棉织物手感值的模糊综合评判研究

利用模糊综合评判数学模型对棉织物的手感值进行了计算与分析，这种方法简单、可靠，与主观评估结果有很好的一致性，为纺织生产的质量判断提供了便利。     

Identification of the minimum effective dose for right-censored survival data

In this paper, we consider identifying the minimum effective dose (MED) in a dose-response study when survival data are subject to random right-censorship, where the MED is defined to be the smallest dose level under study that has survival advantage over the zero-dose control. To this end, we suggest single-step-down testing procedures based on three different types of weighted logrank statistics, respectively. The comparative results of a Monte Carlo error rate and power/bias study for a variety of survival and censoring distributions are then presented and discussed. The application of the testing procedures for identifying the MED is finally illustrated by using a numerical example of prostate cancer data.     

抽水蓄能机组PSS参数设计与现场试验

围绕广东电网的暂态稳定问题进行了广东电网主要运行方式下的动稳定分析计算,得出抽水蓄能机组的机电振荡频率及其阻尼情况。根据广东电网和南方电网的振荡频率落在0．3～2．0 Hz的低频段上的特点,并结合蓄能电厂机组的参数与特性,经BPA潮流、稳定计算程序和小扰动动态稳定分析程序计算分析比较,对蓄能机组的PSS参数进行了初步设计。通过现场试验对抽水蓄能机组的PSS参数进行优化整定,检验PSS的性能以及在工况调整和转换过程中的适应能力。     

俄罗斯减速器涡轮钻具驱动PDC钻头在西西伯利亚油田的成功应用

涡轮钻具由前苏联研制出来以后，得到了迅速发展，目前已发展到减速器涡轮钻具阶段。现在，俄罗斯西西伯利亚地区普遍使用减速器涡轮钻具钻井，而减速器涡轮钻具驱动PDC钻头的使用还是空白。采用俄罗斯生产的几种不同型号的减速器涡轮钻具，在西西伯利亚进行了驱动PDC钻头钻井的阶段性试验。试验结果表明，在优选PDC钻头结构的情况下，用减速器涡轮钻具驱动PDC钻头，钻头进尺和机械钻速都较牙轮钻头有显著的提高，经济和社会效益显著。介绍了试验中使用的3种俄罗斯减速器涡轮钻具(TPM-195，TPⅢ-195和TPO3—195)的结构特点和主要技术参数。     

铁路桥梁横向振动模拟及适应快速行车结构型式的研究

针对铁路提速后出现的上承式简支钢板梁桥跨中横向振幅过大的问题,以羊楼司桥(L=32m单跨上承式简支钢板梁桥)为例进行实桥检测和数值模拟,建立车辆、线路、桥梁三者的联合模型,考虑轮轨接触力,应用MSC/DYTRAN大型结构分析程序进行车线桥动力相互作用的仿真分析。研究揭示我国用量最多的C62型货车以70∽80km/h的速度空载通过时,该跨度的钢板梁桥发生横向谐振的机理。此外,用该方法对32m跨长的组合梁结构进行桥梁动力特性及列车走行性分析,表明该结构满足提速货车和高速电动旅客列车走行的要求。研究结果对我国高速铁路桥梁建设和既有桥梁的改造具有积极意义。     

Modeling for local dynamic behaviors of phenol biodegradation in bubble columns

A coupled three-dimensional (3-D) model, combining hydrodynamics with biochemical reactions, was developed to simulate the local transient flow patterns and the dynamic behaviors of cell growth and phenol biodegradation by yeast Candida tropicalis in the bubble-column bioreactor, using the computational fluid dynamic (CFD) method. In order to validate this proposed model effectively, the validation of the local hydrodynamic characteristics of the gas-mineral salt solution (gas-liquid) two-phase system, with the phenol concentration of 1200 mg/L, and with the absence of cells, was performed in a square-sectioned bubble column bioreactor using the LDA system and conductivity probe. Furthermore, the validation of phenol biodegradation behaviors by yeast Candida tropicalis at different initial concentrations of phenol and cell was also carried out in the above bubble-column bioreactor. The results indicated that the model simulations had a satisfying agreement with the experimental data. Finally, the local instantaneous flow and phenol biodegradation features including gas holdup, gas velocity, liquid velocity, cell concentration and phenol concentration inside the bioreactor were successfully predicted in different-scale bubble columns by the proposed model. © 2006 American Institute of Chemical Engineers AIChE J, 2006     

SPW中自定义模块的创建与测试

SPW是一个先进的通信系统建模、仿真工具，它具有丰富的通信仿真模块和非常灵活的创建自定义模块功能。通过创建一个简单的自定义模块并对其进行功能测试，介绍了在SPW中创建及测试用户自定义模块的方法。这一实例表明，在SPW中可以将现成的模块与用户自定义模块有机结合在一起，从而大大提高了工程人员的工作效率，同时又扩展了SPW的应用领域。     

山西沁南煤层气井试气工艺分析

对山西沁南地区三口煤层气井试气施工工艺进行总结分析，改进了注入压降测试管柱，采用电潜泵法对煤层排采测气。对今后煤层气井的施工具有一定的指导意义。     

A new stereological principle for test lines in three-dimensional space

A new principle is presented to generate isotropic uniform random (IUR) test lines hitting a geometric structure in three-dimensional space (3D). The principle therefore concerns the estimation of surface area, volume, membrane thickness, etc., of arbitrary structures with piecewise smooth boundary. The principle states that a point-sampled test line on an isotropic plane through a fixed point in 3D is effectively an invariant test line in 3D. Particular attention is devoted to the stereology of particles, where an alternative to the surfactor method is obtained to estimate surface area. An interesting case arises when the particle is convex. The methods are illustrated with synthetic examples.     

高压射流冲击破碎岩石的有限元计算

高压射流冲击破岩是一个复杂的非线性问题。通过MSC．Marc建立模型，分别使用动态接触作为非线性冲击载荷模拟高压水射流冲击岩石。通过动力计算分析，根据岩石内部应力的变化使用Hoffman失效准则研究了岩石的破碎过程。分析表明，增加射流冲击速度可以提高射流破碎岩石的效率，当射流速度迭到某一临界值时，射流水锤作用使得岩石发生大块破碎。