Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

从实例看花岗岩地基勘察的几个特点

以花岗岩类的硬质岩作为建筑物基础持力层,具有承载力高、稳定性好,抗震性强的特点,被许多重要建筑物所采用,尤其是沿海地区的高层建筑物。但往往此类基岩的层面不够“平整”,基岩层面的变化对基础的设计、施工,尤其是桩基础影响很大。本文通过对某高层建筑进行地基勘察的实例,总结了花岗岩地区风化岩层的几个特征及其在工程勘察中需注意的一些问题。     

水电工程坝基岩体研究现状与发展的思考

以国内部分重点水电工程为例，对我国水电工程建设中坝基岩体质量分类、主要岩石力学参数的选取、大坝建基面的确定及弱风化岩体利用情况进行总结与分析；指出简化的坝基岩体多因子分类、岩体力学参数的提取与岩体质量分类相配套、按等值线提取岩体物理力学参数并动态确定大坝建基面的方法，应是水电工程坝基工程岩体研究的发展趋势。     

柴达木盆地天然气中稀有气体同位素特征

为了确定柴达木盆地勘探新层系，测试并分析了该盆地5个油气田的8个天然气样品的氦、氩同位素比值，探讨了其在大地构造背景、大地热流和气源方面的示踪意义。研究结果如下：①柴达木盆地8个天然气样品³He/⁴He值分布在2.0×10^-8～5.48×10^-8的范围，总体平均为3.7×10^-8，均在10^-8量级，体现了典型的壳源成因氦同位素的特征。②据³He/⁴He计算的大地热流值较低，分布于41.2~48.2 mW/m²之间，平均44.9 mW/m²，低于东部地区大地热流平均值73 mW/m²，表明该盆地具有较稳定的构造背景。③根据天然气⁴⁰Ar/³⁶Ar的年代积累效应，结合烃源岩分布特征推测，柴达木盆地东部凹陷区伊克雅乌汝构造伊深1井天然气应源于上第三系；西部坳陷区尕斯油田尕斯8-6井和尕斯475井天然气应源于下第三系；碱山构造碱1井天然气应源于侏罗系，碱山构造碱2井的天然气应源于上第三系；北缘块断带南八仙油气田仙试1井的天然气应源于侏罗系；南八仙油气田仙试8井和马北构造马北1井的天然气可能主要源于侏罗系。     

轻质油中C1—C7轻烃的地球化学特征

作者对5个盆地18个轻质油样品作了C_1—C_7轻烃分析,检测出29种单体轻烃。通过轻烃组成特征研究,认识到石蜡指数(PI_1)和庚烷值(PI_2)作为成熟度的指标,不受沉积盆地类型影响;C_6,C_7烃类族组分受母质类型影响较大。陆相(含煤地层)有机质生成轻质芳烃(苯)的含量比海相有机质要高。新疆塔里木盆地沙参2井原油的轻烃分析资料表明,该井油源岩为海相沉积。     

Time and Temperature Factors in Construction of Rock Strength Criteria

Using the synthesis of the kinetic concept on solid strength and the Coulomb - Mohr strength theory as the base, the failure conditions taking into account the time and temperature factors are obtained.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

气腿式凿岩机的使用和故障排除的几种方法

YT— 2 4型气腿式凿岩机在煤矿掘进中广泛使用 ,要科学地使用操作和维护 ,出现机器凿岩速度降低、水针折断、气水联动失灵等故障 ,应分析原因 ,采用有效的措施排除 ,保证生产的顺利进行     

国内外钻探用金刚石复合片性能的研究

主要介绍国内外金刚石复合片性能及采用四高复合片钻探硬岩的初试,为快速钻探提供一个新的途径.     

岩盐钻井水溶双井连通开采工艺的研究与推广

文章就全国井矿盐采区多年的开采工艺技术，进行了系统的研究与总结，并提出了岩盐钻井水溶开采双井连通的各种开采工艺及其关键技术，具有很强的适用性和推广价值。