腐解稻草DOM提取液洗脱六价铬污染土壤试验研究

工矿企业产生的铬渣、含铬废水由于管理不善导致土壤铬污染严重,迫切需要寻求低成本铬污染土壤修复技术。提出腐解稻草中溶解性有机质（Dissolved Organic Matter, DOM）提取液洗脱铬污染土壤的技术,通过实验室模拟试验,以2种铬污染土壤（总铬含量为分别为121.54、941.90 mg/kg,六价铬含量分别为119.90、856.90 mg/kg）为研究目标,采用振荡淋洗法考察了固液比、淋洗时间、淋洗次数等因素对土壤中总铬、六价铬洗脱效果的影响,并探讨了淋洗前后铬形态变化及淋洗后土壤残留六价铬的持续钝化能力。研究结果表明：稻草经35 d腐解后的DOM提取液洗脱土壤中铬效果最佳,确定为最佳淋洗剂;固液比1：15、淋洗4h/次、淋洗2次为最佳淋洗工艺条件,该条件下,2种铬污染土壤总铬分别洗脱了47.79%、85.92%,六价铬含量分别削减了51.76%、95.09%;DOM提取液呈弱碱性,包含大量羧基、羟基及酚类物质,对水溶态、弱酸提取态和残渣态铬有较好的洗脱效果,有效降低了土壤环境风险,且能持续钝化淋洗后土壤中残余的六价铬。     

CaCO3分散剂的合成及工艺优化

以苯乙烯磺酸钠（SSS）、聚乙二醇单甲醚丙烯酸酯（MPEGA）、丙烯酸二甲氨基乙酯（DMAEA）为单体通过水溶液聚合法制备超分散剂SMD用于分散无机颜料,具有低污染的优点。通过中心复合设计法建立数学模型优化工艺条件,经过证实,建立的多元线性回归方程预测准确。当引发剂用量8%,聚合温度66℃,反应时间4.5 h时,制得的超分散剂具有较好分散性能,分散CaCO₃浆料黏度可低至101.43 mPa·s。     

Isolation and Functional Characterization of a Salt-Responsive Calmodulin-Like Gene MpCML40 from Semi-Mangrove Millettia pinnata

Salt stress is a major increasing threat to global agriculture. Pongamia (Millettia pinnata), a semi-mangrove, is a good model to study the molecular mechanism of plant adaptation to the saline environment. Calcium signaling pathways play critical roles in the model plants such as Arabidopsis in responding to salt stress, but little is known about their function in Pongamia. Here, we have isolated and characterized a salt-responsive MpCML40, a calmodulin-like (CML) gene from Pongamia. MpCML40 protein has 140 amino acids and is homologous with Arabidopsis AtCML40. MpCML40 contains four EF-hand motifs and a bipartite NLS (Nuclear Localization Signal) and localizes both at the plasma membrane and in the nucleus. MpCML40 was highly induced after salt treatment, especially in Pongamia roots. Heterologous expression of MpCML40 in yeast cells improved their salt tolerance. The 35S::MpCML40 transgenic Arabidopsis highly enhanced seed germination rate and root length under salt and osmotic stresses. The transgenic plants had a higher level of proline and a lower level of MDA (malondialdehyde) under normal and stress conditions, which suggested that heterologous expression of MpCML40 contributed to proline accumulation to improve salt tolerance and protect plants from the ROS (reactive oxygen species) destructive effects. Furthermore, we did not observe any measurable discrepancies in the development and growth between the transgenic plants and wild-type plants under normal growth conditions. Our results suggest that MpCML40 is an important positive regulator in response to salt stress and of potential application in producing salt-tolerant crops.     

In Vitro Characterization of Human CD24hiCD38hi Regulatory B Cells Shows CD9 Is Not a Stable Breg Cell Marker

Regulatory B (Breg) cells are endowed with immune suppressive functions. Various human and murine Breg subtypes have been reported. While interleukin (IL)-10 intracellular staining remains the most reliable way to identify Breg cells, this technique hinders further essential functional studies. Recent findings suggest that CD9 is an effective surface marker of murine IL-10 competent Breg cells. However, the stability of CD9 and its relevance as a unique marker for human Breg cells, which have been widely characterized as CD24^hiCD38^hi, have not been investigated. Here, we demonstrate that CD9 expression is sensitive to in vitro B cell stimulations. CD9 expression could either be re-expressed or downregulated in purified CD9-negative B cells and CD9-positive B cells, respectively. We found no significant differences in the Breg differentiation capacity of the CD9-negative and CD9-positive B cells. Furthermore, CD9-positive B cells co-express CD40 and CD86, suggesting their nature as B cell activation or co-stimulatory molecules, rather than regulatory ones. Therefore, we report the relatively unstable CD9 as a distinct surface molecule, indicating the need for further research for a more reliable marker to purify human Breg cells.     

特殊工业粉尘地区复合绝缘子腐蚀失效过程研究

硅橡胶复合绝缘子因其优异的憎水性及憎水迁移性而具备较好的防污闪能力,往往作为应对污闪事故的首选方案。但在部分特殊工业粉尘地区,复合绝缘子在短时间运行后会出现爬电及蚀损现象,并发展为绝缘失效。为研究特殊工业粉尘地区复合绝缘子的腐蚀失效过程,测试了某特殊工业园区内运行的复合绝缘子的表面污秽度及污秽成分、污闪电压梯度、憎水性能及微观性能,并分析了其腐蚀失效过程。主要结论如下:绝缘子表面等值盐密为0.1~0.2 mg/cm²,其污秽成分与化工污源类似;存在自然污秽时绝缘子表面憎水性良好,但其憎水性的减弱、恢复及迁移特性均不能满足运行要求;绝缘失效的起因是电晕放电导致憎水性降低,进而导致伞裙电蚀损,最后发展为绝缘失效。     

型材产生壁厚偏差的原因及解决方法

就型材生产过程中产生壁厚偏差的原因进行了分析，并就解决偏差的方法进行了探讨。     

高pH值污水杀菌剂的研究

介绍了高pH值污水细菌含量状况，研究了高pH值污水细菌生长与抗药性的变化规律，研制出针对高pH值污水应用的高效杀菌剂。     

仪表视窗注射模设计

分析了电器仪表视窗的工艺性,介绍了电器仪表视窗注射模具的结构设计,并对采用公差带来计算成型零件尺寸的方法进行了初步的探讨,可以在一定程度上预测模具的使用寿命。     

铸造车间冲天炉消烟除尘净化处理

铸造车间冲天炉烟尘净化是铸造生产中进行劳动保护,消除环境污染的基本要求.采用喷水式火花捕集器除尘装置,可有效地净化冲天炉烟尘,减少对环境的污染.