提升机液压站及制动系统故障分析

通过对TE121液压站及制动系统常见的故障分析,提出解决方案。     

用基团贡献法预测纯物质蒸气压

对应状态原理与基团贡献法结合，提出一个新的蒸气压估算方程（ＲＬＹＭ）。通过对烷烃、烯烃、炔烃、环烷烃、环烯烃、醇、环醇、酮、醚、芳烃、酚、萘在内的１７４种有机物质蒸气压实验数据的关联，获得了３０种基团的贡献参数值。新模型的预测精度优于现有的对应状态法，并且对高碳分子仍有较好的估算精度。总的关联误差小于１．１７％。     

煤头小型低压法甲醇装置合成压力的参变的效应

本文对Ｌｕｒｇｉ低压法甲醇工艺中压力的参变效应进行了探讨．通过计算机模拟，给出了合成压力变化的效应情况．计算结果表明煤头小型低压法甲醇装置的合成压力应高于大型装置的合成压力，其值在７．３～８．０ＭＰａ之间可取得最佳的节能降耗效果．     

MPC系统模块结构中的流场研究

本研究中,应用Simple数值计算方法开发了求解MPC系统模块结构中二维流场分布的计算软件。为了验证计算结果的精确性,用多普勒测速仪实测了用有机玻璃制成的MPC模块二维模型的流场,模拟计算结果与实测值对比取得了较好的一致性。四种不同流出角的MPC模块平均总压损失计算结果表明,已开发的软件可作为设计低流阻MPC模块的良好工具。     

Asymmetric alumina membranes electrochemically formed in oxalic acid solution

Alumina membranes were fabricated by anodizing aluminium metal in 0.15 M oxalic acid. The growth kinetics of the porous layer were investigated in the temperature range –1 to 16 °C using linear potential scans up to 70 V. The faradaic efficiencies of metal oxidation and of porous layer formation, determined by applying Faraday's law, were found to be independent of both temperature and electrical charge. SEM analysis of the metal-side and solution-side surfaces revealed different morphologies. After dissolution of the barrier layer in phosphoric acid, the metal-side surface showed circular pores whose size of about 90 nm was found to be uniform and independent of temperature. The pore population was also practically independent of temperature and a value of about 4 × 10¹³ pores m^–2 was determined. On the solution-side surface the presence of a deposit partially occluding the mouths of pores was observed. This coating could be removed by chemical etching in NaOH or thermal treatment at 870 °C, where decomposition of oxalate occurs. This supports the hypothesis that the deposit consists of an aluminium salt containing oxalate anions precipitated from the solution. The results show that it is possible to control the morphological characteristics of the anodic alumina membranes by careful choice of experimental conditions.     

反水锤的危害及防止

反水锤是发生在反击式水轮机尾水道中的一种特殊水锤现象，其压力峰值可达正常压力的几倍，甚至十多倍，以致造成肢解转轮、折断导叶、破坏顶盖、抬起转子的严重事故。因此，研究反水锤发生的原因，从而提出防止反水锤事故的措施尤为重要。     

优化SMC模压工艺控制制品收缩率和表面粗糙度

优化SMC模压工艺参数：模压压力分为二阶段，选定最佳压力释放时机和压力；适宜降低模压温度。可显著降低SMC制品的固化收缩率，提高其表观质量、试验表明，同时采用的线收缩率和表面粗糙度两种检测和村定方法具有很好的同一性。     

城市二次加压供水设施污染的防治与对策

从设计、施工、管理等方面，分析了城市二次加压设施污染的原因，提出设计及施工中的防治对策及二次加压设施管理上的对策，以确保城市安全供水。     

Mechanoluminescent pulse pressure sensors. Processing of output optical signal

The process of mechanoluminescence transformation of a pulse pressure sensor is considered. The process consists in excitation of emission under the action of mechanical loading. An algorithm for use in processing the output optical signal of the sensor that makes it possible to determine an input shock pulse is presented. __________ Translated from Izmeritel’naya Tekhnika, No. 10, pp. 28–31, October, 2007.     

非自喷井压力恢复测试方法探讨

介绍了地层测试与抽汲、测恢复联作的设计方法和作业过程，选择了两口典型井，进行了作业过程回顾和成果分析。该技术在改造措施前后均可进行，均可测得满意的压力恢复曲线。