铝合金时效-屈服强度的实验与模型化研究

以析出热力学、长大动力学及位错理论为基础，研究了铝合金在时效过程中盘／片状、棒／针状析出相尺寸、体积分数对时效合金强化效果的影响，从微观-宏观相结合的角度建立了具有盘／片状、棒／针状细小时效强化相铝合金的时效工艺-屈服强度量化模型，并通过513K温度下时效Al-Cu-Mg合金和463K温度下时效Al-Mg-Si合金的实验结果对模型进行了验证，取得了较满意的吻合结果，并对本模型的模拟精度与时效析出相参数之间的关系进行了讨论。     

A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.     

试样长度对 13CrMo44钢管力学性能的影响

研究了试样长度对13CrMo44珠光体耐热钢管力学性能的影响，研究结果表明，随着L0升高，该钢管的伸长率下降并满足δ=16.9% 68.2%√F/L0关系，L0较短时，其对钢管的抗拉强度（σb)和屈服强度（σs)没有什么影响；L0较长时，钢管的σb和σs都稍有下降，解释了产生上述现象的原因。     

马来酸二异辛酯的合成

用对甲苯磺酸作催化剂。以顺丁烯二酸酐和异辛醇为原料，采用醇化学当量过最的方法制取马来酸二异辛酯。研究了催化剂、温度、醇酐摩尔比、反应时间等条件对反应产率的影响，确定了最佳反应条件，并指出合理的产率应该在98．0％-98．5％．     

莫莱石－堇青石滤料滤池在生产上的应用

本文对景德镇市黄泥头水厂进行了单层莫－堇滤料滤池和双层莫－堇－煤滤料滤池的生产性试验。试验结果表明：单层莫－堇滤池和双层莫－堇－煤滤池的周期产水量分别是单层砂滤池和双层砂－煤滤池的１．４倍和１．５倍，而且前两种滤池的出水水质优于后两种滤池。     

Influence of volatile matter and deposited carbon on coke yield from coals

The relations between coke yields and the volatile matter content of 30 individual and 30 blended coals were investigated. Coke yields and deposited carbon related to volatile matter content can be expressed in the following equations: CY (%) = 97.89?0.86 VMch+VMc; and DC (%)= ?2.24+0.16 VMch; where: CY=real coke yield; VMch = volatile matter content of charging coal; VMc=volatile matter content of coke, and in the case of <2%; DC = deposited carbon. The test results show excellent correlation with practice.     

新型CDCM催化剂在两段提升管催化裂化装置上的应用

CDCM催化剂在800 kt·a^－1两段提升管重油催化裂化装置（TSRFCC）上的应用结果表明,该催化剂具有活性高、目的产品选择性好、重油裂解能力强和抗重金属污染能力强的特点。能显著改善产品分布和提高产品质量，在操作条件基本不变的情况下，液态烃收率和总液收分别可提高2.80和0.60个百分点，同时汽油辛烷值和诱导期提高，液态烃中丙烯含量增加。     

Photocurrents and degradation rates on particulate TiO2 layers: Effect of layer thickness, concentration of oxidizable substance and illumination direction

Different routes for immobilization of TiO₂ on conducting substrates were compared to find active and stable photocatalysts, which could either be operated in open circuit (photocatalysis) or with applied electric potential (photoelectrocatalysis). The advantage of applying an electric potential was investigated. Polarization curves and photoelectrochemical degradation reactions served to characterize catalysts and to find a way of predicting the optimum synthesis conditions. The difference between front side (EE) and back side (SE) illumination is discussed as a function of layer thickness, as well as the influence of oxidizable substance concentration on photocurrents. Stability of catalysts was investigated in repetitive degradation experiments.     

FC-26高中油型加氢裂化催化剂的工艺研究

抚顺石油化工研究院研制开发的新一代FC -2 6高中油型加氢裂化催化剂 ,以W -Ni为加氢组分 ,以无定型硅铝为主载体 ,并添加改性分子筛。工艺研究及工业应用结果表明 ,FC -2 6催化剂活性及中油选择性高 ,稳定性好 ,原料适应性强 ,具有广阔的应用前景。     

森林植被改善对鄱阳湖流域径流和输沙过程的影响

以河流基流为切入点,研究流域植被调节径流、水土保持等微观作用影响大中型河流湖泊径流过程和水沙过程宏观效应的机理。鄱阳湖流域60年来天然降水没有发生趋势性变化。流域森林覆盖率由34.73%上升到63.00%,植被质量改善,赣江等入湖河流基流增加83 m~3/s,河流输沙量减少。2000年以后和2000年以前相比较,枯水期降水径流系数增大,年流量过程平坦化,一定程度上减小洪灾风险,有利于水资源利用和生态环境保护。2001年以后进入鄱阳湖泥沙平均每年减少1 007×10~4t;出湖泥沙增加314×10~4t。因此,鄱阳湖入江水道由淤积转变为冲刷,但出湖流量过程没有趋势性变化。