Forced convection in cross flow of power law fluids over a tube bank

The forced convective heat transfer characteristics for incompressible power-law fluids past a bundle of circular cylinders have been investigated numerically. The cylinder-to-cylinder hydrodynamic interactions have been approximated via a simple cell model. The momentum and energy equations have been solved using a finite difference based numerical method for a range of physical and kinematic conditions. The role of the two commonly used thermal boundary conditions, namely, constant temperature or constant heat flux, on heat transfer characteristics has also been studied. Extensive numerical results elucidating the effect of shear-thinning viscosity on the values of Nusselt number have been obtained for Peclet numbers ranging from 1 to 5000, Reynolds number in the range 1-500, flow behaviour index 1?n?0.5 and three values of voidages, namely, 0.4, 0.5 and 0.6, typical of tubular heat exchangers and tube banks. Under all conditions, varying levels of enhancement in Nusselt number are observed due to shear-thinning behaviour. The surface averaged Nusselt number shows strong dependence on the values of voidage, power-law index, Reynolds and Peclet numbers. The paper is concluded by presenting comparisons with the scant experimental results available in the literature.     

反式 -1,4-聚异戊二烯相对分子质量的调节

采用负载钛本体沉淀聚合法,以氢气作链转移剂,制备了不同相对分子质量的反式-1,4-聚异戊二烯(TPI),讨论了老化、氢气调节及塑炼对其相对分子质量的影响,以及不同相对分子质量TPI的结构与性能。结果表明,本体系合成TPI的数均相对分子质量为(5～15)×104,相对分子质量分布为2.00～3.00;门尼粘度为20～120时,随着TPI相对分子质量的降低,其结晶速度提高,结晶度无明显变化,拉伸强度明显降低,扯断伸长率、屈服强度和邵尔A型硬度无明显变化。     

不确定视角下改进TOPSIS法的工程评标模型研究

评标质量决定中标者与招标项目的契合程度,但受经验知识和主观判断等影响,定性指标的量化过程易带有主观模糊性,从而影响结果准确度。为减少模糊因素对评标结果的负作用,引入Z-number模糊数识别定性指标的不确定性,依据熵值原理客观确定评标指标及评标专家权重,TOPSIS法集成指标值,构建基于Z-number理论的改进TOPSIS法评标模型。结果表明,提议方法不仅能明晰度量定性指标值本身的模糊程度,还实现了指标值不确定性的针对化削减。同时,在有效避免主观赋权带来的不确定性基础上,该方法也克服了指标间的不可公度性。通过示例分析与敏感性分析验证了模型的实效性与稳定性。     

基于神经网络的轮胎胎号字符识别

介绍了采用BP神经网络来进行轮胎胎号字符识别的一种尝试性方法。用Matlab来模拟用神经网络进行胎号数字识别这一过程，用投影—变换系数法进行特征提取，确定特征输入、隐含层的神经元和输出后，经训练后可识别胎号，识别率尚可。     

悬浮法合成固体粒状丙烯酸树脂

研究了悬浮法合成固体丙烯酸树脂颗粒。讨论了不同软硬单体配比对丙烯酸树脂颗粒的玻璃化转变温度、相对分子质量及其分布的影响以及不同的引发剂及悬浮剂对其聚合过程、最终产物形态及上述性能的影响。制得的丙烯酸树脂的数均相对分子质量用凝胶渗透色谱(GPC)测定为3.9×104～6.2×104,相对分子质量分布为2.04～2.32;用红外光谱图表征了制得的丙烯酸树脂结构。差示扫描量热法(DSC)测定了聚合物的玻璃化转变温度(Tg)。     

Ionic liquids as electrolytes

Salts having a low melting point are liquid at room temperature, or even below, and form a new class of liquids usually called room temperature ionic liquids (RTIL). Information about RTILs can be found in the literature with such key words as: room temperature molten salt, low-temperature molten salt, ambient-temperature molten salt, liquid organic salt or simply ionic liquid. Their physicochemical properties are the same as high temperature ionic liquids, but the practical aspects of their maintenance or handling are different enough to merit a distinction. The class of ionic liquids, based on tetraalkylammonium cation and chloroaluminate anion, has been extensively studied since late 1970s of the XX century, following the works of Osteryoung. Systematic research on the application of chloroaluminate ionic liquids as solvents was performed in 1980s. However, ionic liquids based on aluminium halides are moisture sensitive. During the last decade an increasing number of new ionic liquids have been prepared and used as solvents. The general aim of this paper was to review the physical and chemical properties of RTILs from the point of view of their possible application as electrolytes in electrochemical processes and devices. The following points are discussed: melting and freezing, conductivity, viscosity, temperature dependence of conductivity, transport and transference numbers, electrochemical stability, possible application in aluminium electroplating, lithium batteries and in electrochemical capacitors.     

UHMWPE混炼接枝马来酸酐研究

讨论了超高相对分子质量聚乙烯(UHMWPE)混炼接枝马来酸酐(MAH)过程中，单体MAH用量、引发剂DCP用量、交联抑制剂己内酰胺(CAILA)用量、流动改性剂硬脂酸钙(CaSt2)用量及混炼温度、时间等工艺条件对UHMWPE接枝率和凝胶含量的影响。用红外光谱表征了接枝物的存在。并用滴定分析法和重量分析法测定了接枝物UHMWPE～g～MAH的接枝率和凝胶含量。实验表明，MAH用量为5份、DCP为0．15份、CALA为0．1份、CaSt2为1份时。混炼温度175∽180℃。混炼时间14min时，可得到接枝率0．75％、凝胶含量1．48%的UHMWPE接枝物。     

闭世界框架下灰色模糊多属性决策方法

针对D-S 证据理论在融合高度冲突的证据时可能导致与直观结果相悖的问题, 已有的基于修改数据模型的方法更多地考虑如何提高冲突证据结果的聚焦程度, 而没有考虑冲突成因以及如何通过冲突原因判断来削减证据之间的冲突. 对此, 提出一种闭世界框架下的灰色模糊多属性决策方法. 根据一般的灰色关联分析方法的基本思路, 将灰色关联度与欧氏距离有机结合, 构造出一种平均相似度对方案进行评价, 进而得到方案的排序结果. 最后, 通过实例分析验证了所提出方法的可行性和有效性.     

Stabilized heteropolyacid/Nafion composite membranes for elevated temperature/low relative humidity PEFC operation

Organic/inorganic composite membranes with different inorganic heteropolyacid (HPA) additives maintain sufficient proton conductivities for atmospheric pressure elevated temperature (>100 °C) polymer electrolyte fuel cell (PEFC) operation. However, membrane and membrane electrode assembly (MEA) processing is severely curtailed because of the solubility of the HPA additives in aqueous media. Composite membranes with the HPA (phosphotungstic acid; PTA) additive rendered insoluble by ion exchanging protons with larger cations such as Cs⁺, NH₄⁺, Rb⁺ and Tl⁺ were fabricated. The additive loss in aqueous media was lowered from nearly 100% (unmodified HPA) to about 5% (modified HPA). The membranes were robust, and demonstrated low H₂ crossover currents of around 2 mA/cm² for a 28 μm thick membrane. All membranes were evaluated at high temperatures and low relative humidities in an operating fuel cell. The conductivities of the composite membranes at 120 °C and 35% relative humidity were on the order of 1.6 × 10⁻² S/cm.     

聚类方法综述

文中对聚类方法作了综述。系统地讨论了聚类研究中的4个关键内容:数据点之间"距离"函数的定义方法、类数目的确定、高效优良的聚类算法和聚类算法好坏的评估。分析了各类聚类算法的优劣性,指出了聚类分析研究的发展趋势。