加强技术创新管理 实现跨越式发展

广钢集团通过加强技术创新管理，取得了一定成效，实现跨越式发展。本文对其进行介绍，为同行提供借鉴。     

SGM装车机油的研制和应用

中国石化上海高桥分公司炼油厂针对上海通用汽车有限公司(SGM)的别克轿车，先后进行了9986126SGM、9986125SGM装车机油的开发认证工作以及研制油在别克车上的适应性试验。配方研制遵照ACC规范、API基础油互换规则及粘度等级互换规则，各项性能满足技术指标规定的质量要求；同时30000km的高温高速行车试验结果表明，研制油具有较好的抑制氧化增稠能力、优良的高温抗氧化性能、清净分散性能和抗磨损性能，在上海通用别克轿车上取得了良好的使用效果。     

岔河集油田开发调整的主要做法与成效

岔河集油田有多个受构造、岩性双重因素控制的中低渗透复杂断块油藏,其主要储集层为河流相沉积。油田20余年的开发历程是典型的滚动勘探开发过程。通过精细科学的地质研究,不断的实践和认识,制定出与其油田地质特点相适应的开发方针,完善了井网部署与加密、产吸剖面调整、油水井配套综合治理等一系列开发对策,并取得了比较好的开发效果。岔河集油田的开发实践对于类似油田开发不乏成功的经验。     

Development of a fuzzy decision model for manufacturability evaluation

A manufacturability evaluation decision model is formulated and analyzed based on fuzzy logic and multiple attribute decision-making under the concurrent engineering environment. The study emphasizes on the treatment of the linguistic and vagueness at the early product development stage. The study also considers the function integration of the total life cycle of a product. Hence, the integrated decision model covers the multi-level, multi-goal requirements of the products. Multiple criteria such as the goal space, the decision space, the function space, the development (i.e., product & process design) space, and the activity space, are then applied under different analysis of decision-making methods. For instances, the fuzzy multiple attribute decision-making (FMADM) combined with activity-based costing (ABC) can be used in the activity decision space. The fuzzy logic decision model can be applied in the goal decision space. The results of this study point out the importance of early decision making capability. An example of a high-pressure vessel is provided to demonstrate the proposed model for evaluating the manufacturability.     

Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.     

Development of alternative technical systems

This paper considers the integration of alternative technical systems (TS) belonging to a wider class of competing TS, into a supersystem. The paper introduces the notion of alternative TS, shows the peculiarities of their incorporation into a supersystem, reveals the mechanisms used for such incorporation, and shows areas of application for the suggested method.     

连铸钢坯质量的原位统计分布分析研究

采用原位统计分布分析技术得到与样品原位置相对应的数以万计原始信号并对其进行系统解析，实现不同质量连铸钢坯试样的疏松度、均匀度以及夹杂物含量的定量表征。准确计算了连铸钢坯试样疏松度、碳元素的最大偏析度。提出铸坯各原位置成分含量的权重比率方法用以表征材料的均匀度，并提供了统计分布允许差范围内（C0±R）所占权重比率以及权重比率为95%置信度时，中位值置信扩展率（K）等2种判断模式。该方法以测量信息的原始性、原位性及统计性为特征，反映了连铸钢坯较大尺度范围内各化学组成及其形态的定量统计分布规律。采用上述方法可以     

区域可持续发展决策支持模拟系统研究

本文先给出区域可持续发展指标体系；讨论了区域可持续发展决策支持模拟系统及其组成部分，给出区域可持续发展决策支持模拟系统的总体构架，数据库、模型库管理系统及其设计。最后以广州市为例，给出可持续发展决策支持模拟系统的使用效果。     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。