应变速率对中碳低温贝氏体钢强塑性的影响

摘要：为探索低温贝氏体钢的断裂行为,研究应变速率对低温贝氏体钢TRIP效应的影响,采用不同应变速率的拉伸试验对低温贝氏体钢的强塑性进行研究。利用扫描电镜（SEM）、透射电镜（TEM）及X射线衍射（XRD）等试验方法对低温贝氏体钢的微观组织、断口形貌及裂纹走向进行表征。结果表明,随着应变速率的提高,试验钢的屈服强度由771MPa上升至806MPa,抗拉强度由1554MPa上升至1606MPa,断后伸长率由13.5%下降至9.0%。主要原因是高应变速率拉伸引发的绝热温升抑制了残余奥氏体的马氏体相变,对试验钢塑性造成负面影响。     

CREEP CRACK PROPAGATION IN CONVENTIONAL CAST AND DIRECTIONALLY SOLIDIFIED SUPERALLOY RENE 80

The creep crack propagation in superalloy René80 of two different microstructures,i.e.,equiaxed grain structure by conventional casting and columnar grain by directionalsolidification,was investigated under static load at 1123 K.The creep crack growth rate,da/dt,seems to be correlated with the stress intensity factor,K.The creep crack growth ratein the directionally solidified alloy is lower than that in the conventional cast alloy,owing tothe elimination of transverse grain boundaries.The effect of microstructure on creep crackpropagation has also been discussed.     

热应力作用下碳化钨基钢结硬质合金梯形裂纹的形成机理

在自约束型热疲劳试验机上对碳化钨含量不同的钢结硬质合金进行了热疲劳试验，用金相显微镜和扫描电镜对热疲劳裂纹扩展行为进行了研究。结果表明：在热应力作用下，不仅在合金的表面，在合金的内部都形成了“梯形”裂纹。这种形态的裂纹是由试样缺口处的热疲劳裂纹扩展而引起的，合金中的钢基体相阻碍裂纹扩展，而WC硬质相诱导裂纹扩展，这两种因素的综合作用促使热疲劳裂纹成“梯形”扩展。分析认为：使WC粒子在钢基体中均匀分布，提高钢基体的热疲劳抗力，从而来阻止梯形裂纹的形成，是提高碳化钨钢锆硬质合金抗热疲劳性能的有效途径。     

A fatigue-life prediction methodology for notched aluminum-magnesium alloy in gulf seawater environment

Local-strain and linear-elastic fracture-mechanics (LEFM) methodologies have been investigated for prediction of the corrosion-fatigue life of notched components of specially developed Al-2.5Mg alloys exposed to Arabian Gulf seawater environment. Corrosion-fatigue crack initiation life estimates were obtained using strain-life relationships; corrosion-fatigue crack propagation life estimates were obtained using LEFM relationships. The total corrosion-fatigue life was considered to be the sum of the crack initiation and crack propagation lives. Estimated corrosion-fatigue lives were compared with experimentally obtained corrosion-fatigue life data using center-notched specimens of three types of Al-2.5Mg alloys (containing different amounts of chromium) exposed to Arabian Gulf seawater environment. Two notch geometries, a circular notch (K _t= 2.42) and an elliptical notch (K _t= 4.2), were investigated. Good corrosion-fatigue life predictions can be obtained using local-strain and LEFM methodologies by determining the relevant material constants via a few simple fatigue tests on smooth specimens and a few crack-growth-rate tests in the environment at the frequency of interest.     

中美法学教育之比较

当代中国的法学教育发展很快，但由于起步晚，至今在很多方面仍有不足。为便于借鉴美国法学教育之长，特从教育管理、教育目标、教育层次、教育方法、师资等方面进行比较，以探索一条有中国特色的法学教育之路。     

多元靶碰撞级联中的粒子能量

用一种推广的幂指数散射截面求解了溅射输运方程，获得更加一般的渐近解，这个渐近解不但以Urbassek等人几年前所给出的两个解为其特殊情况，而且还为作者提出的SC解提供了新的证据，此外通过计算并分析了Vicanek等人发表的新的输运理论，发现他们所提出的转换理论结果与Monte Carlo模拟结果一致是不正确的。     

车铣加工中心刀塔结构的动力学建模

由于车铣加工中心刀塔结构的复杂性和多结合面性，本文将其分解为四个子系统，结合面用等效弹簧和等效阻尼代替，利用一个柔性结合点可以用二个刚性结合点和一个子结构替换的原理，并运用机械阻抗凝聚法和子结构综合法建立了刀塔结构的动力学模型。     

16Mn钢疲劳短裂纹扩展

用带有盲孔的16Mn钢小圆棒试样进行等幅加载的疲劳试验,研究盲孔边短裂纹的扩展。建立了短裂纹平均扩展速率、裂纹长和名义应力幅的表达式,分析考察了短裂纹扩展的统计规律,讨论了裂纹表面尺寸分布随疲劳循环数的演化情况。     

Modeling of stress ratio effect on Al alloy SAE AMS 7475-T7351: Influence of loading direction

The main goal of this work was to evaluate the effectiveness of Walker’s equation in collapsing the fatigue crack propagation data of a SAE AMS 7475-T7351 aluminum alloy loaded either longitudinally (L-T) or transversely (T-L) to the rolling direction. T-L orientation testpieces presented lower ductility and fracture toughness values than L-T orientation. As a consequence, during the fatigue crack propagation tests, T-L testpieces exhibited a stronger influence of monotonic modes of fracture, resulting in higher Paris exponent values,m. Walker’s model was able to collapse fatigue crack propagation data of L-T test pieces at different applied stress ratios,R. However, for the T-L orientation, due to theR ratio dependency onm andC, simply averaging ofm values for the calculations of Walker’s exponent proved to be inefficient. A simple analytical procedure was proposed by the authors to modify Walker’s model to take into account such effect. For T-L test pieces, when Walker’s model is modified by considering both Paris’s exponent as well the coefficient as a function of theR ratio, the fatigue crack growth data collapses within a narrow band, thus allowing predictions to be made satisfactorily. The collapsed band is even narrower if the empirical relationm=a+blogC is used instead of simple polynomial equations due to a better correlation coefficient.     

二甲醚火焰传播速度的实验测定

二甲醚被誉为21世纪的绿色燃料，是目前理想的内燃机与民用替代燃料．为了获得二甲醚应用的重要基础参数——火焰传播速度，在定容球弹法、本生火焰法和平面火焰法作出比较分析后，采用本生火焰法实验测定了二甲醚火焰的传播速度．得出了二甲醚火焰传播速度与一次空气系数的关系曲线，并且在一次空气系数约为0．85处，二甲醚火焰传播速度的峰值为0．48m／s．