新型圆锥加脊TEM喇叭天线的分析

ＴＥＭ喇叭是一种超宽带天线，在瞬态场和超宽带雷达的研究中具有良好的理论和应用价值，本文首先应用格林函数法分析了壁无限薄的圆锥加脊ＴＥＭ喇叭天线，计算了喇叭上的电荷分布及截面阻抗，并分析这种ＴＥＭ喇叭天线在不同辐射方向的波形，结果表明这 超宽带和波形保真性。     

Compressive sensing SAR range compression with chirp scaling principle

Compressive sensing(CS) techniques offer a framework for the detection and allocation of sparse signal with a reduced number of measurements.This paper proposes a novel SAR range compression,namely compressive sensing with chirp scaling(CS-CS),achieving the same range resolution as conventional SAR approach,while using fewer range samplings.In order to realize accurate range cell migration correction(RCMC),chirp scaling principle is used to construct reference matrix for compressive sensing recovery.Additionally,error diagrams are designed for measurement of the performance of CS-CS,and some experiments of using real data are performed to deal with the errors caused by three conditions:SNR,sparsity and sampling.     

A novel STAP method for the detection of fast air moving targets from high speed platform

Space-time adaptive processing (STAP) is an effective method for detecting moving target in airborne/spaceborne radar.However,the detection of fast air moving targets from high speed platform is challenged by the range walk of both the clutter and moving targets.It is well known that keystone formatting can be used to compensate for the range walk of multiple moving targets simultaneously without using the knowledge of the motion parameters.However,in the presence of serious Doppler ambiguity of fast air moving targets,distribution of the clutter will be affected by the keystone formatting matched to the ambiguity number of targets,and as a result the STAP performance will degrade.In this paper,a novel STAP method is proposed for the detection of fast air moving targets from high speed platform,which can deal with the range walk of both clutter and targets.Effectiveness of the new method is verified via simulation examples.     

Multi-channel SAR imaging based on distributed compressive sensing

The rapid development of compressive sensing(CS)shows that it is possible to recover a sparse signal from very limited measurements.Synthetic aperture radar(SAR)imaging based on CS can reconstruct the target scene with a reduced number of collected samples by solving an optimization problem.For multi-channel SAR imaging based on CS,each channel requires sufficient samples for separate imaging and the total number of samples could still be large.We propose an imaging algorithm based on distributed compressive sensing(DCS)that reconstructs scenes jointly under multiple channels.Multi-channel SAR imaging based on DCS not only exploits the sparsity of the target scene,but also exploits the correlation among channels.It requires significantly fewer samples than multi-channel SAR imaging based on CS.If multiple channels offer different sampling rates,DCS joint processing can reconstruct target scenes with a much more flexible allocation of the number of measurements offered by each channel than that used in separate CS processing.     

利用Visual C＋＋和Direct3D设计雷达显示器

利用Visual C＋＋和Direct3D对某雷达显示器的实现过程作了详细论述,包括数据采集、PPI型显示器、A型显示器、B型显示器、余晖显示、航迹显示等。通过试验证明,采用Direct3D绘图方式比采用GDI绘图方式效果好,更适用于数据处理量大、天线扫描速度快的雷达显示器。     

一种雷达和摄像机的空间标定方法

多传感器融合技术已经广泛应用在智能汽车环境感知领域中;雷达和摄像机的空间标定是伴随信息实时融合的道路检测技术的基础;结合智能汽车的实际应用,提出了针对激光雷达和摄像机的空间标定方法;通过特制的标定板来获得雷达数据和图像数据,选取激光雷达坐标系作为世界坐标系,通过参数拟合的方法来求取图像坐标系与雷达坐标系的变换关系,进而实现两种传感器的空间配准;该方法只需要标定板就能够完成激光雷达和摄像机的空间标定,标定精度高,实现了多个传感器世界坐标系的统一,避免了后续处理中数据解释的二义性;实验结果表明这种方法简单准确,满足系统要求。     

基于FPGA的雷达状态参数采集系统设计与实现

为使雷达回波模拟系统能够逼真地模拟真实作战环境,有效地对雷达各分系统进行测试,提出了雷达状态参数采集电路的设计方案,并给出了其软硬件实现;该方案以FPGA为核心,解决了不同状态参数的实时性采集问题,并通过制定串行传输协议,避免了数据传输过程中的冲突,保证了各状态参数传输的准确性,输出接口采用LVDS标准接口,确保了各状态参数的高速长距离传输;实验结果表明,该系统工作稳定,能够准确、实时地采集并传输雷达状态参数,且便于与其他数字电路的集成,满足系统设计的要求。     

Edge diffraction correction for 3D scattering center modeling based on the shooting and bouncing ray technique

In the traditional scattering center extraction method based on the shooting and bouncing ray(SBR) technique,only the physical optics contribution of the target is considered.However,the physical optics method is unable to describe the contribution of the actual edge diffraction.By comprehensively considering the specular reflection and edge diffraction contribution of the target,an edge diffraction correction method for 3D scattering center modeling based on the SBR technique is proposed.Using the SBR technique and combining the image domain ray tube integration and equivalent edge currents method,the edge diffraction correcting formula for the 3D inverse synthetic aperture radar image is derived.Simulation results show that the proposed method is able to effectively improve the modeling accuracy of the 3D scattering center.