Correction of color information of a 3D model using a range intensity image

Most active optical range sensors record, simultaneously with the range image, the amount of light reflected at each measured surface location: this information forms what is called a range intensity image, also known as a reflectance image. This paper proposes a method that uses this type of image for the correction of the color information of a textured 3D model. This color information is usually obtained from color images acquired using a digital camera. The lighting condition for the color images are usually not controlled, thus this color information may not be accurate. On the other hand, the illumination condition for the range intensity image is known since it is obtained from a controlled lighting and observation configuration, as required for the purpose of active optical range measurement. The paper describes a method for combining the two sources of information, towards the goal of compensating for a reference range intensity image is first obtained by considering factors such as sensor properties, or distance and relative surface orientation of the measured surface. The color image of the corresponding surface portion is then corrected using this reference range intensity image. A B-spline interpolation technique is applied to reduce the noise of range intensity images. Finally, a method for the estimation of the illumination color is applied to compensate for the light source color. Experiments show the effectiveness of the correction method using range intensity images.     

超高压输电线地面电场的测量、计算及分析

利用电磁辐射分析仪PMM8053B与工频电磁场探头EHP-50C对某地区500 kV超高压输电线路的电场强度进行了实际测量;应用等效电荷法对该地区空旷地带的电场强度进行了模拟计算。通过Matlab软件对比计算结果与实测结果后得出,采用等效电荷法计算电场强度所得结果与实测数据基本一致;建筑物中以及树林下的电场强度远小于空旷地带。     

实时光纤网络中突发数据传输的物理层设计

使用Altera CycloneⅢ FPGA设计了百兆实时光纤网络物理层,解决了百兆光纤网络突发数据通信中的数据突发发送、数据时钟的恢复及接收的关键技术。利用空间过采样技术避开了光通信中用于相位锁定、时钟恢复所需的等待时间,直接从码流中提取数据,从而减少了网络突发数据包的同步码开销,提高了光网络的带宽利用率。     

广告制胜的先决要素——视觉强度

视觉强度是所有诉诸视觉的艺术和设计追求的目的之一。广告是视觉艺术。若要释放这股强劲的潜能,视觉强度是视觉力量的保证。视觉强度,即对于视觉客体来说,是指对视觉主体的刺激或冲击程度;对于视觉主体来说,是指接受视觉对象刺激或冲击的强度,也称视觉感知度。一个人对不同的视觉对象产生不同的视觉感知度,而同一个视觉客体对不同人也可产生不同的冲击或刺激程度。空间与时间的差异也可引起视觉强度的差异。     

基于遥感的长沙市城市热岛效应时空分析

利用TM/ETM+数据,以长沙市为例,反演了地表温度,并针对不同时相的遥感数据,利用城市热岛强度来反映热岛效应强弱的变化。结果表明,长沙市的热岛空间分布与城市建成区的轮廓相吻合。城市热岛的范围随着城市建设、新建开发区以及道路交通网的发展不断增大,且在东南方向为主要增长方向。根据热岛强度鉴别并提取了强热岛区与正常区,发现长沙市强热岛区的面积已经从1993年的13.18km2扩大至2008年的68.16km2。最后,对长沙市热岛未来的发展趋势进行了预测。     

双通道可见光光强计标定实验平台设计

利用双通道检测方法设计了可见光光强计标定实验平台。光源经单片机控制调节产生系列光强值,分束后进入标准信号通道与自制仪器通道,在同步信号下取得不同光强信号的测量值并据此定标。该方法扩大了标定实验平台对光源的选取范围,提高了自制仪器的性能。     

基于光照强度的PIN光电二极管响应时间分析

在PIN光电二极管应用中发现,光照强度对响应速度具有很大影响.论文研究了光强对响应速度的影响,提出了内部PIN结等效电场模型,并搭建了实验电路对PIN光电二极管在不同光照强度下的响应速度进行检测,验证提出的结模型,很好的解释了光电二极管从无光照到有光照这一过程中,光强越强,响应时间越短;而当光电二极管从有光照到无光照这一过程中,光强越强,响应时间越长这一现象.提出的模型和实验验证为光电二极管在响应速度要求较高的系统中的应用提供了理论分析依据,也为进一步提高PIN光电二极管的速度提出了有益的探索.     

无线上行视频流的跨层容错传输方法

如何通过资源受限的移动通信终端提升无线上行视频流的抗误性能是亟待解决的重要问题。通过不同通信层次的联合调度,提出了一种跨层容错传输方案。移动通信终端的网络层代理首先利用容错包调度为视频流的延时约束帧集合提供重要性分类,随后该终端的链路层代理利用无线链路单元的优先级调度实现选择性重传。在调度延时与传输带宽限制下,跨层容错传输能够将突发错误转移到延时约束帧集合的低优先级视频数据中,从而在突发易错传输环境中实现了无线链路单元粒度的渐进式传输和平稳退化。     

Self-similarity of parallel machines

Self-similarity is a property of physical systems that describes how to scale parameters such that dissimilar systems appear to be similar. Computer systems are self-similar if certain ratios of computational forces, also known as computational intensities, are equal. Two machines with different computational power, different network bandwidth and different inter-processor latency behave the same way if they have the same ratios of forces. For the parallel conjugate gradient algorithm studied in this paper, two machines are self-similar if and only if the ratio of one force describing latency effects to another force describing bandwidth effects is the same for both machines. For the two machines studied in this paper, this ratio, which we call the mixing coefficient, is invariant as problem size and processor count change. The two machines have the same mixing coefficient and belong to the same equivalence class.