γ射线对叶组织电阻变化的影响及动态分析

测试了水稻和烟草两种叶片经不同剂量的^60Co γ射线辐照处理后，组织电阻及离子外渗的动态变化情况。研究结果表明：当超过一定的剂量阈值后，随着辐照剂量的增加，两种植物的叶组织电阻均呈现先上升、后下降的变化规律；叶组织电阻的改变与离子外渗的变化趋势并不一致；用测量叶组织电阻的方法可以较灵敏地体现出植物对γ射线的动态反应情况。运用电生理学的基础理论对上述生理现象的产生原因从机理上进行了分析与探讨。     

高性能磁性液体材料研究进展

解决纳米磁性粒子的耐氧化问题对制备高性能磁性液体具有重要意义。系统介绍了金属磁性液体和氮化铁磁性液体的制备方法，并对各种制备方法进行了评述。综述了磁性液体的耐氧化研究进展，主要是纳米金属粒子的无机物包覆和氮化铁磁性液体的抗氧化剂添加；展望了高性能磁性液体在耐氧化方面的研究趋势。     

Mechanism of heat transport in nanofluids

We have calculated thermal conductivity of alumina nanofluids (with water and ethylene glycol as base fluids) using temperature as well as concentration-dependent viscosity, η. The temperature profile of η is obtained using Gaussian fit to the available experimental data. In the model, the interfacial resistance effects are incorporated through a phenomenological parameter α. The micro-convection of the alumina nanoparticle (diameter less than 100 nm) is included through Reynolds and Prandtl numbers. The model is further improved by explicitly incorporating the thermal conductivity of the nanolayer surrounding the nanoparticles. Using this improved model, thermal conductivity of copper nanofluid is calculated. These calculations capture the particle concentration-dependent thermal conductivity and predict the dependence of the thermal conductivity on the size of the nanoparticle. These studies are significant to understand the underlying processes of heat transport in nanofluids and are crucial to design superior coolants of next generation.     

冷却水污垢及其对冷却器换热的影响

分析了冷却器的结垢机理 ,提出了冷却器污垢层、污垢热阻随运行时间的规律 ,以及污垢热阻与换热系数、换热面积的关系式 ,并通过算例阐述了污垢热阻对冷却器的影响程度 ,进而定性地分析了污垢热阻对空分装置的影响。     

一种中温C/C复合材料抗氧化涂层的制备及其性能

制备了一种工作温度约1 173 K的C/C复合材料抗氧化复合涂层,它由磷酸盐过渡层和陶瓷相阻挡层构成,通过与单一陶瓷相涂层的对比试验研究了它的抗氧化机理。涂覆有该复合涂层的C/C复合材料试样,在空气中1 173 K时氧化10 h的失重率为11.25％,氧化失重率为9.84×10~(-5)g/(cm~2·min),而且其氧化失重率随氧化时间延长而降低;4 h内经过30次从1 173 K至室温急冷急热循环后,失重率为6.38％,涂层基本完好,说明涂层在温度不超过1 173 K时具有良好的抗氧化性和抗热震性。该种涂层适合于中温下C/C复合材料的抗氧化保护。     

Relation between microstructure, properties and spark plasma sintering (SPS) parameters of pure ultrafine WC powder

A combined experimental/numerical methodology is developed to fully consolidate pure ultrafine WC powder under a current-control mode. Three applied currents, 1900, 2100 and 2700 A, and a constant pressure of 20 MPa were employed as process conditions. The developed spark plasma sintering (SPS) finite-element model includes a moving-mesh technique to account for the contact resistance change due to sintering shrinkage and punch sliding. The effects of the heating rate on the microstructure and hardness were investigated in detail along the sample radius from both experimental and modeling points of view. The maximum hardness (2700 HV10) was achieved for a current of 1900 A at the core sample, while the maximum densification was achieved for 2100 and 2700 A. A direct relationship between the compact microstructure and both the sintering temperature and the heating rate was established.     

一种T形高压输电线路故障测距新方法

对T形线路的故障测距，现有方法都是先判断故障支路，再将3端线路等效成2端线路进行测距。但在 T节点附近短路，尤其是经高阻短路时，现有的测距方法由于无法正确判别故障支路而存在一定范围的测距死区。针对上述缺陷，分别假设故障发生在某一支路，由假定正常的2段支路端的电压、电流推算求得 T节点电压和注入假定故障支路的电流，从而分别求得3个故障距离。经证明，求得的3个故障距离有且仅有1个在0和对应支路总长度之间，该距离就是真实的故障距离，故障发生在对应支路上。该方法无需事先判别故障支路即可测距，在 T节点附近经高阻故障时无测距死区。其测距精度理论上不受过渡电阻和故障类型影响，无需故障前数据，且对滤波无高要求。EMTP仿真结果表明该方法正确、有效，测距精度高。     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.     

主战坦克进气系统随车无损检测

简要地介绍了主战坦克进气系统的重要性及无损检测的必要性,在分析总结台架试验过程和国内外主战坦克进气系统随车无损检查的基础上,提出了今后无损检查的改进方向,利用光电技术及时对质量浓度和颗粒尺寸分布报警的检测系统。     

Cr_2O_3对矾土－尖晶石耐火材料抗渣性的影响

以高铝矾土及预合成电熔ＭＡ砂为原料，制各了矾土－尖晶石耐火材料。对其加入铬精矿后的抗渣性进行了试验。结果表明，少量铬精矿的加入能形成尖晶石固溶体，提高制品的抗渣性能。