蒸发过程中饱和土壤水稳定同位素运移规律浅析

基于Fick定律和质量守恒定律推导了饱和土壤水在蒸发过程中的稳定同位素微分方程模型,分析了饱和土壤水的边界条件,给出了解析解,为数值模拟蒸发、蒸发过程中土壤水的稳定同位素组成变化提供了确定性的数学基础,对土壤水分运动以及土壤水稳定同位素的研究具有一定的理论意义.     

泄洪雨雾输运的数学模型研究

针对泄洪雨雾在河谷中的对流与沉降问题,提出一种3维有限元计算模型,该模型通过对浓度梯度矢的求解,可保证浓度计算的非负性与单调性.同时,根据气象学中雨滴谱函数与水滴沉降速度等概念,导出雨雾浓度与降雨强度间的定量转换关系,使其与其他雾化近区数学模型实现边界耦合.运用本文模型对瀑布沟电站泄洪洞雾化分布进行模拟,计算结果与真实的物理规律相一致,为今后类似工程问题的研究提供了适用手段.     

膨胀石墨的饱和吸附量与微观结构的关系

采用不同的方法测定膨胀石墨对不同油质的饱和吸附量,来探讨膨胀石墨的结构与饱和吸附量的关系.由扫描电镜可知,膨胀石墨具有较大的比表面积,其孔结构是以中、大孔为主;蠕虫石墨的表面结构与其内部结构不同,其内部为典型的片层结构.通过观察石墨内部孔结构特征变化,可以分析膨胀石墨对油的去除效率以及影响因素.     

煤尘爆炸特征参数影响因素研究

采用20L球形爆炸装置研究了煤尘粒径、浓度、点火能量对煤尘爆炸最大压力、爆炸最大压力上升速率的影响。研究结果表明,在煤尘粒径一定的条件下,随着煤尘浓度的增大,爆炸最大压力及爆炸最大压力上升速率先增大后减小,煤尘浓度在400~480g/m3之间取得爆炸最大压力最大值0.94MPa、爆炸最大压力上升速率最大值28.79MPa/s;在煤尘浓度一定的条件下,爆炸最大压力不随煤尘粒径的减小而单调变化,爆炸最大压力上升速率随煤尘粒径的减小而逐渐增大;随着点火能量的增大,爆炸最大压力及爆炸最大压力上升速率明显增加。     

多段螺旋溜槽在选别硫酸厂烧渣中的应用

硫酸厂排出的含铁５０％左右的烧渣，过去仅作为水泥的添加剂，价格低。利用多段螺旋溜槽经过一次选别，可以获得含铁品位大于５５％的铁精矿，供炼铁使用。回收率约５０％，精矿价格提高５～６倍，其分选尾矿仍然可以作水泥的添加剂。分选效果表明，多段螺旋溜槽与普通的螺旋溜槽相比，在品位相当的情况下，回收率提高５％左右。     

Phosphate sorption isotherms in relation to P nutrition of wheat (Triticum aestivum)

The phosphate sorption isotherms are needed to explain differential plant responses to P fertilization in soils. Laboratory and greenhouse experiments investigated the use of phosphorus sorption isotherms in relation to P fertilizer requirement of wheat in ten benchmark soils of Punjab, India. The modified Mitscherlich Equation (3) was used to describe plant response observed in different soils. Maximum obtainable yield (MOY) ranged from 11.6 g pot^–1 in Gurdaspur (I) sandy clay loam to 7.0 g pot^–1 in Nabha sandy clay loam. Response to P applied @ 25 mg P kg^–1 soil was maximum (77%) in Bathinda sand and minimum in Chuharpur clay loam (33%). The response curvature varied from 3.74 × 10^–2 in Nabha sandy clay loam to 4.43 × 10^–2 in Kanjli sandy loam. The soil solution P required to produce optimum yield (90% MOY) varied from 1.61 µg ml^–1 in Bathinda sand to 0.10 µg ml^–1 in Sadhugarh clay. Dry matter yield obtained at 0.2 µg ml^–1 solution P concentration ranged from 55% in Bathinda sand to 85% of MOY in Gurdaspur (II) clay loam. At the same solution P concentration (0.1 µg P ml^–1), dry matter yield was 91% in Sadhugarh clay, 80% in Gurdaspur (II) clay loam and, 43% of MOY in Bathinda sand and eventually coincided with the decreasing maximum buffer capacity (MBC) in these soils. At the same level of sorbed P (100 mg P kg^–1 soil) the yield was observed to be inversely proportional to MBC. The study, therefore, concludes that, soils should be grouped according to their P sorption characteristics and MBC before using critical soil solution P as a criterion for obtaining optimum yields.     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.     

Relationship of structure to properties of surfactants. 16. Linear decyldiphenylether sulfonates

The properties of some well-characterized sodium linear decyldiphenylether (C₁₀DPE)sulfonates have been studied. Among the properties investigated are dynamic and equilibrium surface tension, critical micelle concentration (CMC), area per molecule at the aqueous solution/air interface, wetting time by the Draves technique, foaming by the Ross-Miles method, solubilization, and hydrotropy. The decyldiphenylether moiety appears to be equivalent to a terminally substituted straight alkyl chain of 16 carbon atoms. The trialkyl- and dialkyl-mono-sulfonates have solubilities of < 0.01 g/dm³ in water, but are readily soluble in hexane. The didecyldiphenyl ether disulfonate (DADS) has a very low CMC value (1.0 × 10⁻⁵ mol dm⁻³) in aqueous 0.1 N Na⁺ solution (NaCl), characteristic of surfactants with two hydrophilic and two hydrophobic groups. It also has a much larger area per molecule at the aqueous solution/air interface than the monodecyldiphenyl-ether monosulfonate (MAMS) and a much higher surface tension at the CMC. MAMS has a much lower surface tension at a surface age of 1 second (γ_1s) than either DADS or the monodecyldiphenylether disulfonate (MADS). In agreement with γ_1s and γ_eq values, wetting times increase in the order: MAMS < DADS < MADS and initial foam heights decrease in the order: MAMS > DADS > MADS. Solubilization for three water-insoluble surfactants decreases in the order: DADS > MAMS > MADS, while hydrotropy is most pronounced with the disulfonates.     

电渗析回收亚氨基二乙酸的实验

通过电渗析回收亚氨基二乙酸的实验研究,考察了不同类型离子交换膜在等电点状况下电渗析脱盐率与有机物损失率之间的关系,并确定了浓差扩散的有效控制方式。实验结果表明,采用电渗析法能够有效处理亚氨基二乙酸废水,电渗析脱盐率>96%,亚氨基二乙酸损失率<0.6%。     

变压吸附的实验研究

利用变压吸附装置，采用5A分子筛及硅胶两种吸附剂，对CO2与N2混合气体，及CO2与O2混合氧化分别进行实验研究，测出了不同操作条件下的穿透曲线，描述了吸附机理，分析了穿透曲线的影响因素。