易溃散覆膜砂的应用及发展前景

介绍了覆膜砂用于轻合金铸件生产时溃散性差的原因和提出了改善的办法,并介绍了其发展前景.     

烷基磺酸钠型砂的质量控制

介绍了控制烷基磺酸钠型砂的混砂工艺、配制要点及保存使用等控制要点，并就实际生产中可能出现的一些问题作了探讨，提出了解决的办法。     

一种新型气硬冷芯盒树脂砂工艺试验及其在生产中的应用

原砂加入2．5％水溶性酚醛树脂，固化剂为甲酸甲脂，加入量占树脂的30％～40％。先把甲酸甲脂在气体发生器中气化，然后再与40％的压缩空气混合，吹气硬化制芯，最高抗拉强度1．2MPa，抗压强度0．32MPa，发气量12mL／g。生产浇注试验表明：砂芯表面光洁，轮廓清晰，尺寸精确，铸件缺陷少，无毒或低毒，和一般冷硬树脂砂比较，成本降低30％。     

Erosion coupled dynamic mesh analysis for location of maximum erosion in 90-degree bends for gas-solid flows

The progressive change in the surface geometry of the component due to erosive wear affects the correct estimation of erosive wear performance and service life of the components handling particulate flows. The current study focuses on determining the change in the location of higher erosion on the bend surface during the pneumatic conveying of solids with continuous geometric modification due to erosive wear. Computational fluid dynamics (CFD) based erosion-coupled dynamic mesh methodology is adopted to simulate the time-dependent surface modification of the 90° bend geometry due to erosive wear. Available experimental data are used to validate the numerical results. Further, the erosion distribution and the location of the maximum erosion for different flow velocities, particle sizes, and bend radius ratios with the increase in solid throughput are investigated. It has been found that the modification in the bend geometry due to erosion influences the location of the maximum erosion. The increase in thickness loss due to erosion increases the variation in the location of the maximum erosion. Furthermore, an equation for predicting the location of maximum erosion of bend geometry is obtained based on the bend radius ratio and the thickness loss.     

The use of an electrothermal plasma gun to simulate the extremely high heat flux conditions of a tokamak disruption

Disruption damage conditions for future large tokamaks like ITER are nearly impossible to simulate on current tokamaks. The electrothermal plasma source SIRENS has been designed, constructed, and operated to produce high density (> 10²⁵/m³), low temperature (1–3 eV) plasma formed by the ablation of the insulator with currents of up to 100 kA (100 s pulse length) and energies up to 15 kJ. The source heat fluence (variable from 0.2 to 7 MJ/m²) is adequate for simulation of the thermal quench phase of plasma disruption in future fusion tokamaks. Different materials have been exposed to the high heat flux in SIRENS, where comparative erosion behavior was obtained. Vapor shield phenomena has been characterized for different materials, and the energy transmission factor through the shielding layer is obtained. The device is also equipped with a magnet capable of producing a parallel magnetic field (up to 16 T) over a 8 msec pulse length. The magnetic field is produced to decrease the turbulent energy transport through the vapor shield, which provides further reduction of surface erosion (magnetic vapor shield effect).     

不锈钢活性炭滤器的氯腐蚀与防腐

本文就活性炭在预处理中脱氯的不锈钢滤器的氯腐蚀机理进行了探讨，并提出了不锈钢活性炭脱氯滤器的防腐方法和措施。     

A method for observing the three-dimensional morphologies of inclusions in steel

A method for observing the three-dimensional morphologies of inclusions by deeply eroding a steel sample with a kind of organic solution composed of bromine water,acetone,and HC1 (volume ratio,45∶45∶10...     

水平井完井方式优选

本文详述水平井完井方式选择的一般步骤,包括井壁稳定性及出砂判断的数学模型、考虑了多种因素对完井方式选择的影响。     

水与可持续发展

论述了水在可持续发展中的地位。当今存在的4大水问题，评估了未来的水形势，提出了解决水问题的途径。