关于松辽盆地内部地体碰撞的探讨

通过对地震资料中特殊现象的解释提出了松辽盆地内部东西地体碰撞的看法,合理地解释了松辽盆地滨北地区地质现象的形成机制,并且认为地体碰撞带可能是无机生油的有利场所。     

Effects of crack size and weld metal mismatch on the has cleavage toughness of wide plates

The heat affect zone (HAZ) is in many cases considered to be the most critical part of a weldment. In this paper, the effect of crack size and weld metal mismatch on the HAZ cleavage toughness of wide plate specimens with X-groove has been investigated by the J-Q-M theories and a simple micromechanism for cleavage fracture. Two crack sizes have been studied (a/w = 0.1 and 0.3). In the analyses, the HAZ yield strength is assumed to be higher than the base metal. For each crack size, weld metal local overmatch and local evenmatch with respect to the HAZ are considered. For a given global strain, the results indicate that weld metal overmatch and evenmatch yield the same crack tip loading in terms of J-integral for a/w = 0.3. For a/w = 0.1, overmatch gives lower crack tip loading than evenmatch. For a given crack tip loading, weld metal local evenmatch in general results in less effective crack tip loading than the overmatch. Overmatch is detrimental to HAZ toughness, but this detrimental effect becomes less significant when the crack size decreases.     

石灰竖窑工作衬砖蚀损机理的探讨

阐述了石灰竖窑的预热带、煅烧带和冷却带工作衬砖蚀损机理，并讨论了如何根据耐火砖性能和石灰竖窑不同区域的蚀损机理，选择耐火材料。     

超高纯铜的制备方法和应用

简要介绍了超高纯铜(UHPC)的几种精炼方法，以及它在工业方面的应用。并对超高纯铜的研究开发趋势及应用前景进行了展望。     

提高特高含水期油藏采收率的方法及应用效果

针对胜索油田二区9-10单元的层间非均质和平面非均质性，运用水动力学方法，采用周期注水及增压注水改善单元的水驱油效果。经过6a的实施，单元的开发形势趋好，单元采收率提高9.62%，增加可采储量341.5kt，对同类型非均质性油藏改善水驱油效果，提高最终采收率具有借鉴意义。     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

Differentiation between epigeic and hypogeic fauna in gravel streams

The ‘hyporheic zone’ is described. According to the classical definition, water below the sediment surface is groundwater and the hyporheic interstitial zone is part of the phreatic system. This ignores the vertical distribution of the epigeic benthic fauna. The uppermost layer of the sediment (bed sediments) of the hyporheic zone is dominated by epigeic faunal elements and is therefore part of the surface system. In contrast to hypogeic species, the depth penetration of epigeic species is limited. Possible explanations are discussed.     

改进的FD—TD法分析二维理想导体TM近区散射问题

本文针对一般ＦＤ－ＴＤ方法分析计算二维理想导体散射问题所遇到散射体边角处难以精确处理的缺点进行了改进。将边角处总场近似解析解直接引入ＦＤ－ＴＤ法差分公式，得到了有关修正系数，为了检验此方法的有效性，有无限长导体方柱为例分别用一般ＦＤ－ＴＤ法和本文的ＦＤ－ＴＤ方法进行了分析研究，并与ＭＯＭ法进行了比较，所得结果说明改进后的ＦＤ－ＴＤ方法对分析计算导体边角附近电流分布特性是较有效的。     

Microstructural transformations of heat affected zones in duplex steel welded joints

The influence of the welding thermal conditions exemplified by heat input and heat treatment after welding on the structure of the heat affected zone (HAZ) UNS S31803 has been analysed. The post weld treatment was used to create the precisely defined thermal conditions for the decomposition of primary phases in the HAZ, by a multi-layer welding thermal cycle stimulation. Detailed analyses of the microstructure and chemical composition of the phases in the different post welded conditions were performed by scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS) and transmission electron microscopy (TEM). Three types of secondary precipitates have been observed: secondary austenite (γ₂), carbides: M₂₃C₆ and M₇C₃. The dependence of the secondary austenite volume fraction and morphology in the HAZ on thermal cycle have been interpreted. The eutectoid decomposition of the primary phases in the analysed thermal conditions was confirmed.