钢铁企业价格预测决策模型体系研究

通过对钢铁企业现行价格管理体系的分析 ,建立了钢铁企业价格预测决策模型体系。充分利用大量的定性、定量信息 ,并把趋势预测和因果预测技术相结合 ,采用组合预测模型对价格进行预测 ,最后对预测出来的多方案进行模糊综合评价 ,给出推荐方案顺序。实际应用表明 ,模型体系是有效的。     

扇形束投影域重建—再投影迭代法

本文所提出的投影域重建——再投影迭代算法可以恢复不完整的扇形束投影数据,从而实现从有限的投影数据重建图象。这种算法把滤波——反投影图象重建过程和再投影的过程纳入一个公式,仅在投影域上估算未知的投影数据,因此避免了重建过程和反投影过程中的插值运算,改善了收敛性,提高了计算精度,缩短了运算时间。模拟实验表明:即使有70％的投影数据丢失,经过两次迭代就能以令人满意的精度恢复丢失的投影数据。     

打括隧道监控量测结果的一元非线性回归分析

针对黄织铁路工程打括隧道923延米V级围岩土质地段,根据施工中的地质动态对打括隧道初期支护中监控量测结果进行一元非性线回归分析,以制定科学施工方案和确定合理支护参数,保证工程质量和作业的安全性。     

SECANT-FUZZY LINEAR REGRESSION METHOD FOR HARMONIC COMPONENTS ESTIMATION IN A POWER SYSTEM

In order to avoid unnecessary damage of electrical equipments and installations,high quality power should be delivered to the end user and strict control on frequency should be made, Therefore, it is important to estimate the power system's harmonic components with higher accuracy. This paper presents a new approach for estimating harmonic component in a power system using secant - fuzzy linear regression method. In this approach the non - sinusoidal voltage or current waveform is written as I linear function. The coefficient of this function is assumed to be fuzzy number with a membership function that has center and spread value. The time dependent quantity is written as Taylor series with two different time dependent quantities. The objective is to use the sample obtained from the transmission line to find the power system harmonic components and frequencies. We used an experimental voltage signal from a sub power station as a numerical test.     

铜密闭鼓风炉生产效益的回归分析

通过铜密闭鼓风炉生产过程中关键指标的回归分析,寻找降低消耗、增加产出、提高经济效益的有效途径     

保序回归的大样本性质

利用保序回归与极大似然估计之间的关系,从极大似然估计解的大样本性质出发,得到了保序回归解的两个大样本性质。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

阳离子交换树脂铁中毒的复苏研究

软化器中使用的阳离子交换树脂容易受到铁离子的污染。采用均匀设计的方法,利用回归分析和最优化技术,研究了复苏剂中各组分对阳离子复苏效果的影响,得出了最佳复苏配方,开发出了一种新的复苏方法。这种方法具有腐蚀性低和复苏效果良好的特点,为生产现场树脂的复苏提供了有益的借鉴。     

鱼雷罐喷粉预处理过程水模研究

在鱼罐喷粉预处理水模实验数据的基础上，进一步利用线性回归确定各工艺操作参数对喷吹基本参数（均混时间、粉剂穿透比和粉剂停留时间）的影响，得出各传输动力学基本参数的函数关系式。     

Projection center calibration by motion

Camera calibration is the first step of three-dimensional machine vision. A fundamental parameter to be calibrated is the position of the camera projection center with respect to the image plane. This paper presents a method for the computation of the projection center position using images of a translating rigid object, taken by the camera itself.

Many works have been proposed in literature to solve the calibration problem, but this method has several desirable features. The projection center position is computed directly, independently of all other camera parameters. The dimensions and position of the object used for calibration can be completely unknown.

This method is based on a geometric relation between the projection center and the focus of expansion. The use of this property enables the problem to be split into two parts. First a suitable number of focuses of expansion are computed from the images of the translating object. Then the focuses of expansion are taken as landmarks to build a spatial back triangulation problem, the solution of which gives the projection center position.