reduce inherent defects that may be introduced during the prepared thin film and cooling processes. Proposed technique is highly suitable for liquid crystal displays, solar cells and organic light emitting diodes, and many other display‐related applications.     

Preparation of micro-patterned surfaces of Si-N-O films and their influence on adhesion behavior of endothelial cells

Microgrooves were prepared on Si(100) surface by photolithography and wet etching.Subsequently,Si-N-O films were deposited on the microgrooves by unbalanced magnetron sputtering(UBMS) and micro-patterned surfaces of Si-N-O films were obtained.The size of the micropatterns was measured by surface profilometer.The chemical composition of Si-N-O films were characterized by X-ray photoelectron spectrometry(XPS) and the wettability of the micropatterned surfaces was evaluated by contact angle measurement.The beh...     

梁端翼缘扩大型梁柱节点抗震性能和设计方法

为使钢框架梁柱节点满足强柱弱梁的抗震设计原则,并使梁上塑性铰远离梁柱节点区,对梁端翼缘扩大型(包括侧板加强型和翼缘端部放大型)钢框架梁柱节点进行了往复荷载下的试验研究,得到了节点类型和梁端翼缘扩大尺寸对节点滞回性能、延性和耗能能力等指标的影响规律.在使用非线性有限元程序对试验结果进行数值模拟的基础上,研究了梁端翼缘扩大段的长度及宽度等参数对节点性能的影响规律和有效取值范围,给出了实用设计方法.使用梁端翼缘扩大型钢框架节点可以有效实现梁端塑性铰外移,是一种在抗震设计中值得推广的具有良好延性和塑性转动能力的新型节点形式.     

型钢翼缘狗骨式削弱在型钢混凝土节点的作用

为了防止地震时型钢混凝土节点核心区发生剪切破坏以及梁柱连接焊缝发生脆性断裂,提出对型钢混凝土节点核心区附近梁端型钢的上、下翼缘采取狗骨式削弱,并系统研究翼缘削弱对提高型钢混凝土节点抗震性能的作用.研究表明,由于在梁端型钢翼缘采取狗骨式削弱,不仅能够将塑性铰控制在梁型钢削弱的位置,从而有效地降低了节点核心区所受的剪力以及梁柱连接焊缝的应力;而且能够改善节点塑性铰区的转动能力和抗剪性能,提高节点的延性和耗能能力.     

Investigation on film cooling characteristics from a row of converging slot-holes on flat plate

Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles (converging slot-hole) on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vo...     

高速钢表面PN＋PVD复合处理工艺和性能研究

采用多弧离子镀设备,在高速钢W18Cr4V上先进行等离子氮化,再沉积TiN薄膜,研究了不同渗氮温度和时间对PN＋TiN薄膜组织和性能的影响。结果表明,温度为500℃左右和时间为2h以上条件下对W18Cr4V进行渗氮处理后再沉积TiN薄膜,可以得到最佳的薄膜表面显微硬度（1800～2000HV0.05）和膜／基结合力（50N）,涂层耐磨性也得到明显提高。     

Mixed convection heat and Mass transfer in a vertical channel with film evaporation

Numerical results are presented for effects of latent heat transport associated with film vaporization on laminar mixed convection heat and mass transfer in a vertical channel with a half channel width b = 0.01 m. The influences of the inlet liquid mass flowrate and wall temperature on the film vaporization and the associated heat and mass transfer characteristics are examined for air-water and air-ethanol systems with gas Reynolds number Re_g = 2000. Predicted results obtained by including transport in the liquid film are contrasted with those where liquid film transport is neglected, showing that the assumption of an extremely thin film made in Lin et al. (1988) and Yan and Lin (1989) is only valid for systems having small liquid mass flow rates. Additionally, it is found that the interfacial heat flux is predominantly determined by latent heat transfer connected with film evaporation.     

钢框架-钢板剪力墙结构修复后的使用性能指标

为便于钢框架-钢板剪力墙结构震后快速修复,统计既有实验结果,提出修复后使用的三级性能指标,基于等效拉杆理论,研究结构在侧向载荷作用下塑性铰的出现顺序、层间位移角和结构应力发展等情况,并建立有限元模型对指标进行验证.结果 表明:在一级修复性能指标(位移角1/220)下,结构板墙轻微受损,对应的修复方法为对板墙进行轻微修复;在二级修复性能指标(位移角1/110)下,结构板墙几乎全面进入塑性状态,需要考虑换板或增加加劲肋修复;在三级修复性能指标(位移角1/85)下,结构板墙已经全部进入屈服状态,而且框架梁端也出现塑性铰,此时不仅需要对板墙进行修复,还要考虑对框架进行修复.     

A novel electroless silver depositing method for magnesium alloys

Depositing silver on magnesium alloy by both electroless plating and organic coatings was studied. The organic coating was made by immersing samples in organosilicon heat-resisting varnish. In this method the organic coating acts as interlayer between the substrate and silver film. When the reaction starts, silver deposits directly on the interlayer. X-ray diffraction and SEM analysis were used to determine the composition and morphology of the interlayer and silver film. The potentiodynamic polarization curves for corrosion studies of coated magnesium alloys were performed in a corrosive environment of 3.5% NaCl（mass fraction） at neutral pH （6.9）. The results indicate that compared with the substrate, the corrosion resistance of coated magnesium alloys increases greatly. Moreover, the method proposed in this work is environmentally friendly, non-toxic chemicals were used. In addition, it provides a new concept for the corrosion inhibition of magnesium alloys.     

Preparation and characterization of TiO2 photoelectrode codoped with aluminum and boron and its application in dye-sensitized solar cell

Nanocrystalline titania films codoped with aluminum and boron were prepared by cathodic vacuum arc deposition. In the process, titanium alloy target was used under an O2/Ar atmosphere, and sensitization of films were carried out by natural dye-sensitized complex in anhydrous ethanol. The structure, surface morphology and UV-vis spectra of titania films codoped were measured by X-ray diffraction analysis, scanning electron microscopy and ultraviolet-visible spectrometer. Theas-deposited films are found to be amorphous. The films annealed were examinedto be of anatase structure with orientation along the (101) planes, the averagecrystal size is in the range between 41 and 45 nm. SEM results show that thereare some pores in the codoped titania films, the optical properties of the dye-sensitized films were also measured which reveals that the spectral responses of films shift to the visible region. Under simulated sunlight illumination, the overall energy conversion efficiency of dye-sensitized nanocrystalline solar cell is 0.9%.