黑河干流中游地区耗水量变化的历史分析

黑河流域水资源极其匮乏，加之地区上的配置不均衡和中游地区水土资源的过度开发，导致黑河下游出现了严重的生态环境问题，已影响到我国北方广大地区生态环境质量，受到国家的高度重视和全社会的广泛关注。黑河水资源开发利用主要集中在中游地区，该区是全国重要的商品粮、蔬菜和经济作物生产基地之一，耗水量占流域耗水量的85％以上，是黑河的主要耗水区和径流利用区。利用黑河上游控制站莺落峡站和中游控制站正义峡站水文资料，分析了黑河中游耗水量的变化，结果表明：20世纪80年代以前黑河中游耗水量在4．4亿m^3左右，比较稳定；进入20世纪80年代以后，耗水量明显增加，80年代耗水量比70年代以前增加了1．97亿－2.49亿m^3;90年代耗水量又比80年代增加了1.64亿m^3左右；80年代以来流域耗水量呈明显增加的趋势，这是以人类活动影响为主的结果。     

Effects of high molecular weight component on crystallization of polyethylene under shear flow

Crystallization of polyethylene (PE) blends of low and high molecular weight components under shear flow was studied using time-resolved depolarized light scattering (DPLS), focusing on effects of the high molecular weight component on the shish-kebab structure formation. Anisotropic two-dimensional scattering pattern due to shish-like structure formation was observed above a certain concentration of the high molecular weight PE. The threshold was about 2.5-3 times larger than the chain overlap concentration, suggesting an important role of entanglements of the high molecular weight component. On the basis of these results a gel-spinning-like mechanism for the shish-like structure formation has been proposed. The DPLS results also implied that the shish-like structure was mainly formed from the high molecular weight PE. This was confirmed by small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) measurements on an elongated PE blend of low molecular weight deuterated PE and high molecular weight hydrogenated PE (3 wt%).     

蜡晶改进剂对润滑油馏分中蜡组分结晶控制作用的研究

抚顺石油一厂通过大量试验和溶剂脱蜡装置的连续生产证明:加工减二线,套管易上压,滤机上蜡饼泡松易堆蜡,应选用合适的改进剂以控制蜡晶生成树枝状;减四、五线重馏分蜡晶细密,套管不易上压,滤机易失效,应选用和适当加入合适的改进剂以增大聚集状晶体粒度;减三线蜡晶粒度大,为套管上压周期较长,滤机上蜡饼通透性好,滤速快,可根据需要决定是否使用改进剂。提出了针对不同润滑油馏分中不同蜡晶型选用合适的蜡晶改进剂可以相应解决不同馏分的生产难点,提高处理能力,改善产品质量。     

基于主元分析的多变量统计过程的故障辨识技术

为了更好的进行故障检测与诊断，介绍了主元分析理论，给出了基于主元分析的过程故障辨识机理及策略。仿真实例表明，利用此方法建立的故障诊断模型，能够在不依赖过程机理的前提下高效抽取原始数据空间的主要变化信息，对过程的非正常变化做出反应，同时还能较正确地找出发生故障的原因以及相应环节。     

构件重用技术在雷达软件中的应用

随着雷达软件系统技术的发展 ,软件规模、复杂度也越来越大 ,对开发、调试、功能升级等带来难度。文中提出了利用构件技术开发雷达软件系统的思想 ,并给出利用构件技术研制雷达软件系统的基本思路     

CIMS中零件加工特征分类研究

根据某大型制造企业的实际情况，阐述了定义加工特征的依据，给出了零件加工特征的定义及其组成。把加工特征作为对象，提出了分类的原则和面向对象分类方法。对该企业当前生产的零件上所具有的加工特征进行了分类，建立了相应的加工特征对象类树。     

部件试验模态综合的简便方法

本文将一种基于完备模态基的模态综合技术应用于子结构的试验模态综合,获得成功。这种半试验半理论的模态综合方法是一种较为简便的、要求试验工作量较小的试验模态综合法,因为它只要求测量子结构的振动模态和频率即可。数值仿真结果表明,这种简便的试验模态综合法是行之有效的。     

大连电视台分量电视车视频系统设计特点

本文介绍亚州第一台模拟分量电视车视频系统的设计思想,比较详细地阐述了该车的各种功能,总结了不同于复合电视车的新特点。     

Characterization of edible oils,butters and margarines by Fourier transform infrared spectroscopy with attenuated total reflectance

The combination of attenuated total reflectance (ATR) and mid-infrared spectroscopy (MIRS) with statistical multidimensional techniques made it possible to extract relevant information from MIR spectra of lipid-rich food products. Wavenumber assignments for typical functional groups in fatty acids were made for standard fatty acids: Absorption bands around 1745 cm⁻¹, 2853 cm⁻¹, 2954 cm⁻¹, 3005 cm⁻¹, 966 cm⁻¹, 3450 cm⁻¹ and 1640 cm⁻¹ are due to absorption of the carbonyl group, C−H stretch, =CH double bonds of lipids and O−H of lipids, respectively. In lipid-rich food products, some bands are modified. Water strongly absorbs in the region of 3600–3000 cm⁻¹ and at 1650 cm⁻¹ in butters and margarines, allowing one to rapidly differentiate the foods as function of their water content. Principal component analysis was used to emphasize the differences between spectra and to rapidly classify 27 commercial samples of oils, butters and margarines. As the MIR spectra contain information about carbonyl groups and double bonds, the foods were classified with ATR-MIR, in agreement with their degree of esterification and their degree of unsaturation as determined from gas-liquid chromatography analysis. However, it was difficult to differentiate the studied food products in terms of their average chainlength.     

渭河流域水利水保措施减水减沙效益初步分析

截止1989年底,渭河流域共有水库361座,塘坝2666座,引水有效灌溉面积40.4万公顷,治理总面积8136km~2,治理度17.1％。以1970年为效益计算起始年,并将全流域划分为18个片,分别采用水文法和水保法计算1970～1989年间各项水利水保措施减水减沙量及综合减水减沙效益。水文法算得的综合减水效益为24.1％,减沙效益为30.6％;水保法算得的结果相应为29.9％和30.8％,两者相近。