Numerical Simulation of Deforming Manufacture Process for Automobile Bevel Gear Blank

1 Introduction Rear axle bevel gearis a vital kind of annular accessory with high precision and hugeload availablefeatures ,andit is widely used as the differential drive in automobiles and tractor .In China ,the traditional manufactureapproach of producing the rear axle bevel gear blankis die forging,which not only requires a highinvestment ofproduct equipments , but also involves a low material utilization and great noise .In order to overcome thesedrawbacks , manyresearchers have done a gre…     

基于VME总线的高速A／D缓冲系统的研制

本文介绍一种基于ＶＭＥ总线的高速Ａ／Ｄ缓冲系统的原理和结构。着重阐述了高速数据采集技术，高速ＦＩＦＯ缓冲技术，存储器总线切换技术，ＶＭＥ及ＰＣ／ＩＳＡ总线接口技术在本系统中的成功应用。     

高帧速摄像器

本文介绍了高帧速摄像器的设计、制造、工作和性能。该高帧速有３６０×３６０像素、摄像速度高达５×１０５帧／秒，该摄像器读出电路类似于帧转移ＣＣＤ，由四部分组成     

利用热管纺丝技术一步法生产FCY

利用平板型热管纺丝装置对普通高速纺丝机进行技术改造，并一步法生产出充分结晶的ＰＥＴ纤维（ＦＣＹ）。该纤维可直接用于织造，调节热管温度、热管安装位置可获得满足后道工序不同需要的ＦＣＹ。     

AlSn20Cu/Steel双金属板(带)复合轧制过程的厚度匹配

通过对AlSn20Cu/Steel双金属板(带)复合轧制过程变形区变形规律的分析，确定了轧制过程的总变形率与各分层变形率的关系，解决了实际生产中各分层原料的厚度匹配问题。     

切分轧制技术的发展与应用

简要回顾了近年来切分轧制技术的发展过程，着重介绍了几种典型的切分轧制工艺及其应用，并分析了该技术的发展动向。     

变频调速供水设备在工矿企业给水方面的应用探讨

为把工矿企业供水提高到节能安全可靠性程度上,讨论应用变频调速技术的节能效果,对比恒压变量与变压变量两种方式的节能效果进行对比分析.     

Time series analysis of wind speed using VAR and the generalized impulse response technique

This research examines the interdependence in time series wind speed data measured in the same location at four different heights. A multiple-equation system known as a vector autoregression is proposed for characterizing the time series dynamics of wind. Additionally, the recently developed method of generalized impulse response analysis provides insight into the cross-effects of the wind series and their responses to shocks. Findings are based on analysis of contemporaneous wind speed time histories taken at 13, 33, 70 and 160 ft above ground level with a sampling rate of 10 Hz. The results indicate that wind speeds measured at 70 ft was the most variable. Further, the turbulence persisted longer at the 70-ft measurement than at the other heights. The greatest interdependence is observed at 13 ft. Gusts at 160 ft led to the greatest persistence to an “own” shock and led to greatest persistence in the responses of the other wind series.     

添加高速钢粉对烧结钢组织与性能的影响

研究了添加高速钢粉对烧结钢组织与性能的影响。实验结果表明，含２０％高速钢的烧结钢综合力学性能最好；添加高速钢粉能导致烧结钢密度减小的冲击韧性降低，当高速钢含量增中时，硬度随之增加，烧结钢中残余奥氏体和马氏体的含量与高速钢的含量呈线性关系。烧结钢中的马氏体显微硬度很高，它主要原高速钢粒子和原铁粒子的连接区域形成。     

热宽带钢连轧机调宽轧制工艺参数研究

模拟宝钢２０５０ｍｍ热带钢连轧粗轧机组调宽轧制工艺，得到不同铸坯宽度压下效率、立辊轧制狗骨高度和宽度以及平轧轧制时宽展量等的变化规律。为制定合理的调宽轧制压下规程，Ｒ４机架轧后板坯实现最小切头、切尾损失，最大程度实现连铸坯宽度尺寸集约化提供了可靠的依据。