The establishment of the statistical-thermodynamic model of D81-structure and its application to α-Nb5Si3

A statistical-thermodynamic model for binary nonstoichiometric A₅B₃ with D8₁-structure has been established on the basis of the grand canonical ensemble. In the model the average chemical potentials according to the composition and a new extra equation as a boundary condition are proposed for more accuracy and free experimental data calculations. The model can be used in any A₅B₃ type compounds with D8₁ structure. The establishment method of the statistical-thermodynamic model can be extended to other complicated structures. We apply the statistical-thermodynamic model to α-Nb₅Si₃ and the parameters used in the model are obtained from the first-principles' calculations. From these parameters the expression for the point defect concentrations as a function of compositions and temperatures is obtained by numeral calculations. The constitutional defects and thermal defects in α-Nb₅Si₃ are discussed.     

高沸点溶剂法合成原乙酸三甲酯

对低沸点溶剂法制备原乙酸三甲酯工艺进行了改进，比较了煤油、2-乙基己醇、氯苯、异佛尔酮、邻苯二甲酸二丁酯、乙二醇二丁醚等高沸点溶剂对反应的影响，筛选出最优高沸点溶剂煤油：研究了新反应体系的醇解pH值、溶剂的循环使用次数对反应的影响及溶剂循环损耗率，结果表明，醇解的最佳pH值为5．6；随着溶剂循环次数增加，原乙酸三甲酯收率从83．6％(1次)逐渐下降到76．7％(16次)；溶剂次平均损耗率4．6％。实现了直接蒸馏产品，溶剂循环使用的新工艺。避免了旧工艺先蒸溶剂，后蒸产品，产品大量分解，收率低等缺点。     

多点多板多分型面注塑模具的简化设计

应用锁扣装置、组合拉杆结构，减少导柱数量，简化了多点多板多分型面注塑模具的设计。     

Reliability-based robust design optimization: A general methodology using genetic algorithm

In this paper, we present an improved general methodology including four stages to design robust and reliable products under uncertainties. First, as the formulation stage, we consider reliability and robustness simultaneously to propose the new formulation of reliability-based robust design optimization (RBRDO) problems. In order to generate reliable and robust Pareto-optimal solutions, the combination of genetic algorithm with reliability assessment loop based on the performance measure approach is applied as the second stage. Next, we develop two criteria to select a solution from obtained Pareto-optimal set to achieve the best possible implementation. Finally, the result verification is performed with Monte Carlo Simulations and also the quality improvement during manufacturing process is considered by identifying and controlling the critical variables. The effectiveness and applicability of this new proposed methodology is demonstrated through a case study.     

煤液化油实沸点蒸馏的模拟实验

采用TD200简易蒸馏装置对石油醚和液体石蜡进行了实沸点蒸馏，得到实沸点蒸馏数据，并绘制了实沸点蒸馏曲线和各馏分质量百分数与温度关系曲线，得出主要馏分所在的沸程分别为石油醚64．5℃～68℃，液体石蜡412℃～420℃；同时计算出了二者的平均沸点为65.73℃和404．36℃．这些曲线及数据不仅对石油醚和液体石蜡的组成和使用性能有参考价值，而且这种分析方法为煤液化油的实沸点蒸馏奠定了基础。     

Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

基于Gabor多尺度空间的不变兴趣点检测

针对以往仿射不变兴趣点的特征尺度不能直接断定的问题, 提出一种基于Gabor多尺度空间的不变兴趣点检测算法。该算法主要包括三个步骤：应用Gabor滤波器组与图像卷积建立图像Gabor多尺度空间; 通过极大值准则检测兴趣点并直接断定特征尺度; 采用二阶矩矩阵描述兴趣点局部结构。实验结果表明, 相比较其他Hessian-Affine、MSER等算法, 该算法在图像模糊和JPEG压缩情况下可重复率和可匹配率均取得最好结果, 是一种能有效直接提取特征尺度的兴趣点检测算法。     

仪表联锁一体化控制单元(ITCC)在压缩机防喘振控制上的应用

介绍了基于PLC的压缩机一体化控制系统,PLC和现场总线系统(DCS)、安全仪表系统(SIS)、马达一体化控制系统(MCC)等信号之间的相互关系。主要论述了压缩机的防喘振控制理论,防喘振控制器的功能及防喘振控制在赛科乙烯装置裂解气压缩机的应用。     

基于改进符号化度量方法的机场噪声异常检测

机场噪声中的异常情况拥有很大价值,利用它能够及时完善飞机和机场的设备。结合机场噪声数据的特点,对上述问题进行研究并提出一种基于改进的符号化聚集近似(Symbolic Aggregate Approximation,SAX)相似性度量的单监测点的时间序列异常检测方法。其运用相似性度量方法计算出度量结果,再运用k近邻异常检测方法进行异常发现,最后发现异常时间段。该方法在理论验证可行性之后在某机场的实测数据中进行应用,取得了良好的效果。