An approach to textile dye removal using sawdust from Aspidosperma polyneuron

The textile industry is responsible for discarding wastewater contaminated with dyes. The timber industry generates waste in the form of sawdust. The aim of the present study was to evaluate the adsorptive potential of sawdust obtained from the Aspidosperma polyneuron tree for the removal of the textile dye from wastewater. Sawdust was subjected to different pre-treatments (acid, alkaline and polyethyleneimine) in order to increase its adsorption capacity. Based on the results from the isotherms, treatment with polyethyleneimine (PEI) led to the greatest adsorption capacity and fits the Freundlich model, indicating cooperative adsorption. Other treatments with sawdust best fit the Langmuir model, but the untreated sawdust presented better results than the treated sawdust. These results were only surpassed by sawdust treated with PEI. A. polyneuron revealed good potential for use as an adsorbent to remove dyes, which is a novel result, since to date there is no study on its use as a sorbent material.     

Fatty acid composition and sensory properties of Wels catfish (Silurus glanis) hot smoked with different sawdust materials

This study aims to compare chemical, physical and sensorial parameters of the Wels catfish (Silurus glanis), hot smoked using vine, poplar, lemon tree and oak sawdust as well as corncob. Significant differences (P < 0.05) in proximate composition were found between fresh and smoked samples; however, the changes in fatty acid composition were less significant. In the fatty acid composition of control group, monounsaturated fatty acids (41.60%) had the highest share in fatty acids, which was followed by saturated fatty acids (29.95%) and polyunsaturated fatty acids (28.34%). The major fatty acids were observed to be C16:0, C18:0; C16:1 n‐7, C18:1 n‐9c, C18:1 n‐9t and C18:2 n6c. There were significant differences (P < 0.05) between the groups considering their colour measurement results. General preference criteria such as appearance, odour, texture, colour and taste were chosen for the sensorial analysis, which were rated by the panellists. According to the results of overall appearance, the fillet pieces smoked with lemon tree (9.00), poplar (8.66), corncob (8.00), oak (7.33) and vine (5.33) sawdust were determined as the most preferred, in order.     

Flexural properties of sawdust reinforced phenolic composites: Pilot study

The advantageous properties of sawdust and phenolic resins were combined by making sawdust reinforced phenolic composites with different percentages by weight of sawdust. The sawdust was divided into three grades in accordance with its particulate size. Garamite and propylene glycol were added individually and together to enhance the flexural properties of the composites obtained. Without any garamite and propylene glycol, it was discovered that the best flexural properties of the composites were obtained when the percentage by weight of sawdust (<300 μm) is up to 15%. Beyond this, the flexural properties dropped significantly; in addition, the fluidity of the composite was very low and the mixture was not suitable for casting. In general, the flexural modulus of the composites decreases with an increase in sawdust content, i.e., they are more elastic but their maximum flexural strain does not improve. Garamite was therefore added to improve the maximum flexural strains of the composites and this was successful. The addition of propylene glycol makes the composite more plastic. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

细颗粒木屑在鼓泡流化床中流化速度的研究

流化床气化反应器是生物质能源热化学转化反应的关键设备,流化条件的控制和确定,直接影响到转化反应的质量和效率.试验研究了在分布板开孔率为2%～4%,以粒径d＜0.28 mm的细颗粒木屑为原料,床层高度为0.4D,0.8D,1.2D,1.6D,2.0D(D=183 mm,D为有机玻璃管内径)的冷态条件下木屑的流化速度变化情况.结果表明:以木屑为原料,分布板开孔率和床层高度对细颗粒木屑的临界流化速度的影响不大.     

木屑在Loop seal型返料器中的流动特性研究

在冷态实验条件下,对内径为0.28m,高为10.0m的循环流化床中木屑颗粒在Loop seal返料器中的流动特性和规律进行了研究,重点考察了提升管操作气速Ug、Loop seal返料器的输送风量Q1和侧向吹风量Q2改变对颗粒循环流率Gs的影响。实验发现,改变提升管操作气速Ug对循环流率的影响不大;通过Loop seal的颗粒循环流率Gs随着输送风量Q1和侧向吹风量Q2的增加而增大;改变侧向吹风量对循环流率的影响要比改变输送风量大得多。根据实验结果,对王擎给出的循环流率Gs的计算关联式进行了修正。     

Kinetic and equilibrium modeling of liquid‐phase adsorption of lead and lead chelates on activated carbons

The sawdust (SD) waste generated in the timber industry was converted to a low‐cost activated carbon (SDAC) using a simpler and cheaper activation process, single‐step steam pyrolysis activation. The possibility of utilizing SDAC for the removal of lead (Pb(II)) in the absence of ligands and nitrilotriacetic acid (NTA) and ethylenediaminetetraacetic acid (EDTA) chelated Pb(II) complexes from the liquid phase was examined and the results were compared with those for commercial activated carbon (CAC). SDAC shows a high adsorption capacity for Pb(II) and Pb(II) chelates compared with CAC. The extent of adsorption of Pb(II) and Pb(II) chelates on activated carbons was found to be a function of solution pH and species distribution of Pb(II) and Pb(II) chelates. The optimum pH range for the removal of Pb(II) in the absence of ligands by SDAC was 6.5–8.0, whereas its maximum removal by CAC was observed at pH 6.5. In the presence of ligands, the extent of Pb(II) adsorption was enhanced in the pH range 2.0–5.0 and was reduced significantly in the pH range 6.0–8.0. The maximum uptake of Pb(II) chelates for both carbons was observed at pH 5.0. Kinetic models such as pseudo‐first‐order, pseudo‐second‐order and pore diffusion were tested to investigate the adsorption mechanism. Batch kinetic studies showed that the adsorption of Pb(II) from aqueous solutions with and without ligands could be best described by a psuedo‐first‐order model for both carbons. The effect of pH on the adsorption isotherms of Pb(II) and Pb(II) chelates was also investigated. The applicability of the Langmuir and Freundlich isotherms, established for various initial concentrations of the adsorbate and for different pH values, was tested at 30 °C. Copyright © 2003 Society of Chemical Industry     

On the practicability of a new bio sorbent: Lasani sawdust and coconut coir for cleanup of oil spilled on water

In this article, two bio-sorbents have been selected: lasani sawdust (LS) (a new bio-based material) and coconut coir (CC) for the removal of used motor oil from the aqueous phase. The physical nature of the materials was characterized using Fourier Transform Infrared Spectroscopy and Constitutional Analysis of lignin and cellulose. The adsorption process was evaluated using various kinetic and adsorption models. The evaluated sorption capacities for coconut coir and lasani sawdust were 12.82?g g^?1 and 0.36?g g^?1, respectively. Maximum sorption of oil from the aqueous solution conveniently took place in 20?minutes. To ascribe statistically which model describes the adsorption phenomenon best, Root Mean Square Error (RMSE) and Average Relative Error (ARE) were used. The kinetics of the adsorption was best described by Pseudo-second order. Similarly, Langmuir isotherm model had the least value for the two error functions and a higher q_max value for coir than for lasani. It was concluded that the increased absorptive ability of coir over lasani was due to the difference in the composition of lignin and cellulose of the two materials.     

Physiochemical structure of semicoke derived from co-carbonization of coal and sawdust blends

The substitution of coal blending with sawdust had been widely investigated for metallurgical coke production. In this paper, the physiochemical structures of the semicoke derived from sawdust/coals blends co-coking were characterized by several analytical techniques including FTIR-ATR, XPS, NMR, OM, and SEM. Meanwhile, the influence of the sawdust on the physicochemical properties of the sawdust/coals blends were also investigated. Results indicated that partial substitution of coal blending with sawdust benefited from the formation of colloid and optical anisotropy due to the positive synergetic effect, whereas high proportion of sawdust (>10 wt%) inhibited the agglomeration of semi-coke. On the other hand, the semicoke consisted primarily of aromatic carbons replaced by the oxygen linked to carbons and aliphatic carbons when the coal blending was replaced by high proportion of sawdust, causing a less polyaromatic graphite-like structure formation in the semicoke.     

改性木屑处理六价铬的研究

利用甲醛和硝酸对木屑进行改性,得到甲醛改性木屑和硝酸改性木屑,并比较了2种改性木屑对铬(Ⅵ)的吸附能力,同时探讨了木屑用量、酸度、铬(Ⅵ)的初始质量浓度、时间等因素对吸附效果的影响,废水铬离子的质量浓度为100mg/L时,最佳吸附条件为:pH值1.0,木屑用量1.5g/15mL,吸附时间60min。用2种改性木屑处理含铬(Ⅵ)废水,都取得满意的效果,吸附率达到99.9%。