人工神经网络及其在窑炉动态温度场的模拟研究

本文阐述了人工神经网络的发展、基本原理以及前馈神经网络的反向传播学习算法，并应用单孢层网络进行了窑炉烧嘴温度场分布的仿真研究。结果表明。用非线性神经元网络模拟在窑炉温度场预测和控制方面是可行的。     

Derivation of the multisymplectic Crank–Nicolson scheme for the nonlinear Schrödinger equation

The Crank–Nicolson scheme as well as its modified schemes is widely used in numerical simulations for the nonlinear Schrödinger equation. In this paper, we prove the multisymplecticity and symplecticity of this scheme. Firstly, we reconstruct the scheme by the concatenating method and present the corresponding discrete multisymplectic conservation law. Based on the discrete variational principle, we derive a new variational integrator which is equivalent to the Crank–Nicolson scheme. Therefore, we prove the multisymplecticity again from the Lagrangian framework. Symplecticity comes from the proper discrete Hamiltonian structure and symplectic integration in time. We also analyze this scheme on stability and convergence including the discrete mass conservation law. Numerical experiments are presented to verify the efficiency and invariant-preserving property of this scheme. Comparisons with the multisymplectic Preissmann scheme are made to show the superiority of this scheme.     

Investigating dependencies in software requirements for change propagation analysis

ContextThe dependencies between individual requirements have an important influence on software engineering activities e.g., project planning, architecture design, and change impact analysis. Although dozens of requirement dependency types were suggested in the literature from different points of interest, there still lacks an evaluation of the applicability of these dependency types in requirements engineering.ObjectiveUnderstanding the effect of these requirement dependencies to software engineering activities is useful but not trivial. In this study, we aimed to first investigate whether the existing dependency types are useful in practise, in particular for change propagation analysis, and then suggest improvements for dependency classification and definition.MethodWe conducted a case study that evaluated the usefulness and applicability of two well-known generic dependency models covering 25 dependency types. The case study was conducted in a real-world industry project with three participants who offered different perspectives.ResultsOur initial evaluation found that there exist a number of overlapping and/or ambiguous dependency types among the current models; five dependency types are particularly useful in change propagation analysis; and practitioners with different backgrounds possess various viewpoints on change propagation. To improve the state-of-the-art, a new dependency model is proposed to tackle the problems identified from the case study and the related literature. The new model classifies dependencies into intrinsic and additional dependencies on the top level, and suggests nine dependency types with precise definitions as its initial set.ConclusionsOur case study provides insights into requirement dependencies and their effects on change propagation analysis for both research and practise. The resulting new dependency model needs further evaluation and improvement.     

强化环保设计,促进水泥工业的可持续发展

从烟(粉)尘排放总量控制、大气污染物排放标准、清洁生产、中水回用、环境绿化和加强环境法制观念等方面,提出强化水泥建设项目环保设计和建设、促进水泥工业可持续发展的想法和建议。     

Development of bond strength model for FRP plates using back‐propagation algorithm

For the flexural reinforcement of bridge and building structure, synthetic materials whose dynamic properties are superior and those containing the merit of corrosion‐proof are widely used as the substitute for a steel plate. Since FRP plate has improved bond strength owing to the fibers externally adhering to the plate, many researches regarding the bond strength improvement have been substantially performed. To search out such bond strength improvement, previous researchers had ever examined the bond strength of FRP plate through their experiment by setting up many variables. However, since the experiment for a research on the bond strength takes much of expenditure for setting up the equipment and is time‐consuming, also is difficult to be carried out, it is limitedly conducted. The purpose of this study was to develop the most suitable artificial neural network model by application of various neural network models and algorithm to the data of the bond strength experiment conducted by previous researchers. Many variables were used as input layers against bond strength: depth, width, modulus of elasticity, tensile strength of FRP plate and the compressive strength, tensile strength, and width of concrete. The developed artificial neural network model has been applied back‐propagation, and its error was learned to be converged within the range of 0.001. Besides, the process for the over‐fitting problem has been dissolved by Bayesian technique. The verification on the developed model was executed by comparison with the test results of bond strength made by other previous researchers, which was never been utilized to the learning as yet. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5119–5127, 2006     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

Rheological properties and compatibility of NR/EPDM and NR/brominated EPDM blends

Ethylene–propylene–diene terpolymer (EPDM) was modified by bromination reaction. Blending the resulting brominated EPDM with natural rubber (STR5L) and blending the unmodified EPDM with STR5L at various compositions were carried out. The rheological properties of the blends were investigated using a capillary extrusion. Shear flow curves of the pure rubbers and their blends illustrated the pseudoplastic property as shear thinning behavior with a power law index n < 1. True shear viscosity of all blends showed the negative deviation in relation to their additive values. Rheological behavior and two T_g's found from the DSC thermograms at all blend compositions indicated blend incompatibility for both sets of blends. The incompatibility of the vulcanized blends was also found by measuring the spin–spin relaxation time T₂ by pulsed NMR. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 837–847, 2003     

Teeth segmentation of dental periapical radiographs based on local singularity analysis

Teeth segmentation for periapical raidographs is one of the most critical tasks for effective periapical lesion or periodontitis detection, as both types of anomalies usually occur around tooth boundaries and dental radiographs are often subject to noise, low contrast, and uneven illumination. In this paper, we propose an effective scheme to segment each tooth in periapical radiographs. The method consists of four stages: image enhancement using adaptive power law transformation, local singularity analysis using Hölder exponent, tooth recognition using Otsu's thresholding and connected component analysis, and tooth delineation using snake boundary tracking and morphological operations. Experimental results of 28 periapical radiographs containing 106 teeth in total and 75 useful for dental examination demonstrate that 105 teeth are successfully isolated and segmented, and the overall mean segmentation accuracy of all 75 useful teeth in terms of (TP, FP) is (0.8959, 0.0093) with standard deviation (0.0737, 0.0096), respectively.     

4-(α-吡啶甲酰基)-PMP的合成与谱学特性研究

合成了新吡唑啉酮类试剂1-苯基-3-甲基-4-(α-吡啶甲酰基)-吡唑啉-5-酮(简称4-(α-吡啶甲酰基)-PMP,下同)。在表征分子结构的同时,对其红外、紫外吸收光谱,核磁共振氢谱、碳谱,质谱等谱学特性和质谱裂解规律进行了分析与研究。