误读与纠正

分析材料试验机度盘偏转角度小 (准确度低 )、试样打滑、定义 (上屈服强度 -下屈服强度 -屈服强度 )模糊、不同应力速率等导致误读 ,并针对误读原因提出纠正方法。     

Improvement of rainwater infiltration and storage capacity by an enhanced seepage well: From laboratory investigation to HYDRUS-2D numerical analysis

Seepage well is an emerging Low Impact Development (LID) technology that can effectively control the storm runoff. However, its rainwater infiltration rate and storage capacity still require further enhancement. By setting a horizontal infiltration structure at the bottom of conventional rainwater seepage well (CSW), an enhanced seepage well (ESW) was proposed in this study, and its infiltration performances compared with the permeable pavement (PP) and the CSW were systemically investigated using static infiltration experiment and HYDRUS-2D simulation. The results showed that the infiltration efficiency of ESW was significantly higher than that of PP and CSW, and the process of water infiltrated through soil mainly controlled the macroscopic infiltration rate. The Nash-Sutcliff Efficient (NSE) index was used to evaluate the accuracy and reliability of the HYDRUS-2D model, and the results of NSE values greater than 0.75 (varied between 0.75 and 0.91) confirmed the applicability of HYDRUS-2D to describe correctly the hydraulic behavior of the ESW system. Simulation infiltration tests showed that the ESW performed a higher average infiltration rate and fewer total runoff volume than the CSW, indicating the effectively enhancement of the infiltration and water retention capacity of ESW, especially under heavy rainfall intensities. Additionally, the ESW system exhibited an excellent runoff-control and rainwater retention capacity in an actual rainfall scenario.     

Two new characteristic parameters for runoff computation

A method capable of estimating the hydrograph from a prescribed storm for a practical mild slope upstream catchment is proposed. This method makes use of two new characteristic parameters, andS, in conjunction with the kinematic wave equation to compute lateral inflows of the main stream of the catchment. The depth profile of overland flow at any instant within the catchment and hydrograph at any location can be easily found. Lag times for individual lateral inflows are then considered and are linearly combined to obtain the hydrograph at the outlet of the catchment or depth profile of the main stream at any instant. The validity of the excess rainfall-surface runoff linear relationship in this study has also been verified with Tatsunokuchiyama catchment, and it shows good results for this computed runoff.     

多目标多约束的集成电路统计优化策略

对于集成电路设计、生产过程中的多目标、多约束统计优化问题,本文提出了“合格率足够高”的优化宗旨,并从概率论的基本原理出发,结合集成电路的特点,导出了一种合格率的近似表述方法,提出的变权重Monte Carlo法编程简便,效率高。采用这些优化策略设计的集成电路合格率优化系统取得了比较好的结果。     

降水和植被变化对龙川江径流量的影响

基于龙川江大峡谷进出口水文控制站楚雄站和小黄瓜园站的长系列水文资料和流域森林盖度变化资料,结合小波分析方法,对降水、植被与径流量变化间相互关系以及径流量各时间尺度准周期变化的本质和形成机制进行了研究。结果表明:研究区降水量序列存在2 a、4 a和14.5 a左右的主周期,径流量序列具有2 a、4 a、6 a和22 a左右的主周期;其中径流量低频振荡所反映的是总径流中来自于壤中水径流和存在于裂隙中的地下水径流的准周期变化,而高频振荡反映的是总径流中来自于地面径流的准周期变化;径流量的年内变化和年际高频振荡主要是由降水量变化所引起的,而径流量序列6 a和22 a的主周期是由土壤和裂隙对降水量序列4 a和14.5 a的主周期滞后放大作用所形成的,径流量序列4 a的主周期是由干热河谷特殊自然地理环境所形成的;径流量与降水量间相互关系在1969年左右发生了突变     

支持向量机及其在径流预测中的应用

给出了支持向量机方法(SVM)的思路、特点及关键之处,探讨了SVM在径流预测中的可能性,并与基于遗传算法的门限回归模型(TR) 进行了对比分析。径流预测实例分析表明,在拟合阶段,SVM模型要好于TR模型;在预留检验阶段,SVM模型与TR模型接近。同时SVM模型适合于小样本情况且能达到全局最优。SVM模型用于径流预测是可行的、优越的。     

Ce对440C不锈轴承钢夹杂物演变的影响

为探究稀土Ce对440C不锈轴承钢中夹杂物的改性作用,利用实验室MoSi₂电阻炉对440C不锈轴承钢进行稀土Ce处理,采用OM、SEM等系统分析了Ce的添加对440C不锈轴承钢脱氧及夹杂物演变的影响。结果表明,随着Ce加入量的增加,其收得率逐渐升高。Ce的加入使钢中TO质量分数由0.002 5%降低至0.001 2%。未加入Ce的钢中夹杂物主要为Al₂O₃、MnS以及镁铝尖晶石;加入质量分数为0.011 5%的Ce后,夹杂物被改性为以Ce-Al-O为主的夹杂物;当Ce的添加量达到0.036 4%时,夹杂物被完全改性为Ce-O-S夹杂物。适量的Ce可以降低夹杂物尺寸及面积比例,但过量加入会使夹杂物尺寸变大。在本试验条件下,当Ce质量分数为0.011 5%时,钢中夹杂物细小弥散效果最明显。以上结论可为Ce在高碳铬不锈轴承钢中的应用提供参考。     

表面微观屈服强度与疲劳极限的关系SCIEI

本文利用X射线对不同碳含量钢的表面微观屈服强度进行了研究。试验结果表明,表面微观屈服强度σ_(ms)远低于整体材料的屈服限,是一个反映表面抵抗塑性变形能力大小的参量。材料光滑疲劳极限往往是由裂纹荫生所控制的,与表面抵抗塑性变形的能力有关。本试验表明不同材料的σ_(ms)与存活率为50％疲劳极限的关系为:σ_(ms)=(0.81—1.02)σ_(-1);40Cr不同热处理状态的σ_(ms)与存活率为99.9％疲劳极限的关系为:σ_(ms)=(0.98—1.10)σ_(-1)。σ_(ms)的测定要比疲劳极限σ_(-1)的测定省时得多,有可能在工程上获得应用。     

铝合金时效-屈服强度的实验与模型化研究

以析出热力学、长大动力学及位错理论为基础，研究了铝合金在时效过程中盘／片状、棒／针状析出相尺寸、体积分数对时效合金强化效果的影响，从微观-宏观相结合的角度建立了具有盘／片状、棒／针状细小时效强化相铝合金的时效工艺-屈服强度量化模型，并通过513K温度下时效Al-Cu-Mg合金和463K温度下时效Al-Mg-Si合金的实验结果对模型进行了验证，取得了较满意的吻合结果，并对本模型的模拟精度与时效析出相参数之间的关系进行了讨论。     

莫莱石－堇青石滤料滤池在生产上的应用

本文对景德镇市黄泥头水厂进行了单层莫－堇滤料滤池和双层莫－堇－煤滤料滤池的生产性试验。试验结果表明：单层莫－堇滤池和双层莫－堇－煤滤池的周期产水量分别是单层砂滤池和双层砂－煤滤池的１．４倍和１．５倍，而且前两种滤池的出水水质优于后两种滤池。