浅谈GPS导航系统在油田运输管理中的应用

我油田地处华北东部,随着油田不断发展,对外承包业务愈来愈多。道路营运车辆也日益增多,营运范围也逐渐扩大,给道路运输经营管理与车辆合理调度工作提出了新的要求,而全球卫星定位系统的发展为道路运输管理的有效指挥、协调控制和管理提供了技术支持。本文结合GPS系统的原理,探讨GPS系统在油田运输管理中的应用。     

Photovoltaic effect and carrier transport mechanisms in Hg1-Mnxtdiodes

Hg_1-xMn_xTe semiconducting semimagnetic alloy has been examined in the context of its possible applications in infrared detectors. For analysis of detector properties the intrinsic carrier concentration has been calculated as a function of temperature and crystal composition. The starting material was In-doped Hg_1-xMn_xTe grown by the modified Bridgman method. The as-grown crystals with manganese content of 12-19% were p-type with carrier concentration and mobility of 100 cm²/ Vs at 77 K. An-type layer was formed on the surface by the annealing process in saturated Hg-vapour at 270-320° for 2 hrs. Capacitance-voltage curves have C^-3 dependence on applied voltage indicating that the junction is linearly graded. From standard electrical measurements and spectral characteristics the main detector parameters were determined and compared to those of Hg_1-xCd_xTe devices. The influence of material properties on detector parameters was analyzed. In order to estimate the carrier transport mechanisms, differential resistivities and current-voltage curves were measured over a wide range of temperaturesi.e. 25 to 300 K. From the temperature dependence of the R₀A product, it was established that at high temperatures (150-300 K) the carrier transport is dominated by a recombination-generation mechanism. In low temperature region the excess current at forward bias is probably attributed to carrier tunneling via energy states distributed randomly within the forbidden gap. At reverse bias the leakage surface or volume currents dominate in the carrier transport.     

Electrical transport in UNi0.5Sb2 single crystals

Single crystals of UNi₀.₅Sb₂ were investigated by means of Seebeck coefficient and Hall effect measurements in the temperature range 5–300 K. The results corroborated the occurrence of two magnetic phase transitions: from para- to antiferromagnetic state at T_N = 161.5 K and a spin-reorientation near T_t = 64 K. The first-order character of the latter feature was proved by studying in detail the electrical resistivity and the magnetic susceptibility of single-crystalline UNi₀.₅Sb₂ in the vicinity of T_t.     

Auxin and Root Gravitropism: Addressing Basic Cellular Processes by Exploiting a Defined Growth Response

Root architecture and growth are decisive for crop performance and yield, and thus a highly topical research field in plant sciences. The root system of the model plant Arabidopsis thaliana is the ideal system to obtain insights into fundamental key parameters and molecular players involved in underlying regulatory circuits of root growth, particularly in responses to environmental stimuli. Root gravitropism, directional growth along the gravity, in particular represents a highly sensitive readout, suitable to study adjustments in polar auxin transport and to identify molecular determinants involved. This review strives to summarize and give an overview into the function of PIN-FORMED auxin transport proteins, emphasizing on their sorting and polarity control. As there already is an abundance of information, the focus lies in integrating this wealth of information on mechanisms and pathways. This overview of a highly dynamic and complex field highlights recent developments in understanding the role of auxin in higher plants. Specifically, it exemplifies, how analysis of a single, defined growth response contributes to our understanding of basic cellular processes in general.     

大气生物气溶胶的源排放与源解析研究进展

2019年新冠肺炎(COVID-19)的全球爆发引起了公众对生物气溶胶的广泛关注。生物气溶胶是大气气溶胶的重要组成部分。生物气溶胶由于具有普通气溶胶的理化性质和本身特有的生物学特性,在全球生态系统、气候变化、空气质量和公共卫生等领域均扮演十分重要的角色。然而,目前学术界对生物气溶胶的研究主要集中在采样监测、消杀防护以及其环境与健康效应等方面,关于源特性研究相对滞后。基于此,聚焦大气中微生物的来源现状,综述了最近20年来生物气溶胶的自然源和人为源排放特性研究进展,并阐述了影响源排放和输送过程的主要因素(如生物地理区域、土地利用类型和环境因素等),探讨了当前生物气溶胶的各种源解析方法。最后,给出了生物气溶胶来源下一步的研究展望,以期为深入理解生物气溶胶的来源、输送与变化机理,更好地评估大气微生物污染水平与监控病原体的气溶胶传播提供参考。     

强度传输方程和神经网络融合的三维重构算法

针对原有强度传输方程法所恢复的相位精度不够精确的缺点,提出强度传输方程和神经网络融合的三维重构算法. 利用强度传输方程求解出物体不同角度的初始相位,利用神经网络算法进行优化,根据不同角度的最终恢复相位结合乘法技术重构出三维体信息. 该算法具有精度高的特点,可以为三维成像技术的应用提供参考. 对于实验中的示例图像,该算法将强度传输方程得到的相位误差从21.40%降低为5.26%,重构三维物体与模拟真实物体的相关程度为显著相关.     

基于离散单元法的锥形双螺杆输送及混合机理分析

锥形双螺杆挤出机结构模型与其他普通螺杆挤出机相差很大且构成独特,近年来在聚合物加工行业中发挥了很大的作用。设计螺槽深度与螺杆半径比为1∶2、2∶5、1∶3的三种锥形双螺杆挤出机,通过离散单元法模拟了锥形双螺杆挤出机挤出LDPE、HDPE两种颗粒的过程,分析了锥形双螺杆挤出机螺槽内颗粒速度的变化,同时在不同参数下对三种锥形双螺杆挤出机的输送效率进行了比较。利用EDEM软件对LDPE和HDPE颗粒进行离散元分析,得出不同时刻两种颗粒在三种锥形双螺杆挤出机内的混合情况。结果表明,螺槽深度与螺杆半径比为1∶2的锥形双螺杆挤出机的混合效率优于螺槽深度与螺杆半径比为2∶5、1∶3的锥形双螺杆挤出机。     

用连铸坯生产重轨的研究与实践

简要介绍了包钢钢联轨梁轧钢厂连铸坯轧制重轨的工艺、设备 ,以及重轨产品的质量和力学性能。     

Differential Subcellular Distribution of Cytokinins: How Does Membrane Transport Fit into the Big Picture?

Cytokinins are a class of phytohormones, signalling molecules specific to plants. They act as regulators of diverse physiological processes in complex signalling pathways. It is necessary for plants to continuously regulate cytokinin distribution among different organs, tissues, cells, and compartments. Such regulatory mechanisms include cytokinin biosynthesis, metabolic conversions and degradation, as well as cytokinin membrane transport. In our review, we aim to provide a thorough picture of the latter. We begin by summarizing cytokinin structures and physicochemical properties. Then, we revise the elementary thermodynamic and kinetic aspects of cytokinin membrane transport. Next, we review which membrane-bound carrier proteins and protein families recognize cytokinins as their substrates. Namely, we discuss the families of “equilibrative nucleoside transporters” and “purine permeases”, which translocate diverse purine-related compounds, and proteins AtPUP14, AtABCG14, AtAZG1, and AtAZG2, which are specific to cytokinins. We also address long-distance cytokinin transport. Putting all these pieces together, we finally discuss cytokinin distribution as a net result of these processes, diverse in their physicochemical nature but acting together to promote plant fitness.     

Hygroresponsive Torsional Yarns and Actuators Based on Cascade Amplification of the Deformation

Fiber-based hygroresponsive torsional actuators provide desirable merits, such as light weight and shapeability, for developing smart systems to harvest energy from moisture which is a ubiquitous natural resource. A key challenge in this development is to realize moisture-triggered actuation combining large actuation and rapid responses. Here, a multiscale design strategy is explored to create high-performance hygroresponsive torsional actuators consisting of chitosan and multiwalled carbon nanotubes (MWCNTs). The superior actuation performance arises from the synergism of contributing factors at different scales, including 1) MWNCTs accelerate the water transport in primary twisted fibers (PTFs), fostering the rotation of PTFs upon moisture stimuli; 2) in situ-formed hierarchically-assembled twists realize cascade amplification of moisture-triggered actuation. Specifically, PTFs are self-twisted to generate secondary helical yarns, that are subsequently over-twisted to yield tertiary coiled yarn. The resultant yarn actuator can reach a maximum rotation speed of 11 400 rpm in 5 s, output gravitational potential energy of 2.4 J kg⁻¹ and gravitational potential power of 0.053 W kg⁻¹ during contraction. This work represents the first design of fiber-based actuators by virtue of moisture-triggered in situ formation of yarns. The established principles of multiscale design will enable high-performance fiber-based hygroresponsive actuators toward advanced intelligent textile and soft robotics.