丙烯酸接枝线形低密度聚乙烯的热学行为及结晶形态

利用差示扫描量热仪研究了丙烯酸接枝线形低密度聚乙烯（PE-LLD-g-AA）的热学行为，结果表明，与纯线形低密度聚乙烯（PE—LLD）相比，PE-LLD-g-AA的熔融温度（Tm）略有增加，结晶温度（Tc）增加大约4℃，熔融焓（AHm）随AA含量的增加而降低。还利用差示扫描量热仪研究了PE—LLD和PE—LLD-g—AA的等温结晶动力学，用扫描电子显微镜观察了PE—LLD-g—AA等温结晶形态。结果表明，PE-LLD-g-AA的结晶速率大于纯PE—LLD的，随着接枝率的增加，PE-LLD的球晶半径减小，接枝到PE—LLD分子链上的AA分子起到了成核剂的作用。     

纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

De-oiling contaminated bleaching clay by high-pressure extraction

The disposal and re-use of spent bleaching clay from the vegetable oil processing industry is a problem of growing importance. Although today the only practical way of removal of the spent material is disposal, extraction with organic solvents is a well-known method of de-oiling contaminated bleaching clay. In our investigations we compare the extractibility of two different types of bleaching clays with CO₂ as a solvent. All experiments were carried out with a high-pressure extraction plant. The extraction and separation conditions, temperature and pressure, as well as the CO₂ mass flow, were varied during experiments. The aim of our investigations was a complete separation of the oil from the adsorbent. The latter should then be re-used as bleaching clay. The oil and the bleaching clay were analyzed and tested, respectively. The results show that oil of good quality can be recovered and the bleaching clay still has an activity approximately 50% of fresh clay.     

New results on PWARX model identification based on clustering approach

This paper deals with the problem of piecewise auto regressive systems with exogenous input(PWARX) model identification based on clustering solution. This problem involves both the estimation of the parameters of the affine sub-models and the hyper planes defining the partitions of the state-input regression. The existing identification methods present three main drawbacks which limit its effectiveness. First, most of them may converge to local minima in the case of poor initializations because they are based on the optimization using nonlinear criteria. Second, they use simple and ineffective techniques to remove outliers. Third, most of them assume that the number of sub-models is known a priori. To overcome these drawbacks, we suggest the use of the density-based spatial clustering of applications with noise(DBSCAN) algorithm. The results presented in this paper illustrate the performance of our methods in comparison with the existing approach. An application of the developed approach to an olive oil esterification reactor is also proposed in order to validate the simulation results.     

Bauxite residue (red mud) increases phosphorus retention in sandy soil catchments in Western Australia

The Peel-Harvey estuary on the Swan Coastal Plain, Western Australia has become eutrophic partly because of the leaching of fertiliser phosphorus from sandy soils. The acid, coarse textured sandy soils are predominantly quartz, have a low iron and aluminium content and do not retain phosphorus. Red mud, derived from bauxite, is a by-product of the alumina industry and has the ability to retain phosphorus. Retention of phosphorus is enhanced when the red mud is neutralised with gypsum. Red mud has been suggested as a soil amendment to reduce phosphorus leaching.To investigate the reduction in the leaching of phosphorus from soils amended with red mud, weirs were constructed at the outlets from a pair of catchments to quantify the amount of phosphorus in the streamflow. Both catchments were deep grey Bassendean sand. One of the catchments was treated with 80 t/ha of red mud which had been neutralised with waste gypsum from the phosphate industry. The red mud was applied to the soil surface using conventional fertiliser spreading equipment. The other catchment was untreated.The red mud reduced phosphorus loss by 70% from 13.8 kg/ha on the untreated catchment, to 4.2 kg/ha on the treated catchment. Both catchments were treated with 20.4 kg/ha of phosphorus as superphosphate. The catchment treated with red mud also received a further 41.5 kg/ha of phosphorus from the phosphogypsum that was used to neutralise the red mud.Our results show that red mud reduces phosphorus leaching and is potentially a nutrient management option in sandy soils. Red mud has the potential to reduce the impact of agriculture on the estuarine environment and has implications for the continued expansion and intensification of agriculture in the Peel-Harvey catchment.     

混合物MH-81状态方程的研究——从无限稀释活度系数预测混合物汽液平衡

本文由无限稀释活度系数求取混合物MH-81状态方程的二元相互作用参数,预测了二元混合物的汽液平衡,获得了较满意的结果。     

多CPU控制器在大功率整流控制系统中的应用

介绍了利用多CPU来设计整流控制器，解决大功率整流装置产生的磁场对整流计算机控制系统产生的干扰。     

虚拟场景中有宽度物体移动路径的优化方法

提出一种虚拟场景中有宽度物体移动路径的优化方法,在地图掩码数据经过寻路算法搜索后,得到一组连续路径节点组成的节点集,从起始节点出发,沿着路径节点找出离起始节点最远且没有障碍物遮挡的可见节点,作为下一个起点,循环往复直至节点集的终止节点,并顺序连接这些可见节点,即可得到优化路径。通过合并节点集中的多余节点,使路径更平滑,从而减少物体移动过程中改变方向的次数,解决有宽度物体无法通过狭窄通道后,须重新计算路径的问题,达到了更好的用户体验效果。     

SSI:一种IPv6/IPv4多址同源识别模型

IPv6/IPv4共存环境下多址同源识别是共存网络管理与拓扑发现的一个关键问题。现有研究主要集中于子网内部的双栈发现及单一IP协议栈中的别名解析,难以识别远程IPv6/IPv4共存网络中的多址同源。通过分析同源地址间的本质联系,提出一种IPv6/IPv4多址同源识别模型(SSI),该模型综合利用特殊地址格式匹配、TCP时钟指纹比对和上层协议短时致瘫等多种方式来提高同源地址的识别能力。实验结果表明,上述方法均可有效识别IPv6/IPv4多址同源;SSI模型具有较理想的识别率和正确率。