基于鲸鱼算法改进小波神经网络的GIS局部放电诊断方法研究

针对封闭式气体绝缘开关装置由于生产、运输安装和运行环境等因素,引发的局部放电现象而造成的绝缘故障问题,提出了一种基于改进鲸鱼算法与小波神经网络结合的封闭式气体绝缘开关装置局部放电诊断方法。该方法利用灰度图谱与矩特征实现对局部放电信号的特征提取,基于矩特征值构建小波神经网络的输入样本集;然后使用改进鲸鱼算法对小波神经网络参数进行寻优,以解决神经网络存在的参数敏感问题;最后将优化好且训练完成的小波神经网络应用于绝缘开关装置局部放电诊断中。改进鲸鱼算法引入非线性收敛因子与自适应思想提升了算法的性能,对小波神经网络的超参数有较好的寻优效果。仿真结果表明,相比于通用参数配置的小波神经网络,改进诊断方法诊断精度提升了9.45%。     

基于RD26的双通道旋转变压器位置解码设备的设计

双通道旋转变压器的解码问题一直是伺服控制闭环系统非常重要的一个问题,快速、准确的解码出伺服系统位置信息是闭环控制系统的关键。通过对某伺服系统闭环控制系统位置解码技术的研究,分析了RD26的解码过程及原理,设计一种基于RD26的双通道旋转变压器位置解码设备,此设备将双通道旋转变压器输出的信号与RD26相连,通过并口向FPGA发送数据,FPGA通过时序读取RD26信号,能将双通道旋转变压器粗机、精机的模拟电压信号转换成具有绝对位置的数字信号,不需要再进行纠错与粗精结合,解码精度可达到±2角分+1LSB。     

Real time flood disaster monitoring based on energy efficient ensemble clustering mechanism in wireless sensor network

In this article, energy efficient ensemble clustering method (EECM) with black widow optimization (EECM-BWO) algorithm is proposed for effective data transmission with the help of real time flood disaster monitoring wireless sensor network (WSN). Initially, unified scalable ensemble clustering algorithm based on ensemble generation and consensus function is proposed for selecting the optimal routing path among the node using BWO algorithm. Then, biologically inspired routing black widow spiders optimization algorithm is proposed to trade off the nodes energy level, self-organization, and self-configuration in the WSN. The simulation is performed using NS2 simulator for validating the performance of the proposed EECM-BWO method. Here, in node, low delay achieves 24.07%, 72.58%, 51.36%, 81.75%, 77.74%, high packet delivery ratio achieves 70.83%, 53.93%, 90.23%, 43.58%, 24.58%, low packet drop attains 77.93%, 72.76%, 61.56%, 51.87%, 34.35%, low energy consumption attains 75.9%, 52.94%, 65.81%, 58%, 41.2% compared with existing energy-efficient clustering approach consolidated game theory as well as dual-cluster-head mode for WSNs energy-aware clustering by cuckoo optimization approach (EECM-COA), energy-aware clustering-based routing using multi-path reliable transmission with routing and control board (EECM-RCB-MRT), adaptive repair algorithm with temporally ordered routing algorithms for flood control strategy (EECM-AR-TORA-FCS), passive multi-hop clustering algorithm (EECM-PMC), dynamic source routing protocol based on genetic algorithm-bacterial foraging optimization (DSR-GA-BFO).     

The price of anarchy in closed-loop supply chains

This paper measures the worst-case efficiency of price-only contracts in closed-loop supply chains (CLSCs) with the price of anarchy (PoA). We model a single-period Stackelberg game in which a manufacturer sells new products to a retailer and collects used products with exogenous retail price and collection price via three alternative reverse channels: (a) the manufacturer collects directly from customers, (b) the retailer collects for the manufacturer, and (c) a third party is awarded a collection subcontract from the manufacturer. We carry out a comprehensive investigation under push–pull configurations to observe how reverse channel structures with different gaming sequences of CLSC members influence the worst-case performance when the demand distribution is over the set of increasing generalized failure rate distributions. From our PoA analysis, we find that the pull system does not always outperform the push system, especially when the retailer is the leader, in contrast to the results for forward supply chains. While the PoA of the push system is dramatically sensitive to the quality condition of used products, the pull system has a constant efficiency loss that is independent of the quality condition. Instead, the PoA of the pull system solely changes with the gaming sequence of the manufacturer. We also find that manufacturer's direct collection is a better reverse channel choice compared to retailer's collection. Additional managerial insights are summarized for discussion.     

基于多流网络一致性的视频显著性检测

现有的视频显著性检测算法通常采用双流结构提取视频的时空线索,其中运动信息作为双流结构的一个分支,在显著物体发生剧烈或慢速移动时存在运动估计准确率低的问题,并且不合理的训练数据或方案使得权重偏向单个分支结构。提出一种基于多流网络一致性的视频显著性检测算法MSNC。设计并使用一种新的三重网络结构提取预选目标区域的颜色信息、时序信息和先验特征,通过先验特征补偿运动流的缺陷,并提高运动线索的利用率。采用多流一致性融合模型优化三流分支,得到不同特征的最佳融合方案。同时通过循环训练策略平衡三重网络的权重,以避免网络过度拟合单流分支,从而有效地提高运动估计和定位的准确率。在Davis数据集上的实验结果表明,相比PCSA、SSAV、MGA等算法,该算法的鲁棒性更优,其maxF和S-Measure值分别达到0.893和0.912,MAE仅为0.021。     

基于多通道脑电信号的因果网络情绪识别

情绪是由大脑内多个通道共同作用产生的,格兰杰因果检验作为情绪识别的主流方法,在计算任意2个通道之间的因果关系时容易忽略其他通道的影响。面向多通道脑电信号,提出一种基于条件格兰杰因果检验（CGC）的因果网络情绪识别方法。利用CGC算法计算不同情绪下大脑全通道的因果关系,据此构建因果网络,并通过分析各通道的入/出度和介数拓扑属性找到关键通道,得到简化的因果网络进行情绪识别。将节点之间的因果连接关系作为特征分别输入SVM和KNN分类器进行分类训练,实验结果表明,简化网络的识别率分别为75.3%和78.4%,验证了所提方法的有效性。     

基于CvM算法的Nakagami衰落信道统计特性检验

Nakagami信道通过不同的衰落因子m可以仿真不同的信道衰落环境,仿真数据与实际测量值吻合度较高,在信道仿真领域得到广泛应用。然而,目前针对Nakagami信道模型的可信性研究较少,缺少科学的比对验证方法。根据典型Nakagami信道的一阶包络序列服从Nakagami分布这一信道统计特性,提出一种基于Cramer-von Mises （CvM）算法的拟合优度检验方法。使用“高斯+瑞利+直流”组合法建立Nakagami衰落信道模型,得到信道输出序列并从中提取包络序列。在此基础上,利用双样本CvM检验算法对包络序列的理论分布和实际分布进行拟合优度检验,实现对Nakagami信道模型的可信性评估。半实物仿真结果表明,与K-S检验、卡方检验和Z检验+卡方检验融合检验算法相比,CvM针对不同m下的Nakagami衰落信道均具有较好的识别性能,同时在可靠性和复杂度方面也具有优势,其对虚警概率为0.01以下的Nakagami衰落信道识别准确率达到92.6%,对样本长度为300 000以上的Nakagami衰落信道平均识别准确率达到96.4%,而当待检验信道为其他信道时,不存在误识别的情况。     

尖端导体电晕放电试验研究

电晕放电是高压电力工程及航空航天领域研究的重点及难点问题;为研究尖端导体电晕放电的辐射特点,设计了电晕放电试验模拟系统;利用测试系统及天线在微波暗室内进行了不同测试距离、不同放电电压及不同尖端导体长度条件下的试验;通过对试验数据的分析可知,电晕放电辐射信号呈衰减振荡模式;电晕放电脉冲重复率随着充电电压的增大而增加;天线接收的辐射信号能量与测试距离成反比;随着充电电压的增加,信号辐射功率呈增加趋势;试验研究结果为输变电工程、航空航天装备的电磁环境分析提供参考。     

电力线信道模型下OFDM通信系统的Simulink仿真研究

电力线通信技术是具有良好发展前景的一种宽带接入方式,但是噪声干扰严重,通信环境恶劣,正交频分复用是解决电力线通信问题的有效方法。文章运用Simulink建立了基于时间流的电力线通信信道模型和OFDM基带通信模型。通过对电力线信道模型下的采用OFDM的通信系统模型进行仿真验证,结果表明可以通过适当的编码和调制方式来提高系统的可靠性,并定性地分析了编码和误码率、调制方式和误码率之间的关系。     

Fractional Fourier transform based transmitted reference scheme for UWB communications

In this paper,we propose a receiving system for impulse radio ultra-wideband (IR-UWB) communications,in which the data and reference pulses are combined as one signal to transmit,and the received signal can be divided into the data and reference pulses in the receiver end using the energy concentration property of Chirp pulses in fractional Fourier transform (FrFT) domain.A detailed theoretical analysis of the proposed system is given,and the formulation of bit error rate (BER) is obtained.Then according to...