汽车用焊接钢管的发展

介绍了汽车用焊接钢和产品品种，国内皮类管的生产现状及市场需求状况；国外汽车用焊管最新发展情况。建议国内汽车用焊管应该是定点供料，定点生产，设备配套，完善工艺，建立从炼钢，轧制到制管的质量管理体制。     

石油企业办社会的“悖理行为”辨疑

企业办社会虽与市场经济的客观要求相悖，但石油企业大量办社会的事实仍揭示了所具备的理性面。认为国家作为不受所有者监督的代理者对石油企业的要求，石油企业的行业特性以及在传统体制下长期运作所成的定热是石油企业办社会的主要原因。     

3D Motion Estimation and Motion Fusion by Affine Region Matching

In this paper,a new method is presented for 3D motion estimation by image region correspondences using stereo cameras.Under the weak perspectivity assumption.we first employ the moment tensor theory (Cyganski and Orr^[11]) to compute the monocular affine transformations relating images taken by the same camera at different time instants and the binocular affine transformations relating images taken by different cameras at the same time instant.We then show that 3D motion can be recovered from these 2D transformations.A space-time fusion strategy is proposed to aim at robust results.No knowledge of point correspondences if requred in the above processes and the computations involved are linear.To find corresponding image regions,new affine invariants,which show stronger invariance,are derived in term of tensor contraction theory.Experiments on real motion images are conducted to verify the proposed method.     

非线性系统鲁棒吸引的动态补偿方法

考虑非线性不确定系统的鲁棒吸引问题,借助于动态输出反馈,构造了两类控制律。这两类控制律分别可使相应的闭环系统被一任意小的区域鲁棒吸引,或被一预先设置的区域有限吸引。     

Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

锚网支护在综采工作面开切眼中的应用

介绍了平煤集团一矿在戊8— 310 40综合机械化采煤工作面开切眼实施煤巷锚网支护的基本情况。总结了经验 ,为同类条件下的锚网支护设计提供了依据。     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。     

A bidding decision index for construction contractors

Results from applying the model on a sample of contractors, the majority of whom were international and operating in Egypt, reinforces the credibility of the developed methodology, claim the authors.     

废钢在电炉中的高效熔化技术的发展

随着电炉炼钢技术的发展，电炉已成为一种高效的废钢熔化设备，本文从利用初级燃料及电炉废气能的观点出发，对强化电炉冶炼的措施进行了讨论．