Photoinitiated cationic polymerization using a novel phenacyl anilinium salt

A novel phenacyl anilinium salt, N-phenacyl, N,N-dimethylanilinium hexafluoroantimonate, (PDA), has been synthesized and used as photoinitiator for cationic polymerization of cyclohexene oxide (CHO), butyl vinyl ether (BVE) and N-vinyl carbazol (NVC). Plausible mechanism of the photoinitiation involves the decay of the excited PDA with both heterolytic and homolytic cleavages of carbon-nitrogen bond. Thus, phenacylium cations formed directly or subsequent intermolecular electron transfer, respectively, initiate the polymerization.     

离子交换法合成三氨基胍叠氮酸盐

三氨基胍叠氮酸（ＴＡＺ）分子中的含氮量高达８５．７％，燃烧分解时不仅－Ｎ３可释放３６７ｋＪ／ｍｏｌ的键能，而且放出大量的氮气，是一个提高比冲，降低燃烧温度的理想的推进剂两组分之一。     

微波高压提取快速测定饲料含氟量的探讨

采用微波高压制样技术,快速提取饲料中的氟元素,结合氟离子选择性电极标准添加和电位极差测试方法,能够快速、准确地测试饲料中的含氟量     

High concentration erbium doping of silicon-rich SiO2 thin films on silicon

In this work, high concentration erbium doping in silicon-rich SiO₂ thin films is demonstrated. Si plus Er dual-implanted thermal SiO₂ thin films on Si substrates have been fabricated by using a new method, the metal vapor vacuum arc ion source implantation with relatively low ion energy, strong flux and very high dose. X-Ray photoelectron spectroscopy measurement shows that very high Er concentrations on the surfaces of the samples, corresponding to 10 at.% or the doping level of 10²¹ atoms cm⁻³, are achieved. This value is much higher than that obtained by using other fabrication methods such as the high-energy ion implantation and molecular beam epitaxy. Reflective high-energy electron diffraction, atomic force microscopy and cross-section high-resolution transmission electron microscopy observations show that the excess Si atoms in SiO₂ matrix accumulate to form Si clusters and then crystallize gradually into Si nanoparticles embedded in SiO₂ films during dual-ion implantation followed by rapid thermal annealing. Er segregation and precipitates are not formed. Photoluminescence at the wavelength of 1.54 μm exhibits very weak temperature dependence due to the introduction of Si nanocrystals into the SiO₂ matrix. The 1.54-μm light emission signals from annealed samples decrease by less than a factor of 2 when the measuring temperature increases from 77 K to room temperature.     

Study of Lateral Spread of Ions Emitted from 2.3 kJ Plasma Focus with Hydrogen and Nitrogen Gases

The characteristics of ion beams of hydrogen and nitrogen with different filling pressures emitted from the plasma focus device of 2.3 kJ energy are investigated. CR-39 SSNTDs are employed for the registration of tracks of ions. The exposed detectors are etched in 6N NaOH solution at 70°C and then examined with an optical microscope. The ion flux is estimated to be of the order of 10^5–6 tracks/cm². The flux with the radial position does not exhibit any regular pattern of variation.     

抽余C_4烃中异丁烯催化逆流水合制叔丁醇

采用大颗粒离子交换树脂催化剂,在φ100mm×10m的反应器中进行了异丁烯催化逆流水合制叔丁醇的中间试验。考察了反应温度、水油体积比和抽余C4烃的流速等对异丁烯转化率的影响。试验结果表明,异丁烯催化逆流水合制叔丁醇的适宜操作条件为:反应温度80~90℃,水油体积比为4~5,抽余C4烃的流速为0.45~0.55mm/s。在此条件下,异丁烯的转化率可达88.8%。工业装置运转结果表明,异丁烯转化率大于75%。     

内热式液态合金离子源

本文介绍了一种实用的液态合金离子源结构，我们利用本结构研制成功了Ａｕ－Ｓｉ和Ａｕ－Ｓｉ－Ｂｅ液态合金离子源，测出了它们的发射特性。     

Macroscopic model for multispecies ion-exchange kinetics

A model for multispecies ion-exchange kinetics based on the Nernst-Planck equation is suggested. It is analyzed in comparison with the “locally-determinate” model described by Hwang and Helfferich [1]. The model makes possible simple computation. The conditions for the occurrence of unusual kinetic curves with a maximum are clarified. The proposed model is developed for different types of kinetic problems and verified by the experimental investigation of a kinetics in ternary systems.     

离子注入硅的线源非相干光瞬时退火温度计算

本文利用高温模型,计算了在我们的实验条件下对离子注入硅进行线源非相干光瞬时退火的退火温度,并与实验结果比较,两者符合得较好。     

新型陶瓷与熔融盐复合蓄热材料优化组合的数值模拟

将高温熔融盐相变蓄热材料和陶瓷固相蓄热材料进行复合 ,成功地研制成了能快速吸热和放热且蓄热密度高、蓄热量大的新型复合蓄热材料。分别以Al2 O3 ,MgO ,SiC为代表的陶瓷材料与 6 0LiF 40NaF ,5 0LiF 5 0KF ,6 0 .1NaCl 39.9MgCl2 ,LiH等为代表的 10余种高温熔融盐材料为复合研究对象 ,对复合蓄热材料的蓄热密度等与温度、复合材料中熔融盐的含量、材料种类间的关系进行了数值模拟研究 ,得到了对复合材料的优化设计具有指导意义的结论