闽南红砖在现代室内空间中的表征与应用

从泉州所用闽南红砖的地方性表征与建筑的在地文化,浅谈红砖文化在室内空间设计中的可创造性和可复制性.文章从室内运用现状和材料特性方面探讨闽南红砖材质与尺寸在室内空间设计中的构成法则.     

黄兴与陈其美的离合及其历史影响

黄兴与陈其美都是辛亥革命时代的风云人物,他们两人的关系经历了从密切合作到分道扬镳的演变过程,这种离合关系的演变在辛亥革命史、中华民国史上产生了重大的影响,黄兴生前的成败乃至身后的荣辱都与陈其美的离合有着密不可分的关系。分三大部分即辛亥革命前后黄兴与陈其美的密切合作;宋案后黄兴与陈其美因政见分歧而分道扬镳;蒋介石崛起后将黄兴树为不服从领袖的反面典型,贬低黄兴的历史地位,其恶劣影响至今尚未完全消除进行分析研究。     

钢管混凝土中核心混凝土本构关系的确定

本文通过对混凝土单向受压及三向受压本构关系的讨论,考虑到钢管混凝土中核心混凝土的实际工作性能,提出了核心混凝土的本构关系。此本构方程与钢管混凝土中的独立参数和综合参数有关。     

The influence of some new 2,5-disubstituted 1,3,4-thiadiazoles on the corrosion behaviour of mild steel in 1 M HCl solution: AC impedance study and theoretical approach

The new 2,5-disubstituted 1,3,4-thiadiazoles were investigated as corrosion inhibitors of mild steel in 1 M HCl using AC impedance technique. Four of these compounds exhibit good inhibition properties, while two of them, 2,5-bis(4-nitrophenyl)-1,3,4-thiadiazole and 2,5-bis(4-chlorophenyl)-1,3,4-thiadiazole, stimulate the corrosion process especially at low concentrations. The experimental data obtained from this method show a frequency distribution and therefore a modelling element with frequency dispersion behaviour, a constant phase element (CPE) has been used. Possible correlations between experimental inhibition efficiencies and quantum chemical parameters such as dipole moment (μ), highest occupied (E_HOMO) and lowest unoccupied (E_LUMO) molecular orbitals were investigated. The models of the inhibitors were optimised with the Density Functional Theory formalism (DFT) using hybrid B3LYP/6-31G (2d,2p) as a higher level of theory. The Quantitative Structure Activity Relationship (QSAR) approach has been used and composite index of some quantum chemical parameters were constructed in order to characterize the inhibition performance of the tested molecules.     

Effect of FA chain length on normal- and reversed-phase HPLC of phospholipids

Forty-seven saturated synthetic diacyl PA, PC, PE, PG, and PS and five unsaturated diacyl phospholipids (PL) underwent normal- and reversed-phase (RP) HPLC with isocratic isopropanol/hexane/water (5∶4∶1) and methanol/chloroform/acetonitrile/water (79.5∶9∶8∶3.5) mobile phases, respectively. For normal-phase HPLC, capacity factors (k′ _i ) decrease with chain length (n) of the two identical PL FA residues, whereas the opposite occurs with RP (C₁₈)-HPLC. Plots of In k′ _i vs. n for individual PL classes are in general curved, violating the linear free-energy relationship. For PL of the same n but with different head groups, k′ _i with normal-phase HPLC varies as PE<PG<PA<PS<PC, except when n≥16, when the order is PE<PS≈PA≈PG<PC. For RP-HPLC, the order of k′ _i values is PG<_A≈PS≤PC≈PE until n≥16, when it is PA≈PG<PS≪PC≈PE. With normal-phase HPLC, k′ _i values of PL with unsaturated FA of n=18 are ordered as PE<PA<PC. Increasing degrees of unsaturation lead to increasing k′ _i .     

Copolyimides from 2,3,3′,4′-biphenyltetracarboxylic dianhydride and pyromellitic dianhydride with 4,4′-oxydianiline

A series of copolyimides were prepared via the polyamide acids (polyamic acids) from the reaction of 2,3,3′,4′-biphenyltetracarboxylic dianhydride (a-BPDA) and pyromellitic dianhydride (PMDA) with 4,4′-oxydianiline (4,4′-ODA) at dianhydride molar ratios of 9:1, 7:3, 1:1, 3:7 and 1:9. Homopolymers and a 1:1 polymer blend were also prepared. Films from the 7:3, 1:1 and 3:7 molar ratio polyamide acids reacted for 5-6 h at ambient temperature were brittle, whereas films from the same polyamide acids reacted for 24-48 h at ambient temperature were fingernail creaseable. The difference was apparently due to the initial formation of incompatible block domains that underway randomization upon longer reaction time. The differential scanning calorimetric (DSC) curves of some of the brittle films quenched after heating to 400 °C had two apparent glass transition temperatures (T_gs), indicative of two block domains. The creaseable films quenched after heating to 400 °C had single T_gs. Wide-angle X-ray diffraction showed all films to be amorphous even though the initial DSC curves showed strong endothermic peaks, generally associated with crystalline melts. These strong endotherms near the T_g region were thought to be due to relaxation of regions in the highly stressed films. Films of copolyamide acids from the reaction of 1:1 molar ratios of 3,3′,4,4′-oxydiphthalic anhydride/a-BPDA and 3,3′,4,4′-biphenyltetracarboxylic dianhydride/a-BPDA with 4,4′-ODA reacted for 6 h were fingernail creaseable. The chemistry and the properties of the copolymers are compared with those of the homopolymers.     

Investigation of Polyimidesiloxanes for Use as Adhesives by Electron Spectroscopy for Chemical Analysis

Angle-dependent electron spectroscopy for chemical analysis (ESCA) was used to examine the air facing surface (20–100 Å thick) composition of polyimidesiloxanes with different processing variations, and of varying polydimethylsiloxane (PDMS) content and block length (number of PDMS repeat unit varies from 1 to 9). Polyimide was clearly detected (due to the nitrogen content) in the 20–100 Å surface regions. This shows that a small amount of PDMS and short PDMS segment lengths in polyimidesiloxanes give a surface region with both PDMS and polyimide present. The surface composition, particularly that in the ca. 100 Å region, was correlated to the peel strength of polyimidesiloxane melt pressed to a metal substrate. Our results suggest that both PDMS and polyimide are essential components to rendering a needed peel strength. PDMS, having a good diffusive ability, readily reaches the substrate upon being pressed, achieving intimate contact, while imide groups interact with the substrate, presumably through chemical bonding; these two factors act synergistically to result in a high peel strength. In addition, the interaction mechanism and the failure mechanism involved in bonding polyimidesiloxane and metal substrate were also elucidated based on the ESCA results.     

Effect of N-substituents on performance of thiourea collectors by density functional theory calculations

Using density functional methods, some properties were studied such as the energies and compositions of frontier molecular orbitals and the atomic charges, which are related to the reactive behavior of thioureas containing different N-substituent groupings. The calculation results indicate that the N-substituent groupings have significant effect on the flotation performance of thiourea collectors. The order of electron-donating ability is N-propyl-N′-benzyl-thiourea (PBZYTU)＞N-propyl-N′-ethyl-thiourea (PETU) ＞N-propyl-N′-allyl-thiourea (PALTU)＞＞ N-propyl-N′-acetyl-thiourea (PACTU) ＞N-propyl-N′-ethoxycarbonyl- thiourea (PECTU) ＞N-propyl-N′-benzoyl-thiourea (PBZOYTU), and the order of feedback-electron-accepting ability is PBZOYTU＞PACTU＞PECTU＞＞ PALTU＞PETU＞PBZYTU. This implies that PBZOYTU, PACTU or PECTU can react with copper atoms having (t2g)6(eg)3Cu(II) or t6e4Cu(I) configuration on the surfaces of copper sulfide minerals through normal covalent bond and back donation covalent bond, and exhibit excellently collecting performance for copper sulfide minerals. These are consistent with the experimental data reported in the literatures.     

楔形砖间尺寸关系研究

为修订国标ＧＢ／Ｔ２９９２ － ８２《通用耐火砖形状尺寸》,研究了我国楔形砖间尺寸关系。     

不同采收期水冬瓜叶的主成分分析及抗炎镇痛谱效关系研究

为筛选水冬瓜叶抗炎镇痛活性成分,采用高效液相色谱(HPLC)建立不同采收期10批次水冬瓜叶药材指纹图谱,对其进行主成分分析,并基于皮尔逊相关分析法探讨不同采收期水冬瓜叶药材抗炎镇痛的谱效关系。结果显示,不同采收期水冬瓜叶药材HPLC指纹图谱中有17个共有峰,10批次药材的相似度为0.875~0.973。聚类分析将不同采收期水冬瓜叶药材分为3类。主成分分析共得到3个主成分。经皮尔逊相关分析,峰17、峰14、峰12、峰15、峰13、峰5、峰16和峰4可能为水冬瓜叶药材镇痛作用的物质基础,峰6、峰8(异槲皮苷)、峰11、峰7(金丝桃苷)、峰5、峰3、峰4、峰13、峰9和峰1可能为水冬瓜叶药材抗炎作用的物质基础。