Pile Response Adjacent to Braced Excavation

The excavation of soil for the construction of basements or cut-and-cover tunnels results in ground movements. One particular concern is that the excavation-induced lateral soil movements may adversely affect any nearby pile foundation. The lateral loads imposed by the soil movements induce bending moments and deflections in the pile, which may lead to structural distress and failure. This paper presents the results of an actual full-scale instrumented study that was carried to examine the behavior of an existing pile due to nearby excavation activities resulting from the construction of a 16 m deep cut-and-cover tunnel. The pile was located 3 m behind a 0.8 m thick diaphragm wall. Excavation to the formation level that was 16 m below the ground surface resulted in a maximum lateral pile movement of 28 mm. A simplified numerical procedure based on the finite-element method was used to analyze the pile response. Generally, the theoretical predictions were in reasonable agreement with the measured results.     

山西铝厂锅炉水冷壁膨胀异常原因分析及对策

针对山西铝厂160t／h锅炉在实际运行中膨胀异常的问题，对不同的施工方法下，水冷壁膨胀量是否正常这一问题进行分析，找出了水冷壁膨胀异常的原因，并提出了解决对策。     

Repair of Cracked Aluminum Overhead Sign Structures with Glass Fiber Reinforced Polymer Composites

Transportation departments have been using aluminum overhead sign structures since the 1950s. It is well documented that cracks develop in the welds between diagonal and chord members due to fatigue stresses from wind-induced vibration of the slender members. The cracks propagate to complete failure of the members, which can cause collapse of the truss and inflict injuries. The original design of overhead sign structures did not consider fatigue as a limit state. In addition, field welding of aluminum structures for any possible repairs is prohibited. A repair method for the cracked aluminum welded connections between diagonals and chord members using glass fiber reinforced polymer composites (GFRPs) is proposed. The static load carrying capacity of the welded connection, and the cracked connection repaired with GFRP composites are established. The paper describes the surface preparation of the aluminum tubular members, and the architecture and application sequence of the GFRP composite to retrofit the connection. Experimental results are presented from static tests of welded aluminum connections, welded aluminum connections retrofitted with GFRP composites, and new aluminum connections that depend only on GFRP composite elements for their strength. The results from monotonic static tests carried out on cracked welded specimens from actual sign structures show that the retrofitted connection with GFRP reinforcement achieved 1.17 to 1.25 times the capacity of the welded aluminum connection without any visible cracks. This result, and the minimal traffic disruption anticipated in the actual field application, makes this retrofit method a good candidate for implementation.     

螺纹钢牙筋长度不足的原因及解决办法

分析了影响螺纹钢牙筋长度的原因，根据铣床的工作原理，利用刀头夹持长度与凸轮工作轨面半径的几何关系，推导出计算各种不同规格螺纹钢牙筋的工艺参数，解决了螺纹钢牙筋长度不足之问题。     

试谈高炉冷却壁的检漏及维护

高炉冷却壁的检漏及维护，是炼铁工作者十分关心的问题，本文针对邯钢高炉具体情况，探讨了高炉冷却壁漏水的原因，检漏方法，漏水冷却壁的维护及预防措施。     

柘林电站第二溢洪道砼鼻坎截水墙施工

柘林水电站第二溢洪道,在鼻坎先于下部截墙施工中,为了满足当年泄洪,施工先沿截墙自上而下挖掘交通竖井,支撑牢固,安设好提升设备并打通墙底导洞后,再自下而上分层扩挖及浇筑砼.开挖采用登渣作业,出渣用可伸缩手柄架子车经吊篮提升.墙顶砼浇筑,通过预留在鼻坎内的下料小井进料.     

分析再热器超温爆漏与水冷壁结焦控制量的关系

文章介绍了宝钢自备电厂在改善锅炉燃烧工况，控制锅炉水冷壁结焦所采取的技术措施，分析了锅炉水冷壁结焦量与锅炉二次再热器烟气出口平均温度的关系，为解决锅炉水冷壁结焦所引发的二次再热器超温爆漏问题提供了依据。     

重力坝深(底)孔断面钢筋混凝土模型试验研究

文通过7个小尺寸和1个大尺寸的钢筋混凝土断面模型试验，研究重力坝深(底)孔在坝体自重和内水压力以及超内水压力作用下的结构特性和破坏规律。重点探讨混凝土和钢筋应力应变、混凝土开裂、裂缝宽度和裂缝扩展规律，为建立更为科学的孔口配筋理论提供依据。     

厚壳玻璃钢艇体选材、铺层设计及工艺

本文涉及玻璃钢猎扫雷艇艇体材料的优选、铺层设计和工艺等内容。试验确定了以１６２９间苯聚酯树脂为基体、以９００ｇ／ｍ２无碱无捻粗纱短切毡（Ｍ）和８１０ｇ／ｍ２无碱无捻粗纱方格布（Ｒ）为增强体以及（Ｍ＋Ｒ）为基本铺层设计单元的方案。试验表明，按上述材料和铺层制作的层板，性能达到Ｌｅｒｉｃｉ和ＭＨＣ－５１艇壳层板的指标要求。     

预应力工程中的OVM锚固体系

ＯＶＭ锚固体系是我国第一种采用二片四开式，锚碇１８６０ＭＰａ级低松弛钢绞线的预应力锚固体系。本文介绍其基本性能，与其他系列锚具的组合以及它在斜拉桥主索上的应用。