Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

脱硫吸附剂与吸附脱硫技术

综述了国内外原料气和燃料油吸附脱硫技术在吸附脱硫材料和吸附脱硫工艺方面的研究与开发进展。介绍了分子筛类、金属氧化物类、活性炭类等脱硫吸附剂。分别评述了物理吸附、活化吸附、选择性吸附等燃料油吸附脱硫技术的机理和工艺。     

Study of mass transfer in a vertically moving particle bed electrode

A study was made of the influence of process parameters on the mass-transfer coefficient in a flow-through cell with a cascade of rotating drums partially filled with conductive particles (called the vertically moving particle bed). Copper deposition from an acidic sodium sulphate solution was used as the model reaction. To evaluate the experimental data a macrohomogeneous mathematical model of potential and current density distribution inside the cell was developed. The electrolyte flow distribution between the empty space above the particle bed and through the bed was evaluated. On the basis of these results the following correlation is proposed:

Evaluation of wastewater reclamation processes in a high-tech industrial park

The objectives of this research were to evaluate two different processes using for wastewater reclamation in a hightech industrial park area in Taiwan. The major units of the first AC-RO-IE system included sand filter, an activated carbon (AC) bed, microfiltration module, a reverse osmosis (RO) membrane and ionic-exchange (IE) columns. The second DAF-AC-RO system was comprised of coagulation/flocculation, dissolved air flotation (DAF), an activated carbon bed, microfiltration module and reverse osmosis membrane units. This study was carried out at a pilot-scale plant in situ that operated for approximately 1 year. According to the long-term experimental results, both the AC-RO-IE and the DAF-AC-RO processes illustrated excellent performances on inorganic and organic contaminant removal. Comparing the removal efficiency of the filtration-AC units in the AC-RO-IE system with the coagulation-DAF-AC units in the DAF-AC-RO system, the removal efficiency of TDS, SiO₂ and COD increased by 19.8%, 70.1% and 44.4% in the latter system, respectively. In addition, the combination of PAC-coagulation and DAF units could improve hardness removal, modify the form of dissolved silica, and reduce the SDI and MFI values. It showed good potential as a pretreatment unit in wastewater reclamation processes. Therefore, based on the reclaimed wastewater quality and process operational stability, the DAF-AC-RO system was suggested as a potential process for further application.     

Hybrid systems in seawater desalination—practical design aspects, present status and development perspectives

Ever since seawater desalination has been applied on an industrial scale, and particular in the countries of the Arabian Gulf, the application of desalination processes in dual-purpose facilities—water and power—as a hybrid configuration has been discussed in many feasibility investigations and also planning concepts. It is above all the combination of reverse osmosis with thermal processes that has found increasing interest with the aim of ensuring, as economically as possible, uniform water supplies under the specific, greatly varying load conditions in the Gulf countries. Such design concepts for hybrid configurations encompass straightforward structures with a low degree of coupling between membrane and thermal desalination processes, but range up to very complex configurations with strong interconnections on both the water side and thermally, as well as with several desalination processes connected in series or in parallel. Classical hybrid concepts in which the permeate from an RO desalination component is mixed with distillate from thermal desalination have already been implemented in Saudi Arabian dual-purpose plants, like Jeddah and Yanbu-Medina. Although hybrid systems of greater complexity have been addressed in many design studies and publications, up to now none has been brought to fruition. Coming into consideration asthe design basis for determining the capacity shares of the various desalination processes operated in a hybrid configuration are: arrangement of thermal cycle of the power plant component; water/power ratio of the dual-purpose seawater desalination and power plant; provision of undiminished water production of the desalination plant as electricity generation varies; provision of a specified drinking water quality with regard to composition and salt content; combination of all these aspects. Also gaining in importance are concerns of environmental pollution and sustainable development when selecting seawater desalination and power plant configurations, as well as their optimization when considering desalination and electricity generation as a whole. In the practical design of hybrid membrane and thermal systems, aspects come to light, though, that restrict linking of the two systems and joint utilization of facilities, as conceived in studies and conceptual design investigations. This applies both for common utilization of intakes and the use of heated up cooling water from thermal processes as a feed stream for the RO part of the desalination process. Additionally, requirements of drinking water composition, particularly chloride content, TDS and compliance with a specific residual content of boron, influence specifically the design of the membrane process part and its share in the total desalination capacity. Such practical aspects have greatly influenced the design and configuration of the Fujairah hybrid plant for which, from a total desalination capacity of 100 MIGD (454,600 m³/d), the share of 37.5 MIGD (170,500 m³/d) makes its seawater RO plant the biggest currently being constructed anywhere in the world. From the findings of the engineering of this plant and the idea that, by increasing interconnection between the two processes on the water side, it is possible to advance a hybrid configuration of this type with regard to cost optimization in the membrane installation, but also by joint utilization of the intake equipment, perspectives result for applied research efforts over the near and long terms, for example: long-term behavior of membranes at elevated temperatures; tendency for biofouling in membrane process with common utilization of cooling water and brine; influences of such interconnections on the overall availability of the facility. But also for the operation and maintenance organization of such large facilities, consequences can be foreseen for the future development of hybrid plants, particularly for operation management and organisation of the interplay of the different power plant and desalination systems, monitoring of SWRO membrane replacement and cleaning, as well as controlling water quality.     

航天推进剂废水超临界水氧化反应法处理研究

采用新兴的绿色坏保技术-超临界水氧化反应法，对含偏二甲肼的航天推进剂废水进行了处理研究。试验结果表明，采用小型的管道式连续SCWO反应系统能够迅速将该类推进剂废水中的毒害成分-偏二甲肼彻底分解为无害的CO2和N2。反应温度和反应停留时间是影响偏二甲肼去除率的主要因素，当反应温度超过500℃，停留时间达到95s时，偏二甲肼的COD去除率大于99．9％，完全达到了国家航天推进剂水污染物排放标准的要求。     

中空纤维超滤膜去除乳酸钙中蛋白质的研究

发酵法联合生产乳酸-乳酸钙工艺中,分离出的乳酸钙产品含有蛋白质、还原糖、重金属等杂质,影响产品的品质。本实验研究了中空纤维膜对乳酸钙中蛋白质的去除,并分析了压差、温度、浓度及pH值等因素的影响。得到了较好的工艺操作条件为Δp=0.05MPa,Δ=30g/L,30°C,pH=4。进一步提出用多步超滤能提高蛋白质的去除率15%～27%。     

改良MEA脱碳技术在小氮厂变换气脱碳中的应用

介绍了改良MEA脱碳技术的基本原理、工艺特点以及在工业中的应用情况，实践表明，改良MEA提高了溶液的吸收能力，降低了再生热耗，解决了MEA易降解损耗等问题。     

A2O工艺缺氧生物磷去除

A lab-scale anaerobic-anoxic-oxic （A^2O） process used to treat a synthetic brewage wastewater was investigated. The objectives of the study were to identify the existence of denitrifying phosphorus removing bacteria （DPB）, evaluate the contribution of DPB to biological nutrient removal and enhance the denitrifying phosphorus removal in A^2O bioreactors. Sludge analysis confirmed that the average anoxic P uptake accounted for approximately 70% the total amount of P uptake, and the ratio of anoxic P uptake rate to aerobic P uptake rate was 69%. In addition, nitrate concentration in the anoxic phase and different organic substrate introduced into the anaerobic phase had significant effect on the anoxic P uptake. Compared with conventional A^2O processes, good removal efficiencies of COD, phosphorus, ammonia and total nitrogen （92.3%, 95.5%, 96% and 79.5%, respectively） could be achieved in the anoxic P uptake system, and aeration energy consumption was saved 25%. By controlling the nitrate recirculation flow in the anoxic zone, anoxic P uptake could be enhanced, which solved the competition for organic substrates among poly-P organisms and denitrifiers successfully under the COD limiting conditions. Therefore, in wastewater treatment plants the control system should be applied according to the practical situation to optimize the operation.