Prediction of venturi scrubber efficiency used in an updraft gasifier cleaning train

The performance of a venturi scrubber in the removal of tar from gas in updraft gasification has been studied. The gasifier has been operated with a husk feed rate of 1.6 × 10^?4 kg/s. The venturi scrubber has been operated at a superficial gas velocity of 56.4 m/s at the throat. A wide variety of scrubbing liquids having surface tensions ranging from 0.026 to 0.072 N/m have been used. The Q_g/Q_l, has been varied in the range of 1000–8000. The tar separation efficiency η has been found to vary from 51 to 98.5%. A mathematical model, assuming steady-state operation, has been developed considering very high pseudosolubility of tar in the scrubbing liquids. The predicted values of η have been compared with experimental results. The model satisfactorily explains the tar removal efficiency of the venturi for Q_g/Q_l values ranging from 4000 to 8000 for all scrubbing liquids. The following correlation has been developed for predicting venturi scrubber efficiency: .     

静脉产业园餐厨垃圾处理厂与焚烧厂协同处理运行实例和经济性分析

以广西某静脉产业园内餐厨垃圾处理厂为例,介绍了以"预处理+油脂提取+厌氧发酵+沼气净化利用"为主体的餐厨垃圾处理工艺,并对该厂与生活垃圾焚烧厂协同处理进行了经济性分析。结果表明,与餐厨厂独立运营相比,与焚烧厂协同处理年节省成本达94.83万元。     

不同基质配比对银毛野牡丹扦插的影响

银毛野牡丹是优良的园林观赏性植物,但是繁殖有性结实率低。通过为期30天的扦插试验,对比不同基质（原土、草炭土、蛭石、珍珠岩）配比对银毛野牡丹插穗生长的影响,分析插穗生根时间、生根数目、最长根长、生根率、生长状态以及基质变化,找出适合其生长发育的优良基质,为银毛野牡丹的繁殖提供技术支撑。研究表明：试验组T8（原土：细沙：草炭土：蛭石：珍珠岩=1：1：2：1：1）的插穗生根率、最长根长、插穗长势为最佳,试验组T2（草炭土）效果次之,在条件有限的情况下可以作为备用方案以供生产所需。     

Structural Investigation and Molecular Modeling Studies of Strobilurin-Based Fungicides Active against the Rice Blast Pathogen Pyricularia oryzae

The increasing emergence of fungicide-resistant pathogens requires urgent solutions for crop disease management. Here, we describe a structural investigation of new fungicides obtained by combining strobilurin and succinate dehydrogenase inhibitor pharmacophores. We identified compounds endowed with very good activity against wild-type Pyricularia oryzae, combined in some cases with promising activity against strobilurin-resistant strains. The first three-dimensional model of P. oryzae cytochrome bc1 complex containing azoxystrobin as a ligand was developed. The model was validated with a set of commercially available strobilurins, and it well explains both the resistance mechanism to strobilurins mediated by the mutation G143A and the activity of metyltetraprole against strobilurin-resistant strains. The obtained results shed light on the key recognition determinants of strobilurin-like derivatives in the cytochrome bc1 active site and will guide the further rational design of new fungicides able to overcome resistance caused by G143A mutation in the rice blast pathogen.     

Formation of Proto-Kranz in C3 Rice Induced by Spike-Stalk Injection Method

Introduction of C4 photosynthetic traits into C3 crops is an important strategy for improving photosynthetic capacity and productivity. Here, we report the research results of a variant line of sorghum–rice (SR) plant with big panicle and high spikelet density by introducing sorghum genome DNA into rice by spike-stalk injection. The whole-genome resequencing showed that a few sorghum genes could be integrated into the rice genome. Gene expression was confirmed for two C4 photosynthetic enzymes containing pyruvate, orthophosphate dikinase and phosphoenolpyruvate carboxykinase. Exogenous sorghum DNA integration induced a series of key traits associated with the C4 pathway called “proto-Kranz” anatomy, including leaf thickness, bundle sheath number and size, and chloroplast size in bundle sheath cells. Significantly, transgenic plants exhibited enhanced photosynthetic capacity resulting from both photosynthetic CO₂-concentrating effect and improved energy balance, which led to an increase in carbohydrate levels and productivity. Furthermore, such rice plant exhibited delayed leaf senescence. In summary, this study provides a proof for the feasibility of inducing the transition from C3 leaf anatomy to proto-Kranz by spike-stalk injection to achieve efficient photosynthesis and increase productivity.     

Genome-Wide Analysis Identified a Set of Conserved lncRNAs Associated with Domestication-Related Traits in Rice

Crop domestication, which gives rise to a number of desirable agronomic traits, represents a typical model system of plant evolution. Numerous genomic evidence has proven that noncoding RNAs such as microRNAs and phasiRNAs, as well as protein-coding genes, are selected during crop domestication. However, limited data shows plant long noncoding RNAs (lncRNAs) are also involved in this biological process. In this study, we performed strand-specific RNA sequencing of cultivated rice Oryza sativa ssp. japonica and O. sativa ssp. indica, and their wild progenitor O. rufipogon. We identified a total of 8528 lncRNAs, including 4072 lncRNAs in O. rufipogon, 2091 lncRNAs in japonica rice, and 2365 lncRNAs in indica rice. The lncRNAs expressed in wild rice were revealed to be shorter in length and had fewer exon numbers when compared with lncRNAs from cultivated rice. We also identified a number of conserved lncRNAs in the wild and cultivated rice. The functional study demonstrated that several of these conserved lncRNAs are associated with domestication-related traits in rice. Our findings revealed the feature and conservation of lncRNAs during rice domestication and will further promote functional studies of lncRNAs in rice.     

A replacement of traditional insulation refractory brick by a waste-derived lightweight refractory castable

Lightweight insulation refractories are essential for high-temperature performance to reduce energy consumption. This study investigates a new insulation material, that is, solid waste rice husk ash (RHA) derived lightweight refractory castable, replacing traditional insulation refractory brick. The RHA is generated after the burning of rice husk as biomass fuel. The RHA is used as an aggregate and alkali-extracted silica sol from RHA as a binder to fabricate the insulation castable. The nanosilica containing (~30 wt%) sol is employed to synthesize the refractory castable by varying the sol amount (2.5-12.5 wt% silica from sol). The castable specimens are cast by a vibro-caster and fired at 900-1200°C in a muffle furnace. The physic-mechanical and thermal conductivity (κ) of the castable is investigated. At 1100°C with 10 wt% dry sol retaining sample shows an excellent apparent porosity (~65%), low bulk density (~ 0.8 g/cm³), and κ (0.136 W/m k) with sustainable compressive strength (6 MPa). The acquired results are a good match with the literature (other wastes-derived insulation materials) and industrial (silica insulation brick) obtained data. These promising outcomes may inspire the refractory industries for using RHA as an aggregate and RHA extracted sol as a binder for making insulation castable.     

Crude Wax Extracted from Rice Bran Oil Improves Oleogel Properties and Oxidative Stability

Crude wax extracted from rice bran oil (RBO) is used to improve the oleogel properties and oxidative stability of RBO. The effect of crude rice bran wax (CrBW) on the formation characteristics and oxidative stability of oleogels is discussed. The results show that oleogels can be formed with 7.0 wt% CrBW at 20 °C. As the concentration of CrBW increases from 7.0 to 11.0 wt%, the hardness and solid fat content (SFC) of the oleogels increase significantly, and the oleogels are primarily β' crystals. Moreover, oleogel crystals formed with 5 and 7 wt% CrBW are flocculent; when the amount included is 9%, the oleogel crystals are transformed into long dendrites, and the density rises. After 90 days of storage at 20 °C, the peroxide value of oleogels formed with 9.0 wt% CrBW slowly rises from 3.21 to 6.52 mmol kg⁻¹. Practical Applications: Oleogels prepared here by CrBW and RBO are an innovative structural lipid without trans fats. Useful information on the rich fats and nutrients in CrBW is provided, which reduces the production cost and improves the industrial production capacity.     

燃气轮机余热发电系统方案选择

综合利用不同型号燃气轮机余热的发电系统,根据水泥厂自备电站的不同型号燃气轮机余热情况,拟定余热发电技术方案,分析比较不同方案下余热发电系统的技术指标,从而选择合理的技术方案。     

中亚国家电解铝厂总图布置的特点

通过对中亚国家电解铝厂的设计,并与国内同类项目进行比较,指出因社会、自然环境、人文环境和管理体制的不同,而致使总图设计方案有较大的差异,针对这些差异,提出了改进的措施及应注意的问题,可供国内同行参考。